Know of any other open source software for PacBio data? Email us.

Software categories:

• De novo assembly
• Structural Variations Detection
• Reference-based alignment
• Consensus and variant calling
• RNA analysis
• Epigenetic base modifications and methylation
• Barcoding
• Genome Browsers
• Run QC
• Frameworks and APIs

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

• hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
• gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
• comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
• sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
• blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
• filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
  • kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
  • seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
• plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
  • density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
  • profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
  • spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
  • spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
  • spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339 

Address of the bookmark: https://github.com/TGAC/KAT

https://academic.oup.com/nar/article/47/11/e63/5377471

Address of the bookmark: https://github.com/linzhi2013/MitoZ

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

More at http://faculty.iisertvm.ac.in/~nishantkt/index.html

http://katjulab.com/research.html

Canu is a hierachical assembly pipeline which runs in four steps:

• Detect overlaps in high-noise sequences using MHAP
• Generate corrected sequence consensus
• Trim corrected sequences
• Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

HiCdat is easy-to-use and provides solutions starting from aligned reads up to in-depth analyses. Importantly, HiCdat is focussed on the analysis of larger structural features of chromosomes, their correlation to genomic and epigenomic features, and on comparative studies. It uses simple input and output formats and can therefore easily be integrated into existing workflows or combined with alternative tools.

More at http://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-015-0678-x

Address of the bookmark: https://github.com/MWSchmid/HiCdat

WiseScaffolder is a stand-alone semi-automatic application for genome scaffolding of pre-assembled contigs using mate-pair data. It also produces editable scaffold maps, allowing either to build gapped scaffolds or usable as a common thread for the manual improvement of scaffolds.

Description 

WiseScaffolder includes 4 subcommands: dumpconfig generates a configuration file that notably specifies the average insert size of the mate-pair library preprocess allows the detection and correction of chimerae, the estimation of contigs copy number and produces valuable outputs for the manual improvement of scaffolds scaffold constitutes the central scaffold-builder and comprises two modules:

i) the interative_scaffold_extender, which works with big, unambiguous contigs, or when they run out, single copy contigs, and

ii) the small_contig_inserter, which inserts the small contigs within scaffolds buildfasta converts the scaffold(s) map(s) into Fasta sequences.

Address of the bookmark: http://abims.sb-roscoff.fr/wisescaffolder

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

More at https://github.com/marcelm/cutadapt

Address of the bookmark: http://cutadapt.readthedocs.io/en/stable/guide.html