Classificier of reads from metagenomic sequencing experiments.

•  Kawulok, J., Deorowicz, S., CoMeta: Classification of Metagenomes Using k-mers, PLOS ONE, 2015; 10(4):1–23,

CoMSA

Compressor of multiple sequence alignments of proteins.

•  Deorowicz, S., Walczyszyn, J., Debudaj-Grabysz, A., CoMSA: compression of protein multiple sequence alignment files, Bioinformatics, 2019; 35(2):22–234,

DSRC

Compressor of sequencing reads.

•  Roguski, L., Deorowicz, S., DSRC 2: Industry-oriented compression of FASTQ files, Bioinformatics, 2014; 30(15):2213–2215,
•  Deorowicz, S., Grabowski, Sz., Compression of DNA sequences in FASTQ format, Bioinformatics, 2011; 27(6):860–862,

FAMSA

Multiple sequence alignment designed for huge families of proteins (even containing hundreds of thousands of sequences).

•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., FAMSA: Fast and accurate multiple sequence alignment of huge protein families, Scientific Reports, 2016; 6(33964):

FaStore

Compressor of FASTQ files.

•  Roguski, L., Ochoa, I., Hernaez, M., Deorowicz, S., FaStore - a space-saving solution for raw sequencing data, Bioinformatics, 2018; 34(16):2748–2756,

FQSqueezer

Experimental high-end compressor of FASTQ files.

•  Deorowicz, S., FQSqueezer: k-mer-based compression of sequencing data, Scientific Reports, 2020; 10(578):

GDC

Compressor of collections of genome sequences.

•  Deorowicz, S., Danek, A., Niemiec, M., GDC 2: Compression of large collections of genomes, Scientific Reports, 2015; 5(11565):1–12,
•  Deorowicz, S., Grabowski, Sz., Robust relative compression of genomes with random access, Bioinformatics, 2011; 27(21):2979–2986,

GTC

Genotype databases compressor with support for fast queries.

•  Danek, A., Deorowicz, S., GTC: how to maintain huge genotype collections in a compressed form, Bioinformatics, 2018; 34(11):1834–1840,

GTShark

Genotypes compressor.

•  Deorowicz, S., Danek, A., GTShark: Genotype compression in large projects, Bioinformatics, 2019; 35(22):4791–4793,

KMC

Memory frugal k-mer counter.

•  Kokot, M., Długosz, M., Deorowicz, S., KMC 3: counting and manipulating k -mer statistics, Bioinformatics, 2017; 33(17):2759–2761,
•  Deorowicz, S., Kokot, M., Grabowski, Sz., Debudaj-Grabysz, A., KMC 2: Fast and resource-frugal k-mer counting, Bioinformatics, 2015; 31(10):1569–1576,
•  Deorowicz, S., Debudaj-Grabysz, A., Grabowski, Sz., Disk-based k-mer counting on a PC, BMC Bioinformatics, 2013; 14():Article no. 160,

Kmer-db

Tool for estimation of evolutionary distances in a collection of genomes.

•  Deorowicz, S., Gudys, A., Dlugosz, M., Kokot, M., Danek, A., Kmer-db: instant evolutionary distance estimation, Bioinformatics, 2019; 35(1):133–136,

MuGI

Index allowing queries for a collection of multiple genome sequences.

•  Danek, A., Deorowicz, S., Grabowski, Sz., Indexes of Large Genome Collections on a PC, PLOS ONE, 2014; 9(10):e109384,

ORCOM

Experimental compressor of sequencing reads.

•  Grabowski, Sz., Deorowicz, S., Roguski, L., Disk-based compression of data from genome sequencing, Bioinformatics, 2014; 31(9):1389–1395,

PgSA

Index allowing queries for a collection of sequencing reads.

•  Kowalski, T., Grabowski, Sz., Deorowicz, S., Indexing arbitrary-length k-mers in sequencing reads, PLOS ONE, 2015; 10(7):1–16,

QuickProbs

Multiple sequence alignment designed especially for GPU.

•  Gudys, A., Deorowicz, S., QuickProbs 2: towards rapid construction of high-quality alignments of large protein families, Scientific Reports, 2017; 7(41553):
•  Gudys, A., Deorowicz, S., QuickProbs – A Fast Multiple Sequence Alignment Algorithm Designed for Graphics Processors, PLOS ONE, 2014; 9(2):e88901,

RECKONER

Read error corrector.

•  Maciej Długosz, M., Deorowicz, S., RECKONER: read error corrector based on KMC, Bioinformatics, 2017; 33(7):1086–1089,

TGC

Compressor of collections of genomes given in Variant Call Format (VCF) files.

•  Deorowicz, S., Danek, A., Grabowski, Sz., Genome compression: a novel approach for large collections, Bioinformatics, 2013; 29(20):2572–2578,

VCFShark

Compressor of VCF files.

•  Deorowicz, S., Danek, A., GTShark: Genotype compression in large projects, biorxiv.org, 2020; ():

Whisper

Experimental mapper of whole genome sequencing data.

•  Deorowicz, S., Gudys, A., Whisper 2: indel-sensitive short read mapping, bioRxiv.org, 2019; :
•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., Grabowski, Sz., Whisper: read sorting allows robust robust mapping of DNA sequencing data, Bioinformatics, 2019; 35(12):2043–2050,
•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., Grabowski, Sz., Robust mapping of whole genome sequencing data, Poster at The Biology of Genomes Conference, 2017;

.NET Bio

http://blogs.msdn.com/b/msr_er/archive/2011/10/18/microsoft-biology-foundation-evolves-into-new-toolkit-net-bio.aspx

A language-neutral bioinformatics toolkit built using the Microsoft 4.0 .NET Framework to help developers, researchers, and scientists.

AMPHORA ("AutoMated Phylogenomic infeRence Application")

http://wolbachia.biology.virginia.edu/WuLab/Software.html

Metagenomics analysis software

Anduril

http://www.anduril.org/anduril/site/

Component-based workflow framework for data analysis

Armadillo workflow platform

Tool for designing and executing phylogenetic workflows

AutoDock

http://autodock.scripps.edu/

suite of automated docking tools

Biochemical Algorithms Library (BALL)

http://www.ball-project.org/

C++ library and framework for molecular modeling and visualization designed for rapid prototyping

Bio4j

http://bio4j.com/

Bio4j is a bioinformatics platform and graph based database built around most data available in UniProt KB(Swiss-Prot + TrEMBL), Gene Ontology (GO), UniRef (50,90,100), RefSeq, NCBI taxonomy, and Expasy Enzyme DB

Bioclipse

www.bioclipse.net

Visual platform for chemo- and bioinformatics based on the Eclipse Rich Client Platform (RCP).

Bioconductor

http://www.bioconductor.org/

R (programming language) language toolkit

Bioinformatics Learning Tutorial (BLT)

http://sourceforge.net/projects/biotutorial/

Educational interactive tutorials and 3D animations for Replication, Transcription, and Translation

BioHaskell

http://biohaskell.org/

Haskell (programming language)

BioJava

http://biojava.org/wiki/Main_Page

Java (programming language)

BioMOBY

http://biomoby.org/

registry of web services

BioPerl

http://www.bioperl.org/wiki/Main_Page

Perl language toolkit

BioPHP

http://www.biophp.org/

PHP language toolkit

Biopython

http://biopython.org/wiki/Main_Page

Python language toolkit

BioRails

https://github.com/biorails

a data management system designed to support researchers in drug discovery

BioRuby

http://bioruby.org/

Ruby language toolkit

BioSmalltalk

https://code.google.com/p/biosmalltalk/

Smalltalk language toolkit

BioUno

http://www.biouno.org/

BioUno is a project that applies Continuous Integration tools and techniques in Bioinformatics. It uses Jenkins and its plug-in API to create biology workflows and manage computer clusters.

caCORE

ontologic representation environment

caArray

https://cabig-stage.nci.nih.gov/community/tools/caArray

ontologic representation environment

EMBOSS

http://emboss.sourceforge.net/

Suite of packages for sequencing, searching, etc.

Gaggle

https://www.gaggle.net/

A framework for interoperability between systems biology software

Galaxy

http://galaxyproject.org/

Scientific workflow and data integration system

GenePattern

http://www.broadinstitute.org/cancer/software/genepattern/

Scientific workflow system that provides access to more than 150 genomic analysis tools

GeWorkbench

http://wiki.c2b2.columbia.edu/workbench/index.php/Home

Genomic data integration platform

GMOD

http://www.gmod.org/wiki/Main_Page

Toolkit for addressing many common challenges at biological databases.

GeneProf

http://www.geneprof.org/GeneProf/

A web-based, bioinformatics software suite for the analysis of functional genomics experiments, e.g. RNA-seq or ChIP-seq.

GeneTalk

http://www.gene-talk.de/

Tool for filtering sequence variants in VCF files. Network for scientists and clinicians for expertise and knowledge exchange. Database of annotations aboute sequence variants with clinically relevant information.

GenGIS

http://kiwi.cs.dal.ca/GenGIS/Main_Page

Application that allows users to combine digital map data with information about biological sequences collected from the environment.

GenomeSpace

http://www.genomespace.org/

Centralized web application that provides data format transformations and facilitates connections with other bioinformatics tools

GENtle

http://directory.fsf.org/wiki/GENtle

An equivalent to the proprietary Vector NTI, a tool to analyze and edit DNA sequence files

Integrated Genome Browser

http://bioviz.org/igb/

Java-based desktop genome browser

Integrative Genomics Viewer (IGV)

http://www.broadinstitute.org/igv/

High-performance desktop tool for interactive visual exploration of diverse genomic data

IntAct

http://www.ebi.ac.uk/intact/

molecular interaction database

InterMine

http://intermine.github.io/intermine.org/

Extensive data warehouse system for the analysis and integration of biological datasets

Java Treeview

http://jtreeview.sourceforge.net/

microarray data viewer

LabKey Server

http://labkey.com/

platform for integrating, analyzing and sharing data

OpenClinica

https://www.openclinica.com/

software for capturing and managing data in clinical trials

PromKappa

http://xbioinformatics.wordpress.com/tag/promkappa/

PromKappa (Promoter analysis by Kappa) software program used for promoter pattern generation and promoter analysis.

MeV: Multi-Experiment Viewer

http://www.tm4.org/mev.html

a desktop application for the analysis, visualization and data-mining of large-scale genomic data

PathVisio

http://www.pathvisio.org/

a desktop software for drawing, analysis and visualization of biological pathways

REDCRAFT

software for determining tertiary protein structure given assigned Residual Dipolar Coupling data

SAM Tools

Data format (SAM) and accompanying tool suite, for storing large nucleotide sequence alignments

Staden Package

Sequence assembly, editing and analysis, primarily consisting of gap4, gap5 and spin.

STAMP

Software package for analyzing metagenomic profiles that promotes ‘best practices’ in choosing appropriate statistical techniques and reporting results.

supraHex

An open-source R/Bioconductor package for omics data analysis using a supra-hexagonal map

Taverna workbench

Tool for designing and executing workflows

TGAC Browser

Genome Browser, visualisation solutions for big data in the genomic era

T-REX WebServer

Bioinformatics and phylogenetics webserver (NJ, PhyML, RAxML, MAFFT, MUSCLE, Newick viewer, Horizontal gene transfer detection, Reticulograms, Substitution models)

UGENE

integrated bioinformatics tools

Visomics

bioinformatics tools for omics data

Genome Analysis Toolkit 1.0 (GATK 1.0)

a software package to analyse next-generation resequencing data

Read more: https://edu.t-bio.info/amity-university-summer-bioinformatics-program-registrations-are-open/

For knowledge about Linux and their importance amongst bioinformatician plesae read this article "An introduction to Linux for bioinformatics" by Paul Stothard.

Linux cheat sheet at http://bioinformaticsonline.com/file/view/87/linux-cheat-sheet

Please browse for futher useful linux pages on right hand side ...

In comparative genome analysis work, we usually compare more than two genomes and looks for syntenic regions amongst them. In my research I used Evolution Highway (RH) http://eh-demo.ncsa.uiuc.edu/, which is a collaborative project designed to provide a visual means for simultaneously comparing genomes of multiple amniote species. The tool removes the burden of manually aligning these maps and allows cognitive skills to be used toward something more valuable than preparation and transformation of data. In addition to EH, attractive Circos (http://circos.ca/) is also very popular for this kind of analysis.

The EH is available online, and can be easily access and use, whereas Circos installation is not entirely straightforward. One of the most difficult parts of the installation involves installing the GD library. Since there weren't good instructions for installing this library on the internet I decided to post instructions here in case they are useful to anyone else.

Following are the steps to install GD modules in Mac OS

1. Setup

Create a folder for the files:

$ mkdir -p /SourceCache
$ cd /SourceCache

Get and unpack the required Jpeg-6b and GD libraries:
Download Jpeg-6b (http://code.google.com/p/google-desktop-for-linux-mirror/downloads/detail?name=jpeg-6b.tar.gz&can=2&q)
Download GD (http://search.cpan.org/~lds/GD-2.46/)

Place the "tar.gz" files in "/SourceCache" and double click to unpack.

2. Install libjpeg

Copy the "config.sub" and "config.guess" files to "/SourceCache". Note that your "config.sub" and ""config.guess" files may be in a slightly different location. The commands below show where they were on my machine:

$ cd /SourceCache/jpeg-6b/src
$ cp /usr/share/libtool/config/config.sub .
$ cp /usr/share/libtool/config/config.guess .

Configure libjpeg as follows. Note that this was installed on a 64 bit machine. However, this method may configure it in a 32 bit format. This may not be the best way to configure the installation but it works.

$ .configure --enable-shared
$ make

Check to see if the following directories exist on your machine. Create the missing directories in the following manner:

$ mkdir -p /usr/local/include
$ mkdir -p /usr/local/bin
$ mkdir -p /usr/local/lib
$ mkdir -p /usr/local/man/man1

Finish making and installing libjpeg:

$ make install

3. Install GD

$ cd /SourceCache/GD-2.46/GD/
$ perl Makefile.PL
$ make
$ make test (optional)
$ make html (optional)
$ make install

Other way for Mac OS
The easiest way to get a lot of these is with a program called Fink, which is similar in nature to the CPAN installer, but installs common GNU utilities. Fink is available from <http://sourceforge.net/projects/fink/>.

Follow the instructions for setting up Fink. Once it's installed, you'll want to run the following as root: fink install gd

It will prompt you for a number of dependencies, type 'y' and hit enter to install all of the dependencies. Then watch it work.

To prevent creating conflicts with the software that Apple installs by default, Fink creates its own directory tree at /sw where it installs most of the software that it installs. This means your libraries and headers for libgd will be at /sw/lib and /sw/include instead of /usr/lib and /usr/local/include. Because of these changed locations for the libraries, the Perl GD module will not install directly via CPAN, because it looks for the specific paths instead of getting them from your environment. But there's a way around that :-)

Instead of typing "install GD" at the cpan> prompt, type look GD. This should go through the motions of downloading the latest version of the GD module, then it will open a shell and drop you into the build directory. Apply below patch to the Makefile.PL file (save the patch into a file and use the command patch < patchfile.)

Then, run these commands to finish the installation of the GD module:

perl Makefile.PL
make
make test
make install
And don't forget to run exit to get back to CPAN.

Install on MS Window, using PPM

C:\Documents and Settings\Owner>ppm
PPM interactive shell (2.2.0) - type 'help' for available commands.
PPM> install GD
Install package 'GD?' (y/N): y
Installing package 'GD'...
Downloading http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW. ...
Installing C:\Perl\site\lib\auto\GD\GD.bs
Installing C:\Perl\site\lib\auto\GD\GD.dll
Installing C:\Perl\site\lib\auto\GD\GD.exp
Installing C:\Perl\site\lib\auto\GD\GD.lib
Installing C:\Perl\html\site\lib\GD.html
Installing C:\Perl\site\lib\GD.pm
Installing C:\Perl\site\lib\qd.pl
Installing C:\Perl\site\lib\auto\GD\autosplit.ix
PPM>


If you can't install it from ppm. You can download it:
http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.


BTW,All Perl 5.6.1 Modules are located at:

http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

Install the Perl GD Module on Linux

$ sudo perl -MCPAN -e shell

Since it was the first time I had run this command on this particular machine I had to answer a lot of questions but simply selected the defaults for everything as this usually works for me. Once in the CPAN shell I entered

$ install Bundle::CPAN

and selected all of the defaults again. Once the CPAN bundle had finished installing I tried to install GD::Graph by typing

$ install GD::Graph

but it failed with hundreds of errors – the first of which was

GD.xs:7:16: error: gd.h: No such file or directory

This was fixed with the following apt-get command (in the bash shell)

$ sudo apt-get install libgd2-xpm-dev

back in the CPAN shell I still couldn’t get GD::Graph to build and I guessed this was because of some left over files from the failed build. I don’t know the command to clean things up inside the CPAN shell and am too lazy to read the docs so I simply went into the .cpan/build directory in my home directory and deleted anything that started with GD – eg

$ rm -rf GD-2.35-HC_vkB

$ rm -rf GDGraph-1.44-Evfibe

and so on. Those strings at the end (VkB and so on) look random so they might be different on your machine. Then I went back into the CPAN shell and ran

$ install GD::Graph

There were a few dependencies which the script fetched and installed for me but everything worked smoothly.

Manual and other Perl Module instalation are mentioned in my previous blog @ http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

Address of the bookmark: https://github.com/olarerin/metaPlotR

Additional Information:

If you have any questions about scientific aspects of this position, please contact Prof. Lars Bertram, head of LIGA (lars.bertram@uni-luebeck.de).

Please contact Ms. Anna Wolbert for further questions about administrative details (recruiting@uksh.de).

Weitere Informationen erhalten Sie auch unter www.uksh.de/karriere.

Wir freuen uns auf Ihre Bewerbung bis zum 15.03.2020 unter Angabe unserer Ausschreibungsnummer 20190570.119.CL.

Upgrading to R 3.2.0 on Windows

If you are using Windows you can easily upgrade to the latest version of R using the installr package. Simply run the following code:

# installing/loading the latest installr package:
install.packages("installr"); library(installr) #load / install+load installr
 
updateR() # updating R.

Running “updateR()” will detect if there is a new R version available, and if so it will download+install it (etc.).

If you are an R blogger yourself you are invited to add your own R content feed to this site (Non-English R bloggers should add themselves- here)

NEW FEATURES

• anyNA() gains a recursive argument.
• When x is missing and names is not false (including the default value), Sys.getenv(x, names) returns an object of class "Dlist" and hence prints tidily.
• (Windows.) shell() no longer consults the environment variable SHELL: too many systems have been encountered where it was set incorrectly (usually to a path where software was compiled, not where it was installed). R_SHELL, the preferred way to select a non-default shell, can be used instead.
• Some unusual arguments to embedFonts() can now be specified as character vectors, and the defaults have been changed accordingly.
• Functions in the Summary group duplicate less. (PR#15798)
• (Unix-alikes.) system(cmd, input = ) now uses ‘shell-execution-environment’ redirection, which will be more natural if cmd is not a single command (but requires a POSIX-compliant shell). (Wish of PR#15508)
• read.fwf() and read.DIF() gain a fileEncoding argument, for convenience.
• Graphics devices can add attributes to their description in .Device and .Devices. Several of those included with R use a "filepath" attribute.
• pmatch() uses hashing in more cases and so is faster at the expense of using more memory. (PR#15697)
• pairs() gains new arguments to select sets of variables to be plotted against each other.
• file.info(, extra_cols = FALSE) allows a minimal set of columns to be computed on Unix-alikes: on some systems without properly-configured caching this can be significantly faster with large file lists.
• New function dir.exists() in package base to test efficiently whether one or more paths exist and are directories.
• dput() and friends gain new controls hexNumeric and digits17 which output double and complex quantities as, respectively, binary fractions (exactly, see sprintf("%a")) and as decimals with up to 17 significant digits.
• save(), saveRDS() and serialize() now support ascii = NA which writes ASCII files using sprintf("%a") for double/complex quantities. This is read-compatible with ascii = TRUE but avoids binary->decimal->binary conversions with potential loss of precision. Unfortunately the Windows C runtime’s lack of C99 compliance means that the format cannot be read correctly there in R before 3.1.2.
• The default for formatC(decimal.mark =) has been changed to be getOption("OutDec"); this makes it more consistent with format() and suitable for use in print methods, e.g. those for classes "density", "ecdf", "stepfun" and "summary.lm".

  getOption("OutDec") is now consulted by the print method for class "kmeans", by cut(), dendrogram(), plot.ts() and quantile() when constructing labels and for the report fromlegend(trace = TRUE).

  (In part, wish of PR#15819.)

• printNum() and hence format() and formatC() give a warning if big.mark and decimal.mark are set to the same value (period and comma are not uncommonly used for each, and this is a check that conventions have not got mixed).
• merge() can create a result which uses long vectors on 64-bit platforms.
• dget() gains a new argument keep.source which defaults to FALSE for speed (dput() and dget() are most often used for data objects where this can make dget() many times faster).
• Packages may now use a file of common macro definitions in their help files, and may import definitions from other packages.
• A number of macros have been added in the new ‘share/Rd’ directory for use in package overview help pages, and promptPackage() now makes use of them.
• tools::parse_Rd() gains a new permissive argument which converts unrecognized macros into text. This is used by utils:::format.bibentry to allow LaTeX markup to be ignored.
• options(OutDec =) can now specify a multi-byte character, e.g., options(OutDec = "u00b7") in a UTF-8 locale.
• is.recursive(x) is no longer true when x is an external pointer, a weak reference or byte code; the first enables all.equal(x, x) when x .
• ls() (aka objects()) and as.list.environment() gain a new argument sorted.
• The "source" attribute (which has not been added to functions by R since before R version 2.14.0) is no longer treated as special.
• Function returnValue() has been added to give on.exit() code access to a function’s return value for debugging purposes.
• crossprod(x, y) allows more matrix coercions when x or y are vectors, now equalling t(x) %*% y in these cases (also reported by Radford Neal). Similarly, tcrossprod(x,y) and %*% work in more cases with vector arguments.
• Utility function dynGet() useful for detecting cycles, aka infinite recursions.
• The byte-code compiler and interpreter include new instructions that allow many scalar subsetting and assignment and scalar arithmetic operations to be handled more efficiently. This can result in significant performance improvements in scalar numerical code.
• apply(m, 2, identity) is now the same as the matrix m when it has named row names.
• A new function debuggingState() has been added, allowing to temporarily turn off debugging.
• example() gets a new optional argument run.donttest and tools::Rd2ex() a corresponding commentDonttest, with a default such that example(..) in help examples will run donttest code only if used interactively (a change in behaviour).
• rbind.data.frame() gains an optional argument make.row.names, for potential speedup.
• New function extSoftVersion() to report on the versions of third-party software in use in this session. Currently reports versions of zlib, bzlib, the liblzma from xz, PCRE, ICU, TRE and the iconv implementation.

  A similar function grSoftVersion() in package grDevices reports on third-party graphics software.

  Function tcltk::tclVersion() reports the Tcl/Tk version.

• Calling callGeneric() without arguments now works with primitive generics to some extent.
• vapply(x, FUN, FUN.VALUE) is more efficient notably for large length(FUN.VALUE); as extension of PR#16061.
• as.table() now allows tables with one or more dimensions of length 0 (such as as.table(integer())).
• names(x) now clears the names of call and ... objects.
• library() will report a warning when an insufficient dependency version is masking a sufficient one later on the library search path.
• A new plot() method for class "raster" has been added.
• New check_packages_in_dir_changes() function in package tools for conveniently analyzing how changing sources impacts the check results of their reverse dependencies.
• Speed-up from Peter Haverty for ls() and methods:::.requirePackage() speeding up package loading. (PR#16133)
• New get0() function, combining exists() and get() in one call, for efficiency.
• match.call() gains an envir argument for specifying the environment from which to retrieve the ... in the call, if any; this environment was wrong (or at least undesirable) when thedefinition argument was a function.
• topenv() has been made .Internal() for speedup, based on Peter Haverty’s proposal in PR#16140.
• getOption() no longer calls options() in the main case.
• Optional use of libcurl (version 7.28.0 from Oct 2012 or later) for Internet access:
  • capabilities("libcurl") reports if this is available.
  • libcurlVersion() reports the version in use, and other details of the "libcurl" build including which URL schemes it supports.
  • curlGetHeaders() retrieves the headers for http://, https://, ftp:// and ftps:// URLs: analysis of these headers can provide insights into the ‘existence’ of a URL (it might for example be permanently redirected) and is so used in R CMD check --as-cran.
  • download.file() has a new optional method "libcurl" which will handle more URL schemes, follow redirections, and allows simultaneous downloads of multiple URLs.
  • url() has a new method "libcurl" which handles more URL schemes and follows redirections. The default method is controlled by a new option url.method, which applies also to the opening of URLs via file() (which happens implicitly in functions such as read.table.)
  • When file() or url() is invoked with a https:// or ftps:// URL which the current method cannot handle, it switches to a suitable method if one is available.
• (Windows.) The DLLs ‘internet.dll’ and ‘internet2.dll’ have been merged. In this version it is safe to switch (repeatedly) between the internal and Windows internet functions within an Rsession.

  The Windows internet functions are still selected by flag –internet2 or setInternet2(). This can be overridden for an url() connection via its new method argument.

  download.file() has new method "wininet", selected as the default by –internet2 or setInternet2().

• parent.env<- can no longer modify the parent of a locked namespace or namespace imports environment. Contributed by Karl Millar.
• New function isLoadedNamespace() for readability and speed.
• names(env) now returns all the object names of an environment env, equivalently to ls(env, all.names = TRUE, sorted = FALSE) and also to the names of the corresponding list,names(as.list(env, all.names = TRUE)). Note that although names() returns a character vector, the names have no particular ordering.
• The memory manager now grows the heap more aggressively. This reduces the number of garbage collections, in particular while data or code are loaded, at the expense of slightly increasing the memory footprint.
• New function trimws() for removing leading/trailing whitespace.
• cbind() and rbind() now consider S4 inheritance during S3 dispatch and also obey deparse.level.
• cbind() and rbind() will delegate recursively to methods::cbind2 (methods::rbind2) when at least one argument is an S4 object and S3 dispatch fails (due to ambiguity).
• (Windows.) download.file(quiet = FALSE) now uses text rather than Windows progress bars in non-interactive use.
• New function hsearch_db() in package utils for building and retrieving the help search database used by help.search(), along with functions for inspecting the concepts and keywords in the help search database.
• New function .getNamespaceInfo(), a no-check version of getNamespaceInfo() mostly for internal speedups.
• The help search system now takes keyword entries in Rd files which are not standard keywords (as given in ‘KEYWORDS’ in the R documentation directory) as concepts. For standard keyword entries the corresponding descriptions are additionally taken as concepts.
• New lengths() function for getting the lengths of all elements in a list.
• New function toTitleCase() in package tools, tailored to package titles.
• The matrix methods of cbind() and rbind() allow matrices as inputs which have 2^31 or more elements. (For cbind(), wish of PR#16198.)
• The default method of image() has an explicit check for a numeric or logical matrix (which was always required).
• URLencode() will not by default encode further URLs which appear to be already encoded.
• BIC(mod) and BIC(mod, mod2) now give non-NA numbers for arima() fitted models, as nobs(mod) now gives the number of “used” observations for such models. This fixes PR#16198, quite differently than proposed there.
• The print() methods for "htest", "pairwise.htest" and "power.htest" objects now have a digits argument defaulting to (a function of) getOption("digits"), and influencing all printed numbers coherently. Unavoidably, this changes the display of such test results in some cases.
• Code completion for namespaces now recognizes all loaded namespaces, rather than only the ones that are also attached.
• The code completion mechanism can now be replaced by a user-specified completer function, for (temporary) situations where the usual code completion is inappropriate.
• unzip() will now warn if it is able to detect truncation when unpacking a file of 4GB or more (related to PR#16243).
• methods() reports S4 in addition to S3 methods; output is simplified when the class argument is used. .S3methods() and methods::.S4methods() report S3 and S4 methods separately.
• Higher order functions such as the apply functions and Reduce() now force arguments to the functions they apply in order to eliminate undesirable interactions between lazy evaluation and variable capture in closures. This resolves PR#16093.

More at http://cran.rstudio.com/

Reference: http://www.r-bloggers.com/r-3-2-0-is-released-using-the-installr-package-to-upgrade-in-windows-os/