BOL: Related items

SCALCE

Surabhi Chaudhary — Fri, 15 Apr 2016 05:09:51 -0500

SCALCE (/skeɪlz/, a.k.a. boosting Sequence Compression Algorithms using Locally ConsistentEncoding) is a tool for compressing FASTQ files. It is designed specifically for the Illumina-generated FASTQ files, but supports any valid FASTQ with consistent read lengths.

More at http://sfu-compbio.github.io/scalce/

Address of the bookmark: http://sfu-compbio.github.io/scalce/

SPAdes

Abhimanyu Singh — Tue, 19 Apr 2016 08:37:08 -0500

SPAdes – St. Petersburg genome assembler – is intended for both standard isolates and single-cell MDA bacteria assemblies. This manual will help you to install and run SPAdes. SPAdes version 3.7.1 was released under GPLv2 on March 8, 2016 and can be downloaded from http://bioinf.spbau.ru/en/spades.

Manual at http://spades.bioinf.spbau.ru/release3.7.1/manual.html

Address of the bookmark: http://bioinf.spbau.ru/spades

BUSCO: Assessing genome assembly and annotation completeness with Benchmarking Universal Single-Copy Orthologs

Anjana — Tue, 10 May 2016 07:46:24 -0500

High-throughput genomics has revolutionized biological research, however, while the number of sequenced genomes grows by the day, quality assessment of the resulting assembled sequences remains complicated and mostly limited to technical measures like N50.
BUSCO provides measures for quantitative assessment of genome assembly, gene set, and transcriptome completeness based on evolutionarily informed expectations of gene content from near-universal single-copy orthologs selected from OrthoDB.
BUSCO assessments are implemented in open-source software, with comprehensive lineage-specific sets of Benchmarking Universal Single-Copy Orthologs for arthropods, vertebrates, metazoans, fungi, eukaryotes, and bacteria.
These conserved orthologs are ideal candidates for large-scale phylogenomics studies, and the annotated BUSCO gene models built during genome assessments provide a comprehensive gene predictor training set for use as part of genome annotation pipelines.
BUSCO assessments offer intuitive metrics, based on evolutionarily informed expectations of gene content from hundreds of species, to gauge completeness of rapidly accumulating genomic data and satisfy an Iberian's quest for quality - "Busco calidad/qualidade".

Address of the bookmark: http://busco.ezlab.org/

mrFAST: Micro Read Fast Alignment Search Tool

Neel — Tue, 26 Apr 2016 03:50:06 -0500

mrFAST is a read mapper that is designed to map short reads to reference genome with a special emphasis on the discovery of structural variation and segmental duplications. mrFAST maps short reads with respect to user defined error threshold, including indels up to 4+4 bp. This manual, describes how to choose the parameters and tune mrFAST with respect to the library settings. mrFAST is designed to find 'all' mappings for a given set of reads, however it can return one "best" map location if the relevant parameter is invoked.

More at http://mrfast.sourceforge.net/manual.html

Address of the bookmark: http://mrfast.sourceforge.net/manual.html

segemehl

Anjana — Tue, 10 May 2016 08:10:15 -0500

segemehl is a software to map short sequencer reads to reference genomes. Unlike other methods, segemehl is able to detect not only mismatches but also insertions and deletions. Furthermore, segemehl is not limited to a specific read length and is able to map primer- or polyadenylation contaminated reads correctly. segemehl implements a matching strategy based on enhanced suffix arrays (ESA).

More at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Manual http://www.bioinf.uni-leipzig.de/Software/segemehl/segemehl_manual_0_1_7.pdf

Address of the bookmark: http://hoffmann.bioinf.uni-leipzig.de/LIFE/segemehl.html

AccNET

Jitendra Narayan — Fri, 07 Oct 2016 05:22:11 -0500

AccNET is a Perl application that presents a new way to study the accessory genome of a given set of organisms. Using the proteomes of these organisms, AccNET create a bipartite network compatible with common network analysis platforms. AccNET collects phylogenetic and functional information in a network improving the analysis capability. Networks offer a new perspective of organism organization through elements acquired by horizontal gene transfers and not constricted by hierarchical structures.

More at https://www.youtube.com/watch?v=vdGuy1GAJrQ

Address of the bookmark: https://sourceforge.net/projects/accnet/

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

Blobsplorer

Jit — Tue, 14 Jun 2016 10:28:58 -0500

Blobsplorer is a tool for interactive visualization of assembled DNA sequence data ("contigs") derived from (often unintentionally) mixed-species pools. It allows the simultaneous display of GC content, coverage, and taxonomic annotation for collections of contigs with a view to separating out those belonging to different taxa.

Blobsplorer is unlikely to be of use on its own as it requires contig data to be supplied in a format that involves considerable preprocessing (see below for a description). The easiest way to use Blobsplorer is as part of a workflow using scripts from here.

Address of the bookmark: http://nematodes.org/martin/blobsplorer/blobsplorer.html