Now, two research groups have engineered new optogenetic proteins that can be used to efficiently silence neurons. One of the two new proteins comes from the lab of Karl Deisseroth, a psychiatrist and neuroscientist at Stanford University who helped develop optogenetics as a research tool. His group’s new “off” switch for neurons was created by changing 10 of the 333 amino acids in an existing optogenetic protein, which itself had been engineered by combining natural proteins from green algae. That advance “creates a powerful tool that allows neuroscientists to apply a brake in any specific circuit with millisecond precision,” said Thomas Insel, director of the National Institute of Mental Health, in a released statement. The other new silencing protein, developed by scientists at the Humboldt University of Berlin and collaborators, was created by changing amino acids in the same existing optogenetic protein. 

Some researchers are also looking to optogenetics as a potential treatment for patients with a variety of conditions (see “For Mice, and Maybe Men, Pain Is Gone in a Flash,” and “Flipping on the Lights to Halt Seizures”) but there are huge challenges to overcome. The method requires genetic modification of cells to make them light-sensitive. It also requires implanted light sources for all but the shallowest of nerve endings.

Address of the bookmark: https://doc-openbio.readthedocs.io/projects/seqmule/en/latest/

where, c is the count of a k-mer from reads, m is the mode of counts of read k-mers, and n is the copy of the k-mer in the assembly.

Address of the bookmark: https://github.com/liu3zhenlab/KAD

SCHOOL OF COMPUTATIONAL AND INTEGRATIVE SCIENCES (SC&IS)

ESSENTIAL QUALIFICATION : - M.Sc./M.Tech. in Physics/ Chemistry/ Biology/ Mathematics/ Statistics/ Bioinformatics/ Computational Biology. Ph.D. in the broad areas of Bioinformatics/ Computational Biology. Candidates must have demonstrated capabilities in terms of high impact research publications in either of the above mentioned areas.

Scale of Pay : - 15600-39100/- (PB-III) AGP Rs. 6000/-

For more details on Centre/School, Specializations etc. please visit JNU website www.jnu.ac.in or contact Section Officer, Room Nos. 131-132, Recruitment Cell, Administrative Block, JNU, New Delhi – 110067, Email: recruitmentjnu2013@gmail.com The last date for the receipt of application is 15 May, 2014.

http://www.jnu.ac.in/Career/

http://www.jnu.ac.in/Career/ADVTNo_RC_48_2014.pdf
Last Apply Date:

15 May 2014

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

More at https://www.biologiaevolutiva.org/gonzalez_lab/

WALK- IN –INTERVIEWS

Eligible candidates may appear in Walk-in-Interview on May 23, 2014 at 10 AM for the posts of Research Associates & Senior Research Fellows (SRF) in the following DST/DBT/ICAR funded projects.

1 NPTC Project on Bioinformatics and Comparative Genomics

Research Associate (One)

Rs. 24000/- + 30% HRA for masters degree holder with more than 4 years experience

Essential: Ph D in Plant Molecular Biology & Biotechnology/Genetics 0r Candidates who have already submitted their Ph D thesis in above subjects

Desirable: Research experience in Genomics, Molecular biology, Microarrays analysis, Gene cloning, transgenic Techniques , and computational analysis.

Senior Research Fellow ( UGCCSIR/ DBT/ ICAR Net qualified only): (One)

Rs. 16000/- + 30% HRA and Rs. 18000+30 HRA from 3rd year onwards

Essential:

1. ICAR/ UGCCSIR/DBT Net qualified only

2. M. Sc. (with thesis) in Biotechnology, Life Sciences, Biosciences/ Bioinformatics, Genetics/ Plant Pathology with experience in molecular biology.

Or M.Sc with more than 3 years research experiences

3. B.Sc. Agriculture or Biology

Desirable:
1. M. Sc. with thesis
2. Experience in molecular biology, plant tissue culture
3. Bioinformatics knowledge is important

2 DST JC Bose National Fellowship

Research Associate (Bioinformatics) : One

Rs.22000/- + 30% HRA for 1 & 2nd Yr., Rs. 23000+ 30% HRA for 3rd year and Rs. 24000+30% HRA for 4th &5th yr

Essential: M Ph D in Plant Molecular Biology & Biotechnology/Genetics

Desirable: Research experience in Genomics, Molecular biology, Microarrays analysis, Gene cloning, transgenic Techniques , and computational analysis.

Age limit: Max.35 years (Age relaxation of 5 years for SC/ST & women and 3 years for OBC)

The posts are purely temporary in nature and are co-terminus with the project. Initially the offer will be made for one year only and may be further extendable based on performance of the candidate. The interview will be held on May 23 , 2014 at 10:00 AM at NRCPB, LBS Building, Pusa Campus, IARI, New Delhi- 110012. The candidates must bring four copies of biodata (in the prescribed proforma), original certificates, attested photocopies of each of the certificates and an attested copy of recent passport size photograph. No. TA/DA would be given for the appearance in interview. Only the candidates having essential qualification would be entertained for the interviews. Short-listing of candidates based on academic merit and experience will be done in case of large number of applicants.

Advertisement: http://www.nrcpb.org/sites/default/files/Advertisement%20for%20RA%20and%20SRF%20Position.pdf

https://ftp.ncbi.nlm.nih.gov/refseq/release/viral/

Address of the bookmark: https://ftp.ncbi.nlm.nih.gov/refseq/release/viral/