BOL: Related items

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

MEDEA: Comparative Genomic Visualization with Adobe Flash

Jit — Tue, 26 Apr 2016 12:15:16 -0500

As the number of sequence and annotated genomes grows larger, the need to understand, compare, and contrast the data becomes increasingly important. Using the power of the human visual system to detect trends and spot outliers is necessary in such large and complex data sets.

More at http://www.broadinstitute.org/annotation/medea/

Address of the bookmark: http://www.broadinstitute.org/annotation/medea/

RASTtk : algorithm for building custom annotation pipelines and annotating batches of genomes

Abhi — Wed, 27 Apr 2016 11:07:59 -0500

The RAST (Rapid Annotation using Subsystem Technology) annotation engine was built in 2008 to annotate bacterial and archaeal genomes. It works by offering a standard software pipeline for identifying genomic features (i.e., protein-encoding genes and RNA) and annotating their functions. Recently, in order to make RAST a more useful research tool and to keep pace with advancements in bioinformatics, it has become desirable to build a version of RAST that is both customizable and extensible. In this paper, we describe the RAST tool kit (RASTtk), a modular version of RAST that enables researchers to build custom annotation pipelines. RASTtk offers a choice of software for identifying and annotating genomic features as well as the ability to add custom features to an annotation job. RASTtk also accommodates the batch submission of genomes and the ability to customize annotation protocols for batch submissions. This is the first major software restructuring of RAST since its inception.

More at http://www.nature.com/articles/srep08365

Address of the bookmark: http://rast.nmpdr.org/

MOSAIK: A Hash-Based Algorithm for Accurate Next-Generation Sequencing Short-Read Mapping

Neel — Fri, 20 May 2016 18:53:49 -0500

MOSAIK is a stable, sensitive and open-source program for mapping second and third-generation sequencing reads to a reference genome. Uniquely among current mapping tools, MOSAIK can align reads generated by all the major sequencing technologies, including Illumina, Applied Biosystems SOLiD, Roche 454, Ion Torrent and Pacific BioSciences SMRT. Indeed, MOSAIK was the only aligner to provide consistent mappings for all the generated data (sequencing technologies, low-coverage and exome) in the 1000 Genomes Project. To provide highly accurate alignments, MOSAIK employs a hash clustering strategy coupled with the Smith-Waterman algorithm. This method is well-suited to capture mismatches as well as short insertions and deletions. To support the growing interest in larger structural variant (SV) discovery, MOSAIK provides explicit support for handling known-sequence SVs, e.g. mobile element insertions (MEIs) as well as generating outputs tailored to aid in SV discovery.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0090581

Blobology

Jit — Mon, 13 Jun 2016 10:18:33 -0500

Tools for making blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step

Blaxter Lab, Institute of Evolutionary Biology, University of Edinburgh

Goal: To create blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step.

This repository accompanies the paper:
Blobology: exploring raw genome data for contaminants, symbionts and parasites using taxon-annotated GC-coverage plots. Sujai Kumar, Martin Jones, Georgios Koutsovoulos, Michael Clarke, Mark Blaxter
(submitted 2013-10-01 to Frontiers in Bioinformatics and Computational Biology special issue : Quality assessment and control of high-throughput sequencing data).

It contains bash/perl/R scripts for running the analysis presented in the paper to create a preliminary assembly, and to create and collate GC content, read coverage and taxon annotation for the preliminary assembly, which can be visualised, such as Figure 2a from the paper showing TAGC plots/blobplots for Caenorhabditis sp. 5:

Address of the bookmark: https://github.com/blaxterlab/blobology

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

A5-miseq

Jit — Thu, 18 Aug 2016 04:05:23 -0500

_A5-miseq_ is a pipeline for assembling DNA sequence data generated on the Illumina sequencing platform. This README will take you through the steps necessary for running _A5-miseq_.

Point to note:

There are many situations where A5-miseq is not the right tool for the job. In order to produce accurate results, A5-miseq requires Illumina data with certain characteristics. A5-miseq will likely not work well with Illumina reads shorter than around 80nt, or reads where the base qualities are low in all or most reads before 60nt. A5-miseq assumes it is assembling homozygous haploid genomes. Use a different assembler for metagenomes and heterozygous diploid or polyploid organisms. Use a different assembler if a tool like FastQC reports your data quality is dubious. You have been warned! Datasets consisting solely of unpaired reads are not currently supported.

Address of the bookmark: https://sourceforge.net/projects/ngopt/

WiseScaffolder

Poonam Mahapatra — Wed, 13 Jul 2016 08:08:57 -0500

Function

WiseScaffolder is a stand-alone semi-automatic application for genome scaffolding of pre-assembled contigs using mate-pair data. It also produces editable scaffold maps, allowing either to build gapped scaffolds or usable as a common thread for the manual improvement of scaffolds.

Description

WiseScaffolder includes 4 subcommands: dumpconfig generates a configuration file that notably specifies the average insert size of the mate-pair library preprocess allows the detection and correction of chimerae, the estimation of contigs copy number and produces valuable outputs for the manual improvement of scaffolds scaffold constitutes the central scaffold-builder and comprises two modules:

i) the interative_scaffold_extender, which works with big, unambiguous contigs, or when they run out, single copy contigs, and

ii) the small_contig_inserter, which inserts the small contigs within scaffolds buildfasta converts the scaffold(s) map(s) into Fasta sequences.

Address of the bookmark: http://abims.sb-roscoff.fr/wisescaffolder

TGNet

Shruti Paniwala — Wed, 24 Aug 2016 05:36:36 -0500

Recent technological progress has greatly facilitated de novo genome sequencing. However, de novo assemblies consist in many pieces of contiguous sequence (contigs) arranged in thousands of scaffolds instead of small numbers of chromosomes. Confirming and improving the quality of such assemblies is critical for subsequent analysis.

Visualization and quality assessment of de novo genome assemblies

Citation

This software is fully described in the paper:
Riba-Grognuz, Keller, Falquet, Xenarios & Wurm (2011) Visualization and quality assessment of de novo genome assemblies.

In brief, our scripts create Cytoscape files to visualize transcript evidence that suggests adjacency between scaffolds and contigs.

Software requirements

BLAT (tested with Standalone BLAT v. 32×1). Source Binaries .
Cytoscape (tested with versions 2.7.0, 2.8.2)
a UNIX machine (tested on Mac OS X 10.6 and CentOS 4.6)

Address of the bookmark: https://github.com/ksanao/TGNet

Gene Finding and Predictions

Poonam Mahapatra — Fri, 26 Aug 2016 07:26:27 -0500

In this exercise, a previously annotated gene will be used to measure the accuracy of different gene finding approaches. GRAIL, GENSCAN, geneid, FGENESH, GenomeScan, GrailEXP and GENEWISE will be used to annotate the sequence. Both search by signal, content and homology (protein and cDNA sequences) methods will be employed in order to improve the ab initio results. Weak conservation of Start codons will lead to wrong prediction of initial exons in most cases.

http://genome.crg.es/courses/Bioinformatics2003_genefinding/

Address of the bookmark: http://genome.crg.es/courses/Bioinformatics2003_genefinding/