BOL: Related items

segemehl

Anjana — Tue, 10 May 2016 08:10:15 -0500

segemehl is a software to map short sequencer reads to reference genomes. Unlike other methods, segemehl is able to detect not only mismatches but also insertions and deletions. Furthermore, segemehl is not limited to a specific read length and is able to map primer- or polyadenylation contaminated reads correctly. segemehl implements a matching strategy based on enhanced suffix arrays (ESA).

More at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Manual http://www.bioinf.uni-leipzig.de/Software/segemehl/segemehl_manual_0_1_7.pdf

Address of the bookmark: http://hoffmann.bioinf.uni-leipzig.de/LIFE/segemehl.html

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

WgSim

Jit — Thu, 23 Jun 2016 07:26:49 -0500

Reads simulator

Wgsim is a small tool for simulating sequence reads from a reference genome. It is able to simulate diploid genomes with SNPs and insertion/deletion (INDEL) polymorphisms, and simulate reads with uniform substitution sequencing errors. It does not generate INDEL sequencing errors, but this can be partly compensated by simulating INDEL polymorphisms.

Wgsim outputs the simulated polymorphisms, and writes the true read coordinates as well as the number of polymorphisms and sequencing errors in read names. One can evaluate the accuracy of a mapper or a SNP caller with wgsim_eval.pl that comes with the package.

Address of the bookmark: https://github.com/lh3/wgsim

Prodigal (Prokaryotic Dynamic Programming Genefinding Algorithm)

Abhimanyu Singh — Thu, 29 Dec 2016 03:26:45 -0600

Prodigal (Prokaryotic Dynamic Programming Genefinding Algorithm) is a microbial (bacterial and archaeal) gene finding program developed at Oak Ridge National Laboratory and the University of Tennessee. Key features of Prodigal include:

Speed: Prodigal is an extremely fast gene recognition tool (written in very vanilla C). It can analyze an entire microbial genome in 30 seconds or less.
Accuracy: Prodigal is a highly accurate gene finder. It correctly locates the 3' end of every gene in the experimentally verified Ecogene data set (except those containing introns). It possesses a very sophisticated ribosomal binding site scoring system that enables it to locate the translation initiation site with great accuracy (96% of the 5' ends in the Ecogene data set are located correctly).
Specificity: Prodigal's false positive rate compares favorably with other gene identification programs, and usually falls under 5%.
GC-Content Indifferent: Prodigal performs well even in high GC genomes, with over a 90% perfect match (5'+3') to the Pseudomonas aeruginosa curated annotations.
Metagenomic Version: Prodigal can run in metagenomic mode and analyze sequences even when the organism is unknown.
Ease of Use: Prodigal can be run in one step on a single genomic sequence or on a draft genome containing many sequences. It does not need to be supplied with any knowledge of the organism, as it learns all the properties it needs to on its own.
Open Source: Prodigal source code is freely available under the General Public License.

Download the latest version of Prodigal at the Prodigal github page.
or
Browse the wiki documenation.

Address of the bookmark: http://prodigal.ornl.gov/

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

HivePlot

Jit — Thu, 16 Feb 2017 11:39:34 -0600

The hive plot is a rational visualization method for drawing networks. Nodes are mapped to and positioned on radially distributed linear axes — this mapping is based on network structural properties. Edges are drawn as curved links. Simple and interpretable.

The purpose of the hive plot is to establish a new baseline for visualization of large networks — a method that is both general and tunable and useful as a starting point in visually exploring network structure.

More at http://www.hiveplot.com/

Address of the bookmark: http://www.hiveplot.com/

splitbam: splits a BAM by chromosomes

Jit — Tue, 28 Feb 2017 09:01:28 -0600

splitbam splits a BAM by chromosomes.

Using the reference sequence dictionary (*.dict), it also creates some empty BAM files if no sam record was found for a chromosome. A pair of 'mock' SAM-Records can also be added to those empty BAMs to avoid some tools (like samtools) to crash.

Usage

java -jar splitbam.jar -p OUT/__CHROM__/__CHROM__.bam -R ref.fasta (bam|sam|stdin)

Options

-h help; This screen.
-R (indexed reference file) REQUIRED.
-u (unmapped chromosome name): default:Unmapped
-e | --empty : generate EMPTY bams for chromosome having no read mapped
-m | --mock : if option '-e', add a mock pair of sam records to the empty bam
-p (output file/bam pattern) REQUIRED. MUST contain __CHROM__ and end with .bam
-s assume input is sorted.
-x | --index create index.
-t | --tmp (dir) tmp file directory
-G (file) chrom-group file (see below)

Address of the bookmark: https://code.google.com/archive/p/jvarkit/wikis/SplitBam.wiki

Krona

Jit — Wed, 22 Mar 2017 04:47:35 -0500

Krona allows hierarchical data to be explored with zooming, multi-layered pie charts. Krona charts can be created using an Excel template or KronaTools, which includes support for several bioinformatics tools and raw data formats. The interactive charts are self-contained and can be viewed with any modern web browser (see Browser support).

Address of the bookmark: https://github.com/marbl/Krona/wiki