BOL: Related items

TGNet

Shruti Paniwala — Wed, 24 Aug 2016 05:36:36 -0500

Recent technological progress has greatly facilitated de novo genome sequencing. However, de novo assemblies consist in many pieces of contiguous sequence (contigs) arranged in thousands of scaffolds instead of small numbers of chromosomes. Confirming and improving the quality of such assemblies is critical for subsequent analysis.

Visualization and quality assessment of de novo genome assemblies

Citation

This software is fully described in the paper:
Riba-Grognuz, Keller, Falquet, Xenarios & Wurm (2011) Visualization and quality assessment of de novo genome assemblies.

In brief, our scripts create Cytoscape files to visualize transcript evidence that suggests adjacency between scaffolds and contigs.

Software requirements

BLAT (tested with Standalone BLAT v. 32×1). Source Binaries .
Cytoscape (tested with versions 2.7.0, 2.8.2)
a UNIX machine (tested on Mac OS X 10.6 and CentOS 4.6)

Address of the bookmark: https://github.com/ksanao/TGNet

Software for genome assembly !

LEGE — Sun, 30 Aug 2020 09:51:38 -0500

List of bioinformatics tools/Software Website References for genome assembly:

1 Falcon https://github.com/PacificBiosciences/pb-assembly

2 Canu assembler http://canu.readthedocs.io/en/latest/index.html

3 Miniasm assembler https://github.com/lh3/miniasm

4 PBJelly scaffolding tool https://sourceforge.net/projects/pb-jelly/

5 ARCS scaffolding tool https://github.com/bcgsc/arcs

6 Redundans reduction and scaffolding tool https://github.com/Gabaldonlab/redundans

7 Arrow error correction https://github.com/PacificBiosciences/ GenomicConsensus

8 PILON error correction https://github.com/broadinstitute/pilon/wiki

9 BUSCO single copy gene markers http://busco.ezlab.org/

10 Bandage graph assembly viewer https://rrwick.github.io/Bandage/

11 Gepard dotter http://cube.univie.ac.at/gepard

12 MUMmer aligner and plotter http://mummer.sourceforge.net/

EXCAVATOR2tool

Bulbul — Wed, 30 Nov 2016 04:09:19 -0600

EXCAVATOR2 is a collection of bash, R and Fortran scripts and codes that analyses Whole Exome Sequencing (WES) data to identify CNVs. EXCAVATOR2 enhances the identification of all genomic CNVs, both overlapping and non-overlapping targeted exons by integrating the analysis of In-targets and Off- targets reads. Specifically, it improves the precision of calling CNVs overlapping targeted exons from WES data and enlarges the spectrum of detectable CNVs to off-target events.
EXCAVATOR2 can be effectively employed for the identification of CNVs in small as well as large-scale re-sequencing population and cancer studies. Lastly, it’s of particular interest that all WES experiments can be re-analysed using our method with the beneficial effect to identify novelCNVs in extra-exonic regions by having the full-genome CN profile.

Address of the bookmark: https://sourceforge.net/projects/excavator2tool/

MAKER

Jitendra Narayan — Sun, 07 Feb 2016 15:59:24 -0600

MAKER is a portable and easily configurable genome annotation pipeline.Its purpose is to allow smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. MAKER identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values.

More at http://www.yandell-lab.org/software/maker.html

Address of the bookmark: http://www.yandell-lab.org/software/maker.html

CrossMap

Jitendra Narayan — Mon, 08 Feb 2016 15:47:00 -0600

CrossMap is a program for convenient conversion of genome coordinates (or annotation files) between different assemblies (such as Human hg18 (NCBI36) <> hg19 (GRCh37), Mouse mm9 (MGSCv37) <> mm10 (GRCm38)).

It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF.

CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome.

We do not recommend using CrossMap to convert genome coordinates between species.

More at http://crossmap.sourceforge.net/

Address of the bookmark: http://crossmap.sourceforge.net/

Understanding Fastqc Output

Jit — Fri, 15 Apr 2016 05:47:40 -0500

Understanding Following table and graphs

Duplication level
kmer profile
per base GC content
per base N content
per base quality
per base sequence content
per sequence GC content
per sequence quality
sequence length distribution

More at http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

HGA

Jit — Tue, 29 Nov 2016 07:25:53 -0600

HGA tool version 1.0 This tool helps to apply the Hierarchical Genome Assembly (HGA) method. The tool will apply: 1. Partitioning a given reads dataset into a given number of partitions. 2. Assembling each partitions using a pre-specified assembler (Velvet or SPAdes in this version) and using a given kmer size. 3. Merging all the assemblies of the partition. 4. Combining all the assemblies of the partition (using velvet with kmer value of 31). 5. Finaly, re-assembling the whole dataset with the merged contigs or the combined contigs, using a given kmer size.

https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Address of the bookmark: https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

ScaffMatch

Jit — Tue, 13 Dec 2016 10:23:56 -0600

caffMatch is a novel scaffolding tool based on Maximum-Weight Matching able to produce high-quality scaffolds from NGS data (reads and contigs). The tool is written in Python 2.7. It also includes a bash script wrapper that calls aligner in case one needs to first map reads to contigs (instead of providing .sam files).

The arguments accepted by ScaffMatch are:

-w) Working directory -- this is the directory where ScaffMatch files are stored. These are .sam files produced after mapping reads to contigs and the resulting scaffolds file `scaffolds.fa` fasta file;

-c) Contig fasta file;

-m) Command line argument with no options. It is used when .sam files are used instead of reads .fastq files. Do not use this option if you provide reads files;

-1) (Comma separated list of) either .fastq or .sam file(s) corresponding to the first read of the read pair;

-2) (Comma separated list of) either .fastq or .sam file(s) corresponding to the second read of the read pair;

-i) (Comma separated list of) insert size(s) of the library(-ies);

-s) (Comma separated list of) library(-ies) standard deviation(s) of insert size(s);

-t) Bundle threshold. Pairs of contigs supported by number of read pairs less than the value of this argument are discarded. Optional argument, by default it is equal to 5;

-g) Matching heuristics: use `max_weight` for Maximum Weight Matching heuristics with the Insertion step, use `backbone` for Maximum Weight Matching heuristics without the Insertion step, use `greedy` for Greedy Matching heuristics;

-l) Log file - where to store the logs. Optional argument. By default, stdout is used.

Address of the bookmark: http://alan.cs.gsu.edu/NGS/?q=content/scaffmatch

RASTtk : algorithm for building custom annotation pipelines and annotating batches of genomes

Abhi — Wed, 27 Apr 2016 11:07:59 -0500

The RAST (Rapid Annotation using Subsystem Technology) annotation engine was built in 2008 to annotate bacterial and archaeal genomes. It works by offering a standard software pipeline for identifying genomic features (i.e., protein-encoding genes and RNA) and annotating their functions. Recently, in order to make RAST a more useful research tool and to keep pace with advancements in bioinformatics, it has become desirable to build a version of RAST that is both customizable and extensible. In this paper, we describe the RAST tool kit (RASTtk), a modular version of RAST that enables researchers to build custom annotation pipelines. RASTtk offers a choice of software for identifying and annotating genomic features as well as the ability to add custom features to an annotation job. RASTtk also accommodates the batch submission of genomes and the ability to customize annotation protocols for batch submissions. This is the first major software restructuring of RAST since its inception.

More at http://www.nature.com/articles/srep08365

Address of the bookmark: http://rast.nmpdr.org/