Address of the bookmark: https://github.com/vpc-ccg/haslr

2. In some perl script I found this
 . . . . . .
 . . . . . .
# It works for me, only God understood how it is working
while (/(<\/[^>]+>)|(<[^>]+>)|(<[^>]+>)$|([^><]+)/go) {
            $startGene=$1;
            $beginChromosome=$2;
    
. . . . . .
 .. . . . . .
}

3. One more interesting message in Perl found …. It will must tickle you bone :)
open(my $fh, "<", "gene.txt")    or kill " Me if you think this is a mistake :$!";

4. From the Perl

  while () {  # "The Mothership Connection is here!"
    print “$_\n”; # Printing the offspring :)

5. Perl message
if ($1) { print “Just found a the error in chromosome !!!, yahoo…”; else { “That is not error, but mutation you moron!”;

6. One genome database curator walk in wine bar asked the bartender:
CREATE TABLE gene IF NOT EXISTS SexOnTheBeach;

To create single-genome plot by aligning genome data along all chromosomes of a single genome, go to the Single-genome plot menu.

To cretae two-genome plot for comparison of data across two genomes, go to the Two-genome plot menu.

For the detail format of input data, check the Input data format submenu of the Help menu.

shinyChromosome is deployed at http://150.109.59.144:3838/shinyChromosome/, http://shinyChromosome.ncpgr.cn, and https://yimingyu.shinyapps.io/shinyChromosome for online use. The source code and manual of shinyChromosome are freely available at https://github.com/venyao/shinyChromosome.

https://yimingyu.shinyapps.io/shinychromosome/

https://www.sciencedirect.com/science/article/pii/S1672022919301883

Address of the bookmark: https://yimingyu.shinyapps.io/shinychromosome/

Lab page: http://jarvislab.net/

Annotation

https://bigd.big.ac.cn/ncov/variation/annotation

Genome wharehouse 

https://bigd.big.ac.cn/gwh/browse/index

Released Genome

https://bigd.big.ac.cn/ncov/release_genome

Download data 

ftp://download.big.ac.cn/Genome/Viruses/Coronaviridae/

Raw data

https://bigd.big.ac.cn/gsa/browse/run/?tag=Coronaviridae

Address of the bookmark: https://bigd.big.ac.cn/ncov/about

Applications are invited on prescribed format along with self attested copies of the certificates for Faculty Positions in the following areas:
Sciences – Systems Biology, Computer Aided Drug Designing, Statistics, Applied Mathematics, Applied Physics. BioMedical Engineering – BioMechanics, BioMedical Instrumentation.

Last Date : May 10, 2014

Details are available on our website : http://www.iiita.ac.in

http://www.iiita.ac.in/downloads/announcements/uploads/FACULTY_Advertisement_NO-FS-01_2014130.pdf

More at https://www.biorxiv.org/content/10.1101/2020.03.15.992941v1.full

Address of the bookmark: https://github.com/marbl/merqury

Part I – Basic Find Commands for Finding Files with Names
1. Find Files Using Name in Current Directory

Find all the files whose name is gene.txt in a current working directory.

# find . -name gene.txt

./gene.txt

2. Find Files Under Home Directory

Find all the files under /home directory with name gene.txt.

# find /home -name gene.txt

/home/gene.txt

3. Find Files Using Name and Ignoring Case

Find all the files whose name is gene.txt and contains both capital and small letters in /home directory.

# find /home -iname gene.txt

./gene.txt
./Gene.txt

4. Find Directories Using Name

Find all directories whose name is Gene in / directory.

# find / -type d -name Gene

/Gene

5. Find fasta Files Using Name

Find all php files whose name is gene.fasta in a current working directory.

# find . -type f -name gene.fasta

./gene.fasta

6. Find all PHP Files in Directory

Find all fasta files in a directory.

# find . -type f -name "*.fasta"

./gene.fasta
./cancer.fasta
./allgene.fasta

Part II – Find Files Based on their Permissions
7. Find Files With 777 Permissions

Find all the files whose permissions are 777.

# find . -type f -perm 0777 -print

8. Find Files Without 777 Permissions

Find all the files without permission 777.

# find / -type f ! -perm 777

9. Find SGID Files with 644 Permissions

Find all the SGID bit files whose permissions set to 644.

# find / -perm 2644

10. Find Sticky Bit Files with 551 Permissions

Find all the Sticky Bit set files whose permission are 551.

# find / -perm 1551

11. Find SUID Files

Find all SUID set files.

# find / -perm /u=s

12. Find SGID Files

Find all SGID set files.

# find / -perm /g+s

13. Find Read Only Files

Find all Read Only files.

# find / -perm /u=r

14. Find Executable Files

Find all Executable files.

# find / -perm /a=x

15. Find Files with 777 Permissions and Chmod to 644

Find all 777 permission files and use chmod command to set permissions to 644.

# find / -type f -perm 0777 -print -exec chmod 644 {} \;

16. Find Directories with 777 Permissions and Chmod to 755

Find all 777 permission directories and use chmod command to set permissions to 755.

# find / -type d -perm 777 -print -exec chmod 755 {} \;

17. Find and remove single File

To find a single file called gene.txt and remove it.

# find . -type f -name "gene.txt" -exec rm -f {} \;

18. Find and remove Multiple File

To find and remove multiple files such as .fa or .gb, then use.

# find . -type f -name "*.fa" -exec rm -f {} \;

OR

# find . -type f -name "*.gb" -exec rm -f {} \;

19. Find all Empty Files

To file all empty files under certain path.

# find /tmp -type f -empty

20. Find all Empty Directories

To file all empty directories under certain path.

# find /tmp -type d -empty

21. File all Hidden Files

To find all hidden files, use below command.

# find /tmp -type f -name ".*"

Part III – Search Files Based On Owners and Groups
22. Find Single File Based on User

To find all or single file called gene.txt under / root directory of owner root.

# find / -user root -name gene.txt

23. Find all Files Based on User

To find all files that belongs to user Rahul under /home directory.

# find /home -user rahul

24. Find all Files Based on Group

To find all files that belongs to group Developer under /home directory.

# find /home -group developer

25. Find Particular Files of User

To find all .txt files of user Rahul under /home directory.

# find /home -user rahul -iname "*.txt"

Part IV – Find Files and Directories Based on Date and Time
26. Find Last 50 Days Modified Files

To find all the files which are modified 50 days back.

# find / -mtime 50

27. Find Last 50 Days Accessed Files

To find all the files which are accessed 50 days back.

# find / -atime 50

28. Find Last 50-100 Days Modified Files

To find all the files which are modified more than 50 days back and less than 100 days.

# find / -mtime +50 –mtime -100

29. Find Changed Files in Last 1 Hour

To find all the files which are changed in last 1 hour.

# find / -cmin -60

30. Find Modified Files in Last 1 Hour

To find all the files which are modified in last 1 hour.

# find / -mmin -60

31. Find Accessed Files in Last 1 Hour

To find all the files which are accessed in last 1 hour.

# find / -amin -60

Part V – Find Files and Directories Based on Size
32. Find 50MB Files

To find all 50MB files, use.

# find / -size 50M

33. Find Size between 50MB – 100MB

To find all the files which are greater than 50MB and less than 100MB.

# find / -size +50M -size -100M

34. Find and Delete 100MB Files

To find all 100MB files and delete them using one single command.

# find / -size +100M -exec rm -rf {} \;

35. Find Specific Files and Delete

Find all .gb files with more than 10MB and delete them using one single command.

# find / -type f -name *.gb -size +10M -exec rm {} \;

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Find more at http://www.imtech.res.in/raghava/