BOL: Related items

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

FastGT: an alignment-free method for calling common SNVs directly from raw sequencing reads

Jit — Tue, 28 Jan 2020 03:27:33 -0600

FastGT is a program package for whole-genome genotyping of genome variants directly from raw sequencing reads. It is written in C and runs in Linux. FastGT uses a list of variant-specific k-mer pairs that are unique in human genome, counts the frequency of k-mers in sequencing data and predicts the genotype. All this takes less than 1 hour on average low-cost Linux server.

http://bioinfo.ut.ee/FastGT/

https://github.com/bioinfo-ut/GenomeTester4/

Address of the bookmark: http://bioinfo.ut.ee/FastGT/

Filtlong: quality filtering tool for long reads

Radha Agarkar — Wed, 13 May 2020 10:23:55 -0500

Filtlong is a tool for filtering long reads by quality. It can take a set of long reads and produce a smaller, better subset. It uses both read length (longer is better) and read identity (higher is better) when choosing which reads pass the filter.

Filtlong builds into a stand-alone executable:

git clone https://github.com/rrwick/Filtlong.git
cd Filtlong
make -j
bin/filtlong -h

Address of the bookmark: https://github.com/rrwick/Filtlong

SPAdes

Abhimanyu Singh — Tue, 19 Apr 2016 08:37:08 -0500

SPAdes – St. Petersburg genome assembler – is intended for both standard isolates and single-cell MDA bacteria assemblies. This manual will help you to install and run SPAdes. SPAdes version 3.7.1 was released under GPLv2 on March 8, 2016 and can be downloaded from http://bioinf.spbau.ru/en/spades.

Manual at http://spades.bioinf.spbau.ru/release3.7.1/manual.html

Address of the bookmark: http://bioinf.spbau.ru/spades

mrFAST: Micro Read Fast Alignment Search Tool

Neel — Tue, 26 Apr 2016 03:50:06 -0500

mrFAST is a read mapper that is designed to map short reads to reference genome with a special emphasis on the discovery of structural variation and segmental duplications. mrFAST maps short reads with respect to user defined error threshold, including indels up to 4+4 bp. This manual, describes how to choose the parameters and tune mrFAST with respect to the library settings. mrFAST is designed to find 'all' mappings for a given set of reads, however it can return one "best" map location if the relevant parameter is invoked.

More at http://mrfast.sourceforge.net/manual.html

Address of the bookmark: http://mrfast.sourceforge.net/manual.html

segemehl

Anjana — Tue, 10 May 2016 08:10:15 -0500

segemehl is a software to map short sequencer reads to reference genomes. Unlike other methods, segemehl is able to detect not only mismatches but also insertions and deletions. Furthermore, segemehl is not limited to a specific read length and is able to map primer- or polyadenylation contaminated reads correctly. segemehl implements a matching strategy based on enhanced suffix arrays (ESA).

More at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Manual http://www.bioinf.uni-leipzig.de/Software/segemehl/segemehl_manual_0_1_7.pdf

Address of the bookmark: http://hoffmann.bioinf.uni-leipzig.de/LIFE/segemehl.html

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

WgSim

Jit — Thu, 23 Jun 2016 07:26:49 -0500

Reads simulator

Wgsim is a small tool for simulating sequence reads from a reference genome. It is able to simulate diploid genomes with SNPs and insertion/deletion (INDEL) polymorphisms, and simulate reads with uniform substitution sequencing errors. It does not generate INDEL sequencing errors, but this can be partly compensated by simulating INDEL polymorphisms.

Wgsim outputs the simulated polymorphisms, and writes the true read coordinates as well as the number of polymorphisms and sequencing errors in read names. One can evaluate the accuracy of a mapper or a SNP caller with wgsim_eval.pl that comes with the package.

Address of the bookmark: https://github.com/lh3/wgsim