BOL: Related items

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

CNIDARIA: fast, reference-free phylogenomic clustering

Shruti Paniwala — Thu, 16 Jun 2016 17:55:17 -0500

Motivation: Identification of biological specimens is a major requirement for a range of applications. Reference-free methods analyse unprocessed sequencing data without relying on prior knowledge, but these do not scale to arbitrarily large genomes and arbitrarily large phylogenetic distances.

Results: We present Cnidaria, a practical tool for clustering genomic and transcriptomic data with no limitation on ge-nome size or phylogenetic distances. We successfully simultaneously clustered 169 genomic and transcriptomic datasets from 4 kingdoms, achieving 100% accuracy at supra-species level and 78% accuracy for species level.

Availability and Implementation: Cnidaria is written in C++ and Python and is available at http://www.ab.wur.nl/cnidaria.

Contact: Saulo Aflitos - sauloal@gmail.com

Supplementary information: Supplementary data are available at Bioinformatics online.

Address of the bookmark: https://github.com/sauloal/cnidaria/wiki

Samtools Primer !!

Jit — Thu, 23 Jun 2016 07:18:17 -0500

SAMtools: Primer / Tutorial by Ethan Cerami, Ph.D.

keywords: samtools, next-gen, next-generation, sequencing, bowtie, sam, bam, primer, tutorial, how-to, introduction
Revisions

    1.0: May 30, 2013: First public release on biobits.org.
    1.1: July 24, 2013: Updated with Disqus Comments / Feedback section.
    1.2: December 19, 2014: Multiple updates, including:
        Updated to use samtools 1.1 and bcftools 1.2.
        Updated usage for bcftools.

About

SAMtools is a popular open-source tool used in next-generation sequence analysis. This primer provides an introduction to SAMtools, and is geared towards those new to next-generation sequence analysis. The primer is also designed to be self-contained and hands-on, meaning that you only need to install SAMtools, and no other tools, and sample data sets are provided. Terms in bold are also explained in the glossary at the end of the document.

Address of the bookmark: http://biobits.org/samtools_primer.html

QuIN’s web server

Jit — Mon, 27 Jun 2016 10:44:16 -0500

Recent studies of the human genome have indicated that regulatory elements (e.g. promoters and enhancers) at distal genomic locations can interact with each other via chromatin folding and affect gene expression levels. Genomic technologies for mapping interactions between DNA regions, e.g., ChIA-PET and HiC, can generate genome-wide maps of interactions between regulatory elements. These interaction datasets are important resources to infer distal gene targets of non-coding regulatory elements and to facilitate prioritization of critical loci for important cellular functions. With the increasing diversity and complexity of genomic information and public ontologies, making sense of these datasets demands integrative and easy-to-use software tools. Moreover, network representation of chromatin interaction maps enables effective data visualization, integration, and mining. Currently, there is no software that can take full advantage of network theory approaches for the analysis of chromatin interaction datasets. To fill this gap, we developed a web-based application, QuIN, which enables: 1) building and visualizing chromatin interaction networks, 2) annotating networks with user-provided private and publicly available functional genomics and interaction datasets, 3) querying network components based on gene name or chromosome location, and 4) utilizing network based measures to identify and prioritize critical regulatory targets and their direct and indirect interactions.

AVAILABILITY: QuIN’s web server is available at http://quin.jax.org QuIN is developed in Java and JavaScript, utilizing an Apache Tomcat web server and MySQL database and the source code is available under the GPLV3 license available on GitHub:https://github.com/UcarLab/QuIN/.

Address of the bookmark: http://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1004809

Bioinformatics tools and software

Jit — Tue, 05 Jul 2016 10:02:26 -0500

USEARCH >
Extreme high-throughput sequence analysis. Orders of magnitude faster than BLAST. MUSCLE >
Multiple sequence alignment. Faster and more accurate than CLUSTALW.

UPARSE >
OTU clustering for 16S and other marker genes. Highly accurate OTU sequences and improved diversity measures. UCHIME >
Chimeric sequence detection. PILER >
De novo genome repeat finder. PILER-CR >
Detection of CRISPR repeats in bacterial genomes. QSCORE >
Compare two multiple alignments for benchmarking. PALS >
Whole-genome alignment. PREFAB >
Protein Reference Alignment Database. MSA benchmark collection >
Selected multiple alignment benchmarks in a standardized FASTA format.

Address of the bookmark: http://drive5.com/software.html

vcfR

Archana Malhotra — Fri, 19 Aug 2016 07:38:24 -0500

Most variant calling pipelines result in files containing large quantities of variant information. The variant call format (vcf) is an increasingly popular format for this data. The format of these files and their content is discussed in the vignette ‘vcf data.’ These files are typically intended to be post-processed (i.e., filtered) as an attempt to remove false positives or otherwise problematic sites. The R package vcfR provides tools to facilitate this filtering as well as to visualize the effects of choices made during this process.

Address of the bookmark: https://cran.r-project.org/web/packages/vcfR/vignettes/visualization_1.html

Useful Bioinformatics Tools

Poonam Mahapatra — Mon, 29 Aug 2016 04:08:12 -0500

Collections of few handy tools for bioinformatician

http://molbiol-tools.ca/Convert.htm

Address of the bookmark: http://molbiol-tools.ca/Convert.htm

Artemis Comparison Tool (ACT)

Shruti Paniwala — Wed, 07 Sep 2016 03:54:41 -0500

ACT is a Java application for displaying pairwise comparisons between two or more DNA sequences. It can be used to identify and analyse regions of similarity and difference between genomes and to explore conservation of synteny, in the context of the entire sequences and their annotation. It can read complete EMBL, GENBANK and GFF entries or sequences in FASTA or raw format.

Address of the bookmark: http://www.sanger.ac.uk/science/tools/artemis-comparison-tool-act

CIRCOS Visualize !!

Jit — Fri, 02 Sep 2016 08:29:26 -0500

Before uploading a data file, check the samples gallery to make sure that your data format is compatible.

Your file must be plain text.
Your data values must be non-negative integers.
Data must be space-separated (one or more tab or space, which will be collapsed).
No two rows or columns may have the same name.
Column and row names must begin with a letter (e.g. 'A', 'A0', 'A-0') and can only contain letters, numbers and _. No punctuation!
Maximum row + column total is 150 — if exceeded, rows and columns are limited to 75.
If you are using order, size and color rows/columns in combination they must appear in that order.

Need help? Post questions to the Circos Google Group.

http://mkweb.bcgsc.ca/tableviewer/visualize/

Address of the bookmark: http://mkweb.bcgsc.ca/tableviewer/visualize/