Pockets Identification

CASTp

Pocket-Finder

PocketPicker

Following are the useful links:

Single Cell RNAseq data analysis Tutorial

A step-by-step workflow for low-level analysis of single-cell RNA-seq data

A step-by-step workflow for low-level analysis of single-cell RNA-seq data with Bioconductor

SCell: single-cell RNA-seq analysis software

https://github.com/diazlab/SCell

Beta-Poisson model for single-cell RNA-seq data analyses

https://github.com/nghiavtr/BPSC

Sincera: A Computational Pipeline for Single Cell RNA-Seq Profiling Analysis

https://research.cchmc.org/pbge/sincera.html

SC3 – consensus clustering of single-cell RNA-Seq data

http://biorxiv.org/content/early/2016/09/02/036558

Citrus: A toolkit for single cell sequencing analysis

http://biorxiv.org/content/early/2016/09/14/045070

Single-Cell Resolution of Temporal Gene Expression during Heart Development

http://www.cell.com/developmental-cell/fulltext/S1534-5807(16)30682-7

Scalable latent-factor models applied to single-cell RNA-seq data separate biological drivers from confounding effects

http://biorxiv.org/content/early/2016/11/15/087775

Single cell transcriptomes identify human islet cell signatures and reveal cell-type-specific expression changes in type 2 diabetes

http://genome.cshlp.org/content/early/2016/11/18/gr.212720.116.abstract

SCODE: An efficient regulatory network inference algorithm from single-cell RNA-Seq during differentiation

http://biorxiv.org/content/early/2016/11/21/088856

SCOUP is a probabilistic model to analyze single-cell expression data during differentiation

https://github.com/hmatsu1226/SCOUP

scLVM is a modelling framework for single-cell RNA-seq data

https://github.com/PMBio/scLVM

Selective Locally linear Inference of Cellular Expression Relationships (SLICER) algorithm for inferring cell trajectories

https://github.com/jw156605/SLICER

SinQC: A Method and Tool to Control Single-cell RNA-seq Data Quality

http://www.morgridge.net/SinQC.html

TSCAN: Pseudo-time reconstruction and evaluation in single-cell RNA-seq analysis

https://github.com/zji90/TSCAN

Visualization and cellular hierarchy inference of single-cell data using SPADE

http://www.nature.com/nprot/journal/v11/n7/full/nprot.2016.066.html

OEFinder: Identify ordering effect genes in single cell RNA-seq data

https://github.com/lengning/OEFinder

Many times in bioinformatics we need to deal with huge datasets which  are more than 100GB size. The traditional way to analysis a file is using the while loop

while (FILE){

Do something;

}

This is very slow(since we are using only one processor) and if we have 500 million lines in the dataset it takes more than a day to iterate through the whole dataset. So how do we make best use of all our processors and get the work done quickly?

Here is a very simple and efficient technique with perl which i have been using. I am  more inclined towards using perl fork than perl threads.

One of the oldest way to fork is

my $fork = fork();
if($fork){   
push (@childs,$fork); 
}
elseif($fork==0){
your code here;
exit(0);
}
else{die “Couldnt fork : $!”;}

## wait for the child process to finish
foreach(@childs){
my $tmp=waitid($_,0);
}

what a fork does is it creates a child process and takes the variables and code with it to analyze it separately (detached from the parent process) and thus a separate process is created( which usually runs on a separate processor). Thats it!! One big disadvantage of forking is its very difficult to share variables among the different processes. I will show you how to do it easily but still it has its own drawbacks.

Okie, now if you really do not want to use fork in your code, that’s okie too..There are many useful modules which do it for you very efficiently. One really useful module is Parallel::ForkManager. You can use Parallel::ForkManager to manage the number of forks you want to generate (number of processors you want to use).

Simple usage:
use Parallel::ForkManager;
my $max_processors=8;
my $fork= new Parallel::ForkManager($max_processors);
foreach (@dna) {
$fork->start and next; # do the fork
you code here;
$fork->finish; # do the exit in the child process
}
$pm->wait_all_children;

so you will be generating 8 forks which do the same thing for your each element of array. when one child finishes, Parallel::ForkManager generates a new one and thus you will be using all your processors to analyze the data. Now, if you have generated 8 child processes and want to write the data to one file. You need to lock the file to do this, because you will have problems with the buffering. You can lock the file using flock command.

open (my $QUAL, “myfile.txt”);
flock $QUAL, LOCK_EX or die “cant lock file $!”;
print $QUAL “$output”;
flock $QUAL, LOCK_UN or die “$!”;
close $QUAL;

I would not suggest using flock when dealing with multiple processes because it will decrease the processing efficiency( each child process must wait for the lock to be released by the other child process). Instead, I would suggest each fork writing to a separate file and after the processing just concatenating them.

Putting it all together, If you have 100GB data you can do this

step 1 : split the dataset equally according to number of processors you have. this may take a few hours(about 2-3 hrs for 100GB file)
You can use unix “split” command for this
for example:
my $number_split=int($number_of_entries_in_your_dataset/$max_processors);
my $split_Files=`split -l $number_split “your_file.fasta” “file_name”`;

step2: open you directory comtaining you split files and start Parallel::ForkManager.
For example:
opendir(DIRECTORY, $split_files_directory) or die $!; ### open the directory
my $fork= new Parallel::ForkManager($max_processors);
while (my $file = readdir(DIRECTORY)) { ### read the directory
if($file=~/^\./){next;}
print $file,”\n”;
########## Start fork ##########
my $pid= $super_fork->start and next;
Whatever you want to do with the split file ;
analyze my piece of $file;
######### end fork ###############
$super_fork->finish;
}
$super_fork->wait_all_children;

So basically each processor will be active with its piece of data (split file) and thus you have created 8 processes at one time which run without interfering with the other process. I again will not suggest writing output from each child process to one file(for reasons above). Write output from each fork to a separate file and finally concatenate them. Thats it, you have just increased your program speed by 8 times!! Isnt it easy?

Note:
You may worry about concatenation of the output each child generates, since it does take some time(remember 100GB). I think now you can use a mysql database LOAD DATA LOCAL INFILE command to load all the files into a single table(Should take about 3hrs for 100Gb dataset) and then export the whole table into one file. This should be faster than just concatenating them using “cat” command.(correct me if I am wrong)

Or much simpler way is to use pipes

cat output_dir/* | my_pipe or my_pipe <(file1) final_file;

Thats it guys!! Enjoy programming and please do comment. I am not a computer scientist so forgive me for any mistakes and if any please report them. Thank you.

Requirements
- 3-5 years of relevant bioinformatics experience such as public data mining,
processing, analysing and visualising omics data, etc.
- Ph.D., Masters or Bachelors in Bioinformatics, Biotechnology,
Computational Biology, or related field.
- Understanding of molecular biology and biochemistry.
- Comfort and experience with biological research and data.
- Proficient in a programming language used for bioinformatics such as R or
python.
- Excellent communication skills.
- Ability to summarise and simplify complex analyses for a non-technical
audience.
- Strong analytical skills, curiosity and a knack to solve difficult problems.
- Work well in multi-disciplinary teams with people of vastly different
backgrounds.
- Demonstrated success in collaboration and independent work.

More at https://angel.co/elucidata/jobs/460104-senior-bioinformatics-scientist

1. Supply your genes/genomic segments/phylogenetic tree of interest in the input-box by
   • selecting the type of identifier and pasting identifiers (one per line)
   • or by using the gene ID search tool
   • or with the BLAST search tool
2. Click "Visualize context".

Consult the documentation to learn more about MGcV.

Address of the bookmark: http://mgcv.cmbi.ru.nl/

Also, Bioinformatics Industrial Training Program (BIITP) is merged with the HRD Biotechnology Industrial Training Programme (BITP).

While this comes as a surprise for a lot of participants. We believe this is a good attempt to unify and create a national benchmark for talent. And we appreciate this endeavor from Department of biotechnology.

However, such last-minute announcements can create confusion. Thus candidates are advised to go through the complete notification DBT-BET JRF 2019 via the link below.If you have any kind of doubts, you must contact DBT JRF or Biotecnika for any kind of help & assistance.

Attention:-Bioinformatics Programs (BINC and BIITP)

1. Bioinformatics National Certification (BINC) has been merged with DBT-Junior
Research Fellow (BET Exam)

2. Bioinformatics Industrial Training Program (BIITP) is merged with HRDBiotechnology Industrial Training Programme (BITP).

Students of Bioinformatics, who are interested to apply for Fellowship or Industrial
Training may keep track of the advertisement of DBT-JRF (BET Exam) and BITP
of DBT.

 More at http://www.bcil.nic.in/files/Attention_Bioinformatics_Programs_(BINC_and_BIITP).pdf

No previous programming knowledge is assumed. By following this tutorial you will learn the fundamental concepts of programming by using scripting languages: variables, types, arrays, cycles, conditional statements, functions, objects, regular expressions, files reading and manipulation et-cetera.

Address of the bookmark: http://www.cellbiol.com/bioinformatics_web_development/introduction/

DeepVariant is an analysis pipeline that uses a deep neural network to call genetic variants from next-generation DNA sequencing data. DeepVariant relies on Nucleus, a library of Python and C++ code for reading and writing data in common genomics file formats (like SAM and VCF) designed for painless integration with the TensorFlow machine learning framework.

https://ai.googleblog.com/2017/12/deepvariant-highly-accurate-genomes.html

https://www.biorxiv.org/content/10.1101/092890v6

Address of the bookmark: https://github.com/google/deepvariant

More at http://clark.genetics.utah.edu/

https://academic.oup.com/bioinformatics/article/35/12/2153/5162749

Address of the bookmark: https://github.com/arzwa/wgd