BOL: Related items

Sequence assembly with MIRA 4

Priya Singh — Wed, 06 Apr 2016 08:21:22 -0500

MIRA is a multi-pass DNA sequence data assembler/mapper for whole genome and EST/RNASeq projects. MIRA assembles/maps reads gained by

electrophoresis sequencing (aka Sanger sequencing)
454 pyro-sequencing (GS20, FLX or Titanium)
Ion Torrent
Solexa (Illumina) sequencing
(in development) Pacific Biosciences sequencing

into contiguous sequences (called contigs). One can use the sequences of different sequencing technologies either in a single assembly run (a true hybrid assembly) or by mapping one type of data to an assembly of other sequencing type (a semi-hybrid assembly (or mapping)) or by mapping a data against consensus sequences of other assemblies (a simple mapping).

The MIRA acronym stands for Mimicking Intelligent Read Assembly and the program pretty well does what its acronym says (well, most of the time anyway). It is the Swiss army knife of sequence assembly that I've used and developed during the past 14 years to get assembly jobs I work on done efficiently - and especially accurately. That is, without me actually putting too much manual work into it.

More at http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Address of the bookmark: http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Understanding Fastqc Output

Jit — Fri, 15 Apr 2016 05:47:40 -0500

Understanding Following table and graphs

Duplication level
kmer profile
per base GC content
per base N content
per base quality
per base sequence content
per sequence GC content
per sequence quality
sequence length distribution

More at http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

HGA

Jit — Tue, 29 Nov 2016 07:25:53 -0600

HGA tool version 1.0 This tool helps to apply the Hierarchical Genome Assembly (HGA) method. The tool will apply: 1. Partitioning a given reads dataset into a given number of partitions. 2. Assembling each partitions using a pre-specified assembler (Velvet or SPAdes in this version) and using a given kmer size. 3. Merging all the assemblies of the partition. 4. Combining all the assemblies of the partition (using velvet with kmer value of 31). 5. Finaly, re-assembling the whole dataset with the merged contigs or the combined contigs, using a given kmer size.

https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Address of the bookmark: https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

ScaffMatch

Jit — Tue, 13 Dec 2016 10:23:56 -0600

caffMatch is a novel scaffolding tool based on Maximum-Weight Matching able to produce high-quality scaffolds from NGS data (reads and contigs). The tool is written in Python 2.7. It also includes a bash script wrapper that calls aligner in case one needs to first map reads to contigs (instead of providing .sam files).

The arguments accepted by ScaffMatch are:

-w) Working directory -- this is the directory where ScaffMatch files are stored. These are .sam files produced after mapping reads to contigs and the resulting scaffolds file `scaffolds.fa` fasta file;

-c) Contig fasta file;

-m) Command line argument with no options. It is used when .sam files are used instead of reads .fastq files. Do not use this option if you provide reads files;

-1) (Comma separated list of) either .fastq or .sam file(s) corresponding to the first read of the read pair;

-2) (Comma separated list of) either .fastq or .sam file(s) corresponding to the second read of the read pair;

-i) (Comma separated list of) insert size(s) of the library(-ies);

-s) (Comma separated list of) library(-ies) standard deviation(s) of insert size(s);

-t) Bundle threshold. Pairs of contigs supported by number of read pairs less than the value of this argument are discarded. Optional argument, by default it is equal to 5;

-g) Matching heuristics: use `max_weight` for Maximum Weight Matching heuristics with the Insertion step, use `backbone` for Maximum Weight Matching heuristics without the Insertion step, use `greedy` for Greedy Matching heuristics;

-l) Log file - where to store the logs. Optional argument. By default, stdout is used.

Address of the bookmark: http://alan.cs.gsu.edu/NGS/?q=content/scaffmatch

PEAR

Jit — Mon, 19 Dec 2016 09:28:30 -0600

PEAR is an ultrafast, memory-efficient and highly accurate pair-end read merger. It is fully parallelized and can run with as low as just a few kilobytes of memory.

PEAR evaluates all possible paired-end read overlaps and without requiring the target fragment size as input. In addition, it implements a statistical test for minimizing false-positive results. Together with a highly optimized implementation, it can merge millions of paired end reads within a couple of minutes on a standard desktop computer.

Address of the bookmark: http://sco.h-its.org/exelixis/web/software/pear/doc.html

Genome Assembly Tutorial

Abhimanyu Singh — Tue, 20 Dec 2016 07:56:01 -0600

If genomes were completely random sequences in a statistical sense, 'overlap-consensus-layout' method would have been enough to assemble large genomes from Sanger reads. In contrast, real genomes often have long repetitive regions, and they are hard to assemble using overlap-consensus-layout approach. De Bruijn graph-based assembly approach was originally proposed to handle the assembly of repetitive regions better.

More at http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

Address of the bookmark: http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

Harvest

Jit — Tue, 31 Jan 2017 10:57:56 -0600

Harvest is a suite of core-genome alignment and visualization tools for quickly analyzing thousands of intraspecific microbial genomes, including variant calls, recombination detection, and phylogenetic trees.

Tools

Parsnp - Core-genome alignment and analysis
Gingr - Interactive visualization of alignments, trees and variants
HarvestTools - Archiving and postprocessing

Citation

Treangen TJ, Ondov BD, Koren S, Phillippy AM. The Harvest suite for rapid core-genome alignment and visualization of thousands of intraspecific microbial genomes. Genome Biology, 15 (11), 1-15 [PDF]

Address of the bookmark: http://harvest.readthedocs.io/en/latest/index.html