BOL: Related items

Complete genome sequence of Wuhan seafood market pneumonia virus is out !

Jit — Fri, 31 Jan 2020 02:36:59 -0600

Wuhan-Hu-1 claimed at least 40 lives and infected at least 1300 others in China. Cases are now being reported from Thailand, Singapore, Malaysia, South Korea, Japan, Vietnam, Nepal, France, Australia and even as far as the US. On Jan 10 2020, while news of the first fatality was barely trickling in, the 29,903 letters constituting the viral genome from an affected individual in Wuhan had already been elucidated (even though a few corrections were made subsequently). All the viral genome sequences from affected individuals are very very close to each other. Several are identical and none has more than 5 differences (99.983% similarity). This strongly suggests that transmission into humans came from a single pointed source and happened very recently, between Sep-Dec 2019.

Check out the detail at https://www.ncbi.nlm.nih.gov/nuccore/MN908947

BlobToolKit: A toolkit for genome assembly QC

Jit — Fri, 21 Feb 2020 00:17:50 -0600

Filtering raw genomic datasets is essential to avoid chimeric assemblies and to increase the validity of sequence-based biological inference. BlobToolKit extends the BlobTools1/Blobology2 approach to simplify interactive and reproducible filtering.

BlobToolKit is comprised of four components:

BlobToolKit Viewer allows browser-based interactive visualisation and filtering of preliminary or published genomic datasets even for highly fragmented assemblies.
BlobTools2 is a command-line program to convert assemblies and analysis results into datasets that can be further processed using BlobTools2 and/or visualised in the Viewer.
The BlobToolKit Specification features a formal schema and validator for the JSON-based BlobDir format used by BlobTools2 and the Viewer.
The BlobToolKit Pipeline is a configurable Snakemake pipeline that automates all steps from retrieving public datasets through running analyses and generating a BlobDir dataset with BlobTools2, ready for visualisation in the Viewer.

Paper https://www.biorxiv.org/content/10.1101/844852v1.full.pdf

Address of the bookmark: https://blobtoolkit.genomehubs.org/

Science for Life Laboratory (SciLifeLab)-Sweden

Sat, 10 May 2014 06:22:30 -0500

Science for Life Laboratory (SciLifeLab) is a national center for molecular biosciences with focus on health and environmental research. The center combines frontline technical expertise with advanced knowledge of translational medicine and molecular bioscience. SciLifeLab is a national resource and a collaboration between four universities: Karolinska Institutet, KTH Royal Institute of Technology, Stockholm University and Uppsala University.

Webpage : https://www.scilifelab.se/about-us/
Opportunity: https://www.scilifelab.se/about-us/career/

Phytozome v12.1: plant science community hub for accessing palnts genomic data

Surabhi Chaudhary — Tue, 17 Mar 2020 07:30:17 -0500

Phytozome, the Plant Comparative Genomics portal of the Department of Energy's Joint Genome Institute, provides JGI users and the broader plant science community a hub for accessing, visualizing and analyzing JGI-sequenced plant genomes, as well as selected genomes and datasets that have been sequenced elsewhere. As of release v12.1.6, Phytozome hosts 93 assembled and annotated genomes, from 82 Viridiplantae species. More than half of these genomes have been sequenced, assembled and/or annotated with JGI Plant Science program resources. By integrating this large collection of plant genomes into a single resource and performing comprehensive and uniform annotation and analyses, Phytozome facilitates accurate and insightful comparative genomics studies.

Address of the bookmark: https://phytozome.jgi.doe.gov/pz/portal.html

KAD: Assessing genome assemblies using K-mer copies in assemblies and K-mer abundance in Illumina reads

Jit — Fri, 19 Jun 2020 07:34:12 -0500

KAD is designed for evaluating the accuracy of nucleotide base quality of genome assemblies. Briefly, abundance of k-mers are quantified for both sequencing reads and assembly sequences. Comparison of the two values results in a single value per k-mer, K-mer Abundance Difference (KAD), which indicates how well the assembly matches read data for each k-mer.

where, c is the count of a k-mer from reads, m is the mode of counts of read k-mers, and n is the copy of the k-mer in the assembly.

Address of the bookmark: https://github.com/liu3zhenlab/KAD

Professor/Associate Professor/ Assistant Professor at Chettinad Academy of Research and Education

Sat, 24 May 2014 00:00:15 -0500

OPEN FACULTY POSITION

Chettinad Academy of Research and Education (CARE) invites applications from eligible and translational research-oriented candidates to the posts of Professor/Associate Professor/ Assistant Professor Computational Biology, Bioinformatics, and Pharmaceutical Chemistry.

Emoluments: As per UGC norms (Adequate Compensation for Postdoctoral/Teaching experience)

Candidates fulfilling the eligibility criteria as per the UGC norms can send their full CV with copies of certificates and reference letters to the following address by post or by e-mail on or before 31st May 2014

The Registrar,
Chettinad Academy of Research and Education,
Chettinad Health City
Kelambakkam, Chennai 603 103
Tamil Nadu
T +91 (0)44 4741 1000
F +91 (0)44 4741 1011
Email: jobs @chettinadhealthcity.com

Advertisement: http://182.73.176.163/chc/ads2014.pdf

Flanker

Rahul Nayak — Sat, 27 Feb 2021 22:04:53 -0600

Flanker, a Python package which performs alignment-free clustering of gene flanking sequences in a consistent format, allowing investigation of mobile genetic elements (MGEs) without prior knowledge of their structure. Flanker can be flexibly parameterised to finetune outputs by characterising upstream and downstream regions separately and investigating variable lengths of flanking sequence.

Address of the bookmark: https://github.com/wtmatlock/flanker

The Minerva Research Group for Bioinformatics

Tue, 27 May 2014 15:48:14 -0500

The focus of the bioinformatics group is to use computational approaches to gain an insight into genome evolution in primates.

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

IVA: accurate de novo assembly of RNA virus genomes

Neel — Wed, 23 Jun 2021 07:51:59 -0500

IVA (Iterative Virus Assembler) designed specifically for read pairs sequenced at highly variable depth from RNA virus samples. We tested IVA on datasets from 140 sequenced samples from human immunodeficiency virus-1 or influenza-virus-infected people and demonstrated that IVA outperforms all other virus de novo assemblers.

Availability and implementation: The software runs under Linux, has the GPLv3 licence and is freely available from http://sanger-pathogens.github.io/iva

https://pubmed.ncbi.nlm.nih.gov/25725497/

Address of the bookmark: https://github.com/sanger-pathogens/iva

Monitor running jobs on Linux server

Jitendra Narayan — Fri, 06 Jun 2014 16:18:43 -0500

You as a bioinformatican run lots of program on your servers. Sometime the shared server is also used by your colleague. If server is busy you sometime need to check the running programs and want to monitor the running programs as well. The "top" command will come in handy when you need to find out if things are still running, how long they’ve been running, or how much memory is being used.

‘top’ is very simple to run: type

%% top

You’ll get a screen that looks like this, and is updated regularly:

Simple, right? Heh.

First! Note that you can use ‘q’ or ‘CTRL-C’ to exit from ‘top’.

Now let’s read and understand at each line independently.

The first line:

top - 23:00:48 up 39 days, 2 user, load average: 0.00, 0.00, 0.00

The first line tells you the current time, how long the machine has been up, how many users are logged in, and the short/medium/long-term compute load on the machine. If you run something for a long time, you’ll see these numbers go up. Right now, the machine is basically just sitting there, so these are all close to 0.

The second line:

Tasks: 239 total,   1 running, 238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used, 14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
1 root      39 19 0 0 0 S 0.0 0.0   246:57.22 kipmi0
2 root      RT   0     0    0    0 S 0.0 0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...