BOL: Related items

Platanus

Jit — Fri, 13 May 2016 05:12:40 -0500

Platanus is a novel de novo sequence assembler that can reconstruct genomic sequences of
highly heterozygous diploids from massively parallel shotgun sequencing data.

The latest version is 1.2.4.

To cite Platanus, please use the following:

Kajitani R, Toshimoto K, Noguchi H, Toyoda A, Ogura Y, Okuno M, Yabana M, Harada M, Nagayasu E, Maruyama H, Kohara Y, Fujiyama A, Hayashi T, Itoh T, “Efficient de novo assembly of highly heterozygous genomes from whole-genome shotgun short reads”. Genome Res. 2014 Aug;24(8):1384-95. doi: 10.1101/gr.170720.113. [abstract | full text]

Address of the bookmark: http://platanus.bio.titech.ac.jp/

MOSAIK: A Hash-Based Algorithm for Accurate Next-Generation Sequencing Short-Read Mapping

Neel — Fri, 20 May 2016 18:53:49 -0500

MOSAIK is a stable, sensitive and open-source program for mapping second and third-generation sequencing reads to a reference genome. Uniquely among current mapping tools, MOSAIK can align reads generated by all the major sequencing technologies, including Illumina, Applied Biosystems SOLiD, Roche 454, Ion Torrent and Pacific BioSciences SMRT. Indeed, MOSAIK was the only aligner to provide consistent mappings for all the generated data (sequencing technologies, low-coverage and exome) in the 1000 Genomes Project. To provide highly accurate alignments, MOSAIK employs a hash clustering strategy coupled with the Smith-Waterman algorithm. This method is well-suited to capture mismatches as well as short insertions and deletions. To support the growing interest in larger structural variant (SV) discovery, MOSAIK provides explicit support for handling known-sequence SVs, e.g. mobile element insertions (MEIs) as well as generating outputs tailored to aid in SV discovery.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0090581

Blobology

Jit — Mon, 13 Jun 2016 10:18:33 -0500

Tools for making blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step

Blaxter Lab, Institute of Evolutionary Biology, University of Edinburgh

Goal: To create blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step.

This repository accompanies the paper:
Blobology: exploring raw genome data for contaminants, symbionts and parasites using taxon-annotated GC-coverage plots. Sujai Kumar, Martin Jones, Georgios Koutsovoulos, Michael Clarke, Mark Blaxter
(submitted 2013-10-01 to Frontiers in Bioinformatics and Computational Biology special issue : Quality assessment and control of high-throughput sequencing data).

It contains bash/perl/R scripts for running the analysis presented in the paper to create a preliminary assembly, and to create and collate GC content, read coverage and taxon annotation for the preliminary assembly, which can be visualised, such as Figure 2a from the paper showing TAGC plots/blobplots for Caenorhabditis sp. 5:

Address of the bookmark: https://github.com/blaxterlab/blobology

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

A5-miseq

Jit — Thu, 18 Aug 2016 04:05:23 -0500

_A5-miseq_ is a pipeline for assembling DNA sequence data generated on the Illumina sequencing platform. This README will take you through the steps necessary for running _A5-miseq_.

Point to note:

There are many situations where A5-miseq is not the right tool for the job. In order to produce accurate results, A5-miseq requires Illumina data with certain characteristics. A5-miseq will likely not work well with Illumina reads shorter than around 80nt, or reads where the base qualities are low in all or most reads before 60nt. A5-miseq assumes it is assembling homozygous haploid genomes. Use a different assembler for metagenomes and heterozygous diploid or polyploid organisms. Use a different assembler if a tool like FastQC reports your data quality is dubious. You have been warned! Datasets consisting solely of unpaired reads are not currently supported.

Address of the bookmark: https://sourceforge.net/projects/ngopt/

Kaiju

Jit — Mon, 27 Jun 2016 11:23:04 -0500

Kaiju is a program for the taxonomic classification of metagenomic high-throughput sequencing reads. Each read is directly assigned to a taxon within the NCBI taxonomy by comparing it to a reference database containing microbial and viral protein sequences.

By default, Kaiju uses either the available complete genomes from NCBI RefSeq or the microbial subset of the non-redundant protein database nr used by NCBI BLAST, optionally also including fungi and microbial eukaryotes.

Kaiju translates reads into amino acid sequences, which are then searched in the database using a modified backward search on a memory-efficient implementation of the Burrows-Wheeler transform, which finds maximum exact matches (MEMs), optionally allowing mismatches in the protein alignment. The search can process up to millions of reads per minute using, for example, only 10 GB RAM with a protein database comprising 4821 microbial genomes. Kaiju can also be used for querying any other protein database without taxonomic classification, using either protein or nucleotide queries.

Kaiju is described in Menzel, P. et al. (2016) Fast and sensitive taxonomic classification for metagenomics with Kaiju. Nat. Commun. 7:11257 (open access).

Address of the bookmark: http://kaiju.binf.ku.dk/

Scarpa

Poonam Mahapatra — Wed, 13 Jul 2016 07:59:25 -0500

Scarpa is a stand-alone scaffolding tool for NGS data. It can be used together with virtually any genome assembler and any NGS read mapper that supports SAM format. Other features include support for multiple libraries and an option to estimate insert size distributions from data. Scarpa is available free of charge for academic and commercial use under the GNU General Public License (GPL).

See the user manual or the paper for more information about Scarpa. Click here for the supplementary material.

Address of the bookmark: http://compbio.cs.toronto.edu/hapsembler/scarpa.html

Genome STRiP

Neel — Tue, 06 Sep 2016 03:58:19 -0500

Genome STRiP (Genome STRucture In Populations) is a suite of tools for discovering and genotyping structural variations using sequencing data. The methods are designed to detect shared variation using data from multiple individuals.

Genome STRiP looks both across and within a set of sequenced genomes to detect variation. The methods are adaptive and support heterogeneous data sets, including variations in sequencing depth, read lengths and mixtures of paired and single-end reads. A minimum of 20 to 30 genomes are required to get acceptable results, but the method gains power across genomes and processing more genomes provide better results.

To run discovery or genotyping on a single sequenced genome or a small set of genomes, you need to call your data against a background population, such as a set of genomes from the 1000 Genomes Project. The background population does not need to be matched to the target individuals.

Address of the bookmark: http://software.broadinstitute.org/software/genomestrip/

CrossMap

Abhimanyu Singh — Mon, 05 Sep 2016 04:07:38 -0500

CrossMap is a program for convenient conversion of genome coordinates (or annotation files) between different assemblies (such as Human hg18 (NCBI36) <> hg19 (GRCh37), Mouse mm9 (MGSCv37) <> mm10 (GRCm38)).
It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF.
CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome.
We do not recommend using CrossMap to convert genome coordinates between species.

Address of the bookmark: http://crossmap.sourceforge.net/

OrganellarGenomeDRAW

Jit — Tue, 16 Aug 2016 08:13:13 -0500

OrganellarGenomeDRAW is dedicated to convert genetic information stored in GenBank entries to graphical maps. The input text file has to be in GenBank flat file format, whereas the output format can be chosen among several formats. The application is especially optimized and adapted for the creation of high-quality, detailed circular maps of organellar genomes like the plastid genome (plastome) or the mitochondrial genome (chondriome). Nevertheless, you can upload any GenBank entry. The workflow is devided into three steps.

More at http://ogdraw.mpimp-golm.mpg.de/cgi-bin/ogdraw.pl

Address of the bookmark: http://ogdraw.mpimp-golm.mpg.de/index.shtml