Tasks:  239 total,   1 running,  238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s):  0.0%us,  0.0%sy,  0.0%ni,100.0%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used,  14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  1 root      39   19  0  0  0 S  0.0  0.0   246:57.22 kipmi0
  2 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Address of the bookmark: https://training.galaxyproject.org/training-material/topics/variant-analysis/tutorials/non-dip/tutorial.html

Assistant Professor in Bioinformatics

Essential :
First Class Master’s Degree in the appropriate branch of Life Sciences / Technology (Tech.)
OR
Ph.D in Life Sciences or in the respective subject area of specialization
OR
Good Academic record with at least 55% marks (or an equivalent grade) at the Master’s Degree level, in the relevant subject or an equivalent degree from an Indian / Foreign University.
Besides fulfilling the above qualifications, candidates should have cleared the eligibility test (NET) for lecturers conducted by the UGC, CSIR or similar test accredited by the UGC and as per the requirements of UGC guidelines.

Desirable :
Teaching, research industrial and/or professional experience in a reputed organization.
Papers presented at Conferences and/or in refereed journals

Note : Application are invited in prescribed form Click here for Application Form
Kindly send your applications to “Registrar, Dr. D. Y. Patil Vidyapeeth, Pune, Sant Tukaram Nagar, Pimpri, Pune – 411018., Maharashtra, India.” should reach in the University office within 15 days from the publication.

More Info: http://www.dpu.edu.in/BiotechResearchPositions.aspx

https://academic.oup.com/nar/article/47/11/e63/5377471

Address of the bookmark: https://github.com/linzhi2013/MitoZ

As one of the leading research-intensive universities in China, ZJU is located in the beautiful city of Hangzhou. Successful candidates will be employed as Principal Investigators and are qualified to supervise doctoral students. ZJU will offer an internationally competitive salary and the opportunity to purchase university's apartment at a price much lower than the market price, and will provide office and laboratory spaces as well as internationally competitive research startup packages.

Qualified applicants are strongly encouraged to submit their applications electronically to tr@zju.edu.cn. Applicants should include the following materials in pdf format: a comprehensive CV, a statement of research and teaching plan, and a list of 3 to 5 references with detailed contact information.

Contact：Talents Office, ZJU

Tel：+86-571-88981345, +86-571-88981390

Fax：+86-571-88981976

E-mail:tr@zju.edu.cn

https://www.bioconductor.org/packages/devel/bioc/vignettes/maftools/inst/doc/maftools.html

Address of the bookmark: https://github.com/PoisonAlien/maftools

sudo /etc/init.d/apache2 stop

sudo /etc/init.d/mysql stop

sudo /etc/init.d/proftpd stop

sudo /opt/lampp/lampp start

PhpMyAdmin “Wrong permissions on configuration file, should not be world writable!”

Once the Xammp is installed, it might be possible to set up the configuration file in writable mode. Try the following steps:

Just chmod 0755 the file

sudo chmod 0755 config.inc.php

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

• illumina_R1.fastq.gz: the Illumina forward reads
• illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

• -1 is input file of forward reads
• -2 is input file of reverse reads
• --careful minimizes mismatches and short indels
• --cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
• -o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Smudgeplots are computed from raw or even better from trimmed reads and show the haplotype structure using heterozygous kmer pairs. For example:

Address of the bookmark: https://github.com/KamilSJaron/smudgeplot