Applications are invited for the AiCADD fellowship (MHRD, Govt. of India) of University of Kerala.

The terms and conditions of the fellowship is given below:

Ø The AiCADD PhD Fellowship scheme will be available for the students registered for full-time research or intending to register and pursue full time research at SIUCEB in frontier areas of bioinformatics, computational biology, systems biology and closely allied areas with focus on Ayur-Informatics.

Ø The fellowships will be widely announced and open to students irrespective of geographical consideration.

Ø Candidates availing of this fellowship shall not be in receipt of any other fellowships concurrently.

Ø Researchers will be selected on the basis of research aptitude test and personal interview.

Ø Each selected student will be eligible for a monthly fellowship of Rs. 10,000/- for the 1st and 2nd year and Rs. 12,000/- for the 3rd year.

Ø Candidates must register for PhD within one year of joining, failing which the fellowship will have to be remitted back.

Ø Candidates receiving the fellowship shall submit bi-annual reports of progress and the continuation of the fellowship will be based on the evaluation of the same.

Ø Candidates are also required to take up academic duties including teaching upto a maximum of 6 hours per week, as directed by AiCADD Principal Investigator.

Interested candidates may please forward their application along with resume on or before 15th November 2014 in the following address. Principal Investigator, AiCADD Centre, Dept. of Computational Biology and Bioinformatics, University of Kerala, Thiruvananthapuram - 695581.

More at https://sites.google.com/site/centreforbioinformatics/announcements

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator 

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM 

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq 

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer 

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView 

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI 

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview 

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR 

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA 

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV) 

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite 

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

Experience Required: 3-5 years of experience

No of Positions : Multiple

Qualifications: Candidates with minimum qualification as M.Sc Bioinformatics with 3-5 years of experience in Life sciences R&D or Pharma Industry.

Ph.D candidates with research experience in Bioinformatics with publications in International journal and minimum 2 years of industry experience in clinical genomics will be preferred for this position.

Requirement:

1. Must have basic understanding of molecular biology and Genomics.

2. Experience in application development or must have expertise in programming using either of Perl/Python.

3. Experience in statistical programming using R/Bioconductor/Matlab.

4. Strong concept in statistical and mathematical modelling.

5. Experience in designing and developing the bioinformatics pipeline.

6. Must have minimum 2+ years of hands on experience in NSG data analysis such as RNA-Seq,Exome-Seq ,Chip-Seq and downstream analysis.

7. Knowledge in WGS ,WES, Targeted re-sequencing,GWAS and population genomics will be preferred.

8. Must have experience working on opensource software/Framework and commercial software for NGS data analysis and reporting.

9. Should be aware of handling big data and guiding team members on multiple projects simultaneously.

10. Should have experience coordinating with different groups of clinical research scientist for various project requirements.

11. Ability to work as team as well as independently with minimal support.

More at http://www.ocimumbio.com/careers1/

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

Address of the bookmark: https://www.molinspiration.com/

Qualification: Highly motivated M.Sc. (Bioinformatics/ Biotechnology/ Life Sciences/ Botany/ Agriculture) students are encouraged to apply. Prior experience in Bioinformatics/Plant tissue culture work is preferable. Preferences would be given to DBT/ CSIR / UGC NET qualified students.

Application Procedure: A detailed CV indicating name, date of birth, address, contact number, e-mail address, educational qualifications, NET qualified or not, research experiences if any, should be e-mailed to This email address is being protected from spambots. You need JavaScript enabled to view it. on or before 24th December 2014.

Important Note: Only short listed candidates will be called for interview at Akbar Bhawan, Chanakyapuri, New Delhi. No TA/DA will be paid for attending the interview. SAU Selection Committee reserves the rights to relax any of the qualifications in case the candidate is found otherwise well qualified. The above- mentioned post is temporary and will be initially offered for a period of one year, which can be extended to one more year.

Advertisement: www.sau.ac.in/recruitment/vacancy.html

More at https://dahak-metagenomics.github.io/dahak/

Address of the bookmark: https://github.com/dahak-metagenomics/dahak

Walk in interview for Research Associate, Studentship and Traineeship at BIF

Applications are invited for the Post of Research Associate, Traineeship and Studentship in the DBT sponsored Bioinformatics Infrastructure Facility (BIF) at the Bioinformatics Centre, Department of RDAP, North-Eastern Hil University, Tura Campus, Tura-79402, Meghalaya. The Posts are purely temporary and terminable at any time without prior notice or assigning any reason thereof. The person engaged, shall not be entailed for any claim implicit or explicit for permanent absorption in the University.

Research Associate- 01

Essential Qualification: M.Sc. in Bioinformatics/Biotechnology from a recognized University/ institute.

Desirable: PhD or Pursuing PhD in the relevant subject(s) or equivalent published work in reputed peer reviewed journals or Advance PG diploma in Bioinformatics courses.

Duties: Creation of database, web designing, maintenance of internet, training of students in Bioinformatics, handling and knowledge of Bioinformatics software tools and technique, conducting Bioinformatics based research and other day to day laboratory work, writing report and scientific papers.

Pay:Rs. 2,00/- + Admissible 10% HRA per month

Age: Below 35 years

Traineeship- 02

Students who have completed Masters Degree in Bioinformatics/Biotechnology or any branch of Life Sciences/Agricultural Sciences/Computer Science to cary out a project work in Bioinformatics.

Desirable: Prior Knowledge of programming languages such as C, JAVA, MySQL is preferable.

Stipend: Rs. 800/- p.m. fixed. Purely temporary for a period of six months.

Studentship: 02

Students pursuing postgraduate degree in Bioinformatics/biotechnology/Agricultural Sciences or any branch of Life Science

Desirable: Prior knowledge of bioinformatics/ programming language is preferable.

Stipend: 800/- p.m. fixed. Purely temporary for a period of six months.

Candidates must send the detailed Biodata via mail/post and bring al the relevant documents in original and one set of attested photocopies of the same at the time of interview. No TA/DA will be paid for attending the interview and candidates have to make their own arrangements.

Last date for receiving application by mail or by post: 16.02.2014

Contact Information:
Dr.B.K. Mishra
Cordinator BIF,
RDAP Department, NEHU, Tura Campus
Phone: 91-03651-23107
Fax: 91-03651-23953
E-mail: drbkm1972@yaho.co.in, birendramishra14@gmail.com

Advertisement: http://www.nehu.ac.in/Advertisements/BIF_TuraAdtvPV_171214.pdf

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD