BOL: Related items

Assistant Professor @ King Saud University Riyadh

Fri, 21 Feb 2014 05:57:18 -0600

Qualifications: Candidates must have a Ph.D. and a strong background in Molecular and Cellular Biology, protein expression, FACS, or computational biology, and ability to work collaboratively.

This position will have a significant focus on providing analytical support for next generation sequencing data analysis – Exome-sequencing, Targetted sequencing as well as high-throughput genotyping on Illumina platform.

Job location:

Genome Research Chair
King Saud University, Riyadh-11451
KSA

Interested candidate may forward their CV to grcksu@gmail.com

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

SRF position in Computational Systems Biology Computational biology Group, IIIT-Delhi

Sun, 23 Feb 2014 20:56:08 -0600

An opportunity to perform research in DST supported project that involves building of mathematical models to understand the functional relationship between circadian rhythms and memory formation under stressful condition. In this project, mathematical model of circadian rhythms based on gene regulatory mechanisms will be unified with the mathematical model of calcium signal transduction pathway to understand and predict the formation of fear memory under stressful conditions. The research scholar will spend full time on this project to build new models and expected to contribute significantly to prepare the results for publication and presentation, and to contribute to grant proposals.

Required Qualifications: Masters in physics/chemistry/mathematics (or) MTech in bioengineering, chemical (or) Masters in any traditional field of science with outstanding performance throughout the program. Candidate should have cleared GATE/UGC-CSIR examinations. Applicant should have done basic mathematics courses like calculus, differential equations, numerical analysis etc in their degree program and have obtained good grades in those courses. Knowledge of MATLAB and C or at least one traditional programming language is absolutely necessary. Strong inclination to understand biological concepts is a must for this research work as this project is about modeling biological systems.

Salary: A fixed salary of Rs 18000 PM including HRA will be paid.

Last date for application: This advertisement is open until suitable candidate is found for the project.

Preferred Qualifications: - Expertise in dynamical systems theory, bifurcation theory, numerical simulations, parameter estimation.

Independence and high motivation for carrying out interdisciplinary research. - Excellent communication skills and ability to work independently. - Good working habits.

Interested candidates should submit both curriculum vitae and statement of interest in PDF format to sriramk@iiitd.ac.in and should clearly mention in the subject "Application for SRF".

nQuire: A statistical framework for ploidy estimation using NGS short-read data

Jit — Thu, 31 Jan 2019 05:12:19 -0600

nQuire implements a set of commands to estimate ploidy level of individuals from species, where recent polyploidization occurred and intraspecific ploidy variation is observed. Specifically, nQuire uses next-generation sequencing data to distinguish between diploids, triploids and tetraploids, on the basis of frequency distributions at variant sites where only two bases are segregating.

For more background see also the publication at BMC Bioinformatics.

https://github.com/clwgg/nQuire

Address of the bookmark: https://github.com/clwgg/nQuire

Landry Lab

Thu, 17 Jul 2014 14:33:57 -0500

EVOLUTIONARY AND INTEGRATIVE CELL BIOLOGY

Our research is at the crossroad between cell biology, ecological genomics, systems biology, molecular evolution and population genetics. We study the architecture and evolution of protein and signalling networks.

More at http://landrylab.ibis.ulaval.ca/

ClinCNV: Detection of copy number changes in Germline/Trio/Somatic contexts in NGS data

Neel — Thu, 16 Jan 2020 23:16:02 -0600

ClinCNV detects CNVs in germline and somatic context in NGS data (targeted and whole-genome). We work in cohorts, so it makes sense to try ClinCNV if you have more than 10 samples (recommended amount - 40 since we estimate variances from the data). By "cohort" we mean samples sequenced with the same enrichment kit with approximately the same depth (ie 1x WGS and 30x WGS better be analysed in separate runs of ClinCNV). Of course it is better if your samples were sequenced within the same sequencing facility.

Address of the bookmark: https://github.com/imgag/ClinCNV

J. Aires de Sousa Research Group

Wed, 12 Mar 2014 09:57:25 -0500

We are involved in the development of methods and software in chemoinformatics. Current main projects are:

1.automatic learning of chemical reactivity and metabolism,
2.simulation of NMR spectra,
3.modelling of properties of ionic liquids, and
4.representation of molecular chirality.

More at http://joao.airesdesousa.com/

LoFreq*: A sequence-quality aware, ultra-sensitive variant caller for NGS data

BioStar — Tue, 18 Feb 2020 03:24:22 -0600

LoFreq* (i.e. LoFreq version 2) is a fast and sensitive variant-caller for inferring SNVs and indels from next-generation sequencing data. It makes full use of base-call qualities and other sources of errors inherent in sequencing (e.g. mapping or base/indel alignment uncertainty), which are usually ignored by other methods or only used for filtering.

https://github.com/CSB5/lofreq

http://csb5.github.io/lofreq/installation/

https://github.com/CSB5/lofreq/tree/master/dist

Address of the bookmark: http://csb5.github.io/lofreq/

Linux SSH Client Commands for Bioinformatics

Rahul Nayak — Thu, 13 Mar 2014 17:16:32 -0500

Here come on let play with the following basic command line usage of the ssh client.

1. Check your SSH Client Version:

Checking for your SSH client is very sare, but sometimes it may be necessary to identify the SSH client that you are currently running and it’s corresponding version number. The SSh client can be identified as follows

$ ssh -V
OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2013

$ ssh -V
ssh: SSH Secure Shell 3.2.9.1 (non-commercial version) on i686-pc-linux-gnu

2. Connect and login to remote host:

The First time when you login to the remotehost from a localhost, it will display the host key not found message and you can give “yes” to continue. The host key of the remote host will be added under .ssh2/hostkeys directory of your home directory, as shown below.

localhost$ ssh -l jit remotehost.example.com

jit@remotehost.example.com password:

remotehost.example.com$

The Second time when you login to the remote host from the localhost, it will prompt only for the password as the remote host key is already added to the known hosts list of the ssh client.

localhost$ ssh -l jit remotehost.example.com
jit@remotehost.example.com password:
remotehost.example.com$

For some reason, if the host key of the remote host is changed after you logged in for the first time, you may get a warning message as shown below. This could be because of various reasons such as 1) Sysadmin upgraded/reinstalled the SSH server on the remote host 2) someone is doing malicious activity etc., The best possible action to take before saying “yes” to the message below, is to call your sysadmin and identify why you got the host key changed message and verify whether it is the correct host key or not.

localhost$ ssh -l jit remotehost.example.com

jit @remotehost.example.com's password:
remotehost$

4. Debug SSH Client:

Sometimes it is necessary to view debug messages to troubleshoot any SSH connection issues. For this purpose, pass -v (lowercase v) option to the ssh as shown below.

Example without debug message:

        localhost$ ssh -l jit remotehost.example.com
        warning: Connecting to remotehost.example.com failed: No address associated to the name
        localhost$

Example with debug message:

        locaclhost$ ssh -v -l jit remotehost.example.com
        debug: SshConfig/sshconfig.c:2838/ssh2_parse_config_ext: Metaconfig parsing stopped at line 3.
        debug: SshConfig/sshconfig.c:637/ssh_config_set_param_verbose: Setting variable 'VerboseMode' to 'FALSE'.
        debug: SshConfig/sshconfig.c:3130/ssh_config_read_file_ext: Read 17 params from config file.
        debug: Ssh2/ssh2.c:1707/main: User config file not found, using defaults. (Looked for '/home/jit/.ssh2/ssh2_config')
        debug: Connecting to remotehost.example.com, port 22... (SOCKS not used)
        warning: Connecting to remotehost.example.com failed: No address associated to

5. Escape Character: (Toggle SSH session, SSH session statistics etc.)

Escape character ~ get’s SSH clients attention and the character following the ~ determines the escape command.
Toggle SSH Session: When you’ve logged on to the remotehost using ssh from the localhost, you may want to come back to the localhost to perform some activity and go back to remote host again. In this case, you don’t need to disconnect the ssh session to the remote host. Instead follow the steps below.

i. Login to remotehost from localhost: localhost$ssh -l jit remotehost
ii. Now you are connected to the remotehost: remotehost$
iii. To come back to the localhost temporarily, type the escape character ~ and Control-Z. When you type ~ you will not see that immediately on the screen until you press and press enter. So, on the remotehost in a new line enter the following key strokes for the below to work: ~

    remotehost$ ~^Z
    [1]+ Stopped                 ssh -l jit remotehost
    localhost$

iv. Now you are back to the localhost and the ssh remotehost client session runs as a typical unix background job, which you can check as shown below:

    localhost$ jobs
    [1]+ Stopped                 ssh -l jit remotehost

v. You can go back to the remote host ssh without entering the password again by bringing the background ssh remotehost session job to foreground on the localhost

    localhost$ fg %1
    ssh -l jit remotehost
    remotehost$

FiNGS: Filters for Next Generation Sequencing

Neel — Sat, 27 Feb 2021 01:18:35 -0600

Key features

Filters SNVs from any variant caller to remove false positives
Calculates metrics based on BAM files and provides filtering not possible with other tools
Fully user-configurable filtering (including which filters to use and their thresholds)
Option to use filters identical to ICGC recommendations

FiNGS provides researchers with a tool to reproducibly filter somatic variants that is simple to both deploy and use, with filters and thresholds that are fully configurable by the user. It ingests and emits standard variant call format (VCF) files and will slot into existing sequencing pipelines. It allows users to develop and implement their own filtering strategies and simple sharing of these with others.

FiNGS reliably improves upon the precision of default variant caller outputs and performs better than other tools designed for the same task.

Address of the bookmark: https://github.com/cpwardell/FiNGS