August1-2, 2014

Organised By

Centre of Excellence in Bioinformatics
Bioinformatics Infrastructure Facility
Department of Biochemistry
University of Lucknow
Lucknow-226007

Course Contents

Molecular Modeling
Homology Modeling
Molecular Docking
Post-structural Analyses

Molecular Dynamics (MD)
Simulation
Linux Introduction
Gromacs Installation

MD Simulation of Protein ligand complex
Analyses of MD
Trajectories
Visualization of Dynamic
complexes

Important Dates

Registration Begins June 25, 2014
Registration Closes July 25, 2014

Brochure : www.lkouniv.ac.in/conference/Brochure_August,%202014.pdf

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator 

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM 

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq 

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer 

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView 

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI 

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview 

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR 

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA 

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV) 

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite 

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

Reference

Cuccuru G1, Orsini M, Pinna A, Sbardellati A, Soranzo N, Travaglione A, Uva P, Zanetti G, Fotia G. (2014) Orione, a web-based framework for NGS analysis in microbiology. Bioinformatics [Epub ahead of print]. [article]

Address of the bookmark: http://orione.crs4.it/

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

Most people who have a balanced translocation have the right amount of chromosome material but it has been rearranged in some way. This may happen if two chromosomes swap pieces (a reciprocal translocation). In other cases two whole chromosomes may become stuck together (a Robertsonian translocation). This page describes what happens when someone has a reciprocal translocation.

Reciprocal chromosomal translocations occur following double-strand breaks (DSBs) in DNA when a section of one chromosome is exchanged with that of another, non-homologous chromosome. These exchanges may produce a dysfunctional fusion gene that disrupts cell growth and survival pathways, such as the translocations seen in leukemia and childhood sarcomas.

Chromosomal translocations have been well studied in cancer cell lines which are associated with two types of cancer, acute myeloid leukemia and Ewing's sarcoma, but determining how they contribute to cancer development is complicated by additional mutations and altered gene expression profiles in these cultured cells. Now, Juan Carlos Ramirez, head of the Viral Vector Facility at the Fundacion Centro Nacional de Investigaciones Cardiovasculares (CNIC) and his colleagues Raul Torres at CNIC and Sandra Rodriguez-Peralez at the Spanish National Cancer Center (CNIO) in Madrid, Spain have used a new genome editing tool, CRISPR-Cas9, to induce chromosomal translocations for the first time in a human cell line and in primary cells. The study's authors conclude by stating that the use of this technology will allow for the clarification of how and why chromosomal translocation occurs, which without doubt will allow new anti-cancer therapeutic strategies to be tackled.

Using RNA-Guided Endonuclease (RGEN) technology or CRISPR/Cas9 genome engineering technology, CNIO and CNIC researchers have shown that it is possible to obtain such chromosomal translocations. The CRISPR-Cas9 system is extremely simple to introduce a cut at the desired locus, easier to design, and cheaper than many other systems. Using the CRISPR-Cas9 system, Ramirez and his colleagues reproduced the translocations observed in Ewing’s Sarcoma (ES) and Acute Myeloid Leukemia (AML) patient cell lines in HEK293 cells and also generated the ES translocation in human mesenchymal stem cells and the AML translocation in umbilical cord blood cells.

By focusing on chromosomal translocation without the confounding characteristics of established cell lines, these new cells lines should help answer the fundamental question of what causes a cell to become cancerous. Ramirez and his team now look forward to modeling other chromosome translocations in a variety of cell types.

Reference:

http://en.wikipedia.org/wiki/Chromosomal_translocation

http://www.nature.com/ncomms/2014/140603/ncomms4964/abs/ncomms4964.html

Address of the bookmark: https://www.molinspiration.com/

Brief description: We are looking for suitable candidates in the area o computational biology/bioinformatics/genomics or related field for next-generation sequencing (NGS) data analysis for small-RNAs, RNA-Seq and targeted resequencing of plants and associated organisms. We are an interdisciplinary group where projects equally involve bioinformatics and systems biology (specially microarrays and next-generation sequencing (NGS) data analysis and its use), along with plant molecular biology, genetic engineering, field biology, and analytical plant chemistry for understanding response of plants to biotic stresses.

Essential qualification: MSc/BTech/MTech/PhD (or other suitable qualification) in disciplines preferable to bioinformatics, computational biology, computer application (or equivalent)/ ‘Advance Post-Graduate Diploma in Bioinformatics’. Proficiency in programming languages (such as Perl, C++) and/or statistics (proficient in R for example) is compulsory.

Desirable qualification: Experience in the field of genomics e.g. microarray analysis, NGS, genome annotation, database development and management, software development, systems and network biology (or related fields) will be preferred.

Application process: Applications should contain CV along with brief description (maximum 1 page) of research conducted (highlighting skills and experience) till now. Applications should be sent by e-mail to Shree Prakash Pandey, Department of Biological Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur Campus, WB, India within 14 days of this advertisement.

E-mail: sppiiserkol@gmail.com, sppandey@iiserkol.ac.in

Advertisement:

http://www.iiserkol.ac.in/announcements/adverts/671-advt_ra_shree_prakash_july_2014

More at https://dahak-metagenomics.github.io/dahak/

Address of the bookmark: https://github.com/dahak-metagenomics/dahak

Scientists with a long-running Framingham Heart Study looked at 1,932 people (examination of about 1.5 million markers of genetic variations), comparing unrelated friends to unrelated strangers. They found that friends shared about 1% of their genes — a percentage much higher than those shared with strangers.This new findings made it clear that people have more DNA in common with those who are selected as friends than with strangers in the same population. 

The genes that lined up the most were olfactory genes, which deal with smell. The ones that lined up the least were immune system genes. The researchers weren't sure why that happened :/. Olfactory genes might be a straightforward explanation: People who like the same smells tend to be drawn to similar environments, where they meet others with the same tendencies.

Reference:

http://www.pnas.org/content/111/Supplement_3/10796.full

Image : http://i.kinja-img.com

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD