Address of the bookmark: https://www.biostarhandbook.com/

https://bioalgorithms.ucsd.edu/research4.html

Phone No. 0495 2731 410

WALK -IN- TEST CUM INTERVIEW
Walk- in- Test cum Interview (based on test) for the selection of Research Associate (Bioinformatics) & Bioinformatic Trainees under the scheme ‘Distributed Information Sub Centre- DISC’ will be held at this Institute as per details indicated below.

Research Associate
Date of Interview : 21 -01-2014 at 10.00 A.M
Qualifications :
a) Essential: Doctorate degree in Bioinformatics or Biotechnology/Life Sciences/Biochemistry with expertise in Bioinformatics as evidenced by publications.
OR Three years research experience after MVSc/MPharm/ME/MTech with Bioinformatics Specialization.
b Desirable: Experience in handling NGS data Programming skills in Python/Bioperl
Emoluments : Rs:22000/- per month + HRA (higher pay upto Rs.24000/- can be paid depending on the qualifications and experience.
Upper age limit : 40 years for Men & 45 years for Women as on date of Interview (Upper Age limits are relaxable for SC, ST and OBC candidates as per Govt. of India norms (at present 5 years for SC/ST and 3 years for OBC)
Duration of Project : Till the closure of the project.

General Terms and conditions
1. The above positions are purely on temporary basis and is co-terminus with the closure of the project. There is no provision of re-employment after termination of project.
The selected candidate will not have any right for claiming pay scale or absorption
against any regular post being vacant on a later date at this Institute.
2 . No TA/DA will be paid for attending the Interview.
3. Canvassing in any form will lead to cancellation of candidate.
4. The decision of Director, IISR would be final and binding in all aspects.
5. Candidates will not be permitted to enter the Examination Hall after 10.00 A.M.
6. Candidates who secure the minimum marks prescribed by the Institute in written test only will be eligible for calling for the interview. The number of candidates to be called for the interview will be decided by the Director of the Institute.
7 Those who do not possess original Degree/PG certificate or Provisional certificate will not be allowed to attend the Test/Interview.

Note: All relevant certificates (in original) and bio data, No objection certificate in case he/she is employed elsewhere and experience certificate in original (if any) need to be produced at the time of interview.
Advertisement: http://spicebioinfo.res.in/downloads/DISC-Website.pdf

In comparative genome analysis work, we usually compare more than two genomes and looks for syntenic regions amongst them. In my research I used Evolution Highway (RH) http://eh-demo.ncsa.uiuc.edu/, which is a collaborative project designed to provide a visual means for simultaneously comparing genomes of multiple amniote species. The tool removes the burden of manually aligning these maps and allows cognitive skills to be used toward something more valuable than preparation and transformation of data. In addition to EH, attractive Circos (http://circos.ca/) is also very popular for this kind of analysis.

The EH is available online, and can be easily access and use, whereas Circos installation is not entirely straightforward. One of the most difficult parts of the installation involves installing the GD library. Since there weren't good instructions for installing this library on the internet I decided to post instructions here in case they are useful to anyone else.

Following are the steps to install GD modules in Mac OS

1. Setup

Create a folder for the files:

$ mkdir -p /SourceCache
$ cd /SourceCache

Get and unpack the required Jpeg-6b and GD libraries:
Download Jpeg-6b (http://code.google.com/p/google-desktop-for-linux-mirror/downloads/detail?name=jpeg-6b.tar.gz&can=2&q)
Download GD (http://search.cpan.org/~lds/GD-2.46/)

Place the "tar.gz" files in "/SourceCache" and double click to unpack.

2. Install libjpeg

Copy the "config.sub" and "config.guess" files to "/SourceCache". Note that your "config.sub" and ""config.guess" files may be in a slightly different location. The commands below show where they were on my machine:

$ cd /SourceCache/jpeg-6b/src
$ cp /usr/share/libtool/config/config.sub .
$ cp /usr/share/libtool/config/config.guess .

Configure libjpeg as follows. Note that this was installed on a 64 bit machine. However, this method may configure it in a 32 bit format. This may not be the best way to configure the installation but it works.

$ .configure --enable-shared
$ make

Check to see if the following directories exist on your machine. Create the missing directories in the following manner:

$ mkdir -p /usr/local/include
$ mkdir -p /usr/local/bin
$ mkdir -p /usr/local/lib
$ mkdir -p /usr/local/man/man1

Finish making and installing libjpeg:

$ make install

3. Install GD

$ cd /SourceCache/GD-2.46/GD/
$ perl Makefile.PL
$ make
$ make test (optional)
$ make html (optional)
$ make install

Other way for Mac OS
The easiest way to get a lot of these is with a program called Fink, which is similar in nature to the CPAN installer, but installs common GNU utilities. Fink is available from <http://sourceforge.net/projects/fink/>.

Follow the instructions for setting up Fink. Once it's installed, you'll want to run the following as root: fink install gd

It will prompt you for a number of dependencies, type 'y' and hit enter to install all of the dependencies. Then watch it work.

To prevent creating conflicts with the software that Apple installs by default, Fink creates its own directory tree at /sw where it installs most of the software that it installs. This means your libraries and headers for libgd will be at /sw/lib and /sw/include instead of /usr/lib and /usr/local/include. Because of these changed locations for the libraries, the Perl GD module will not install directly via CPAN, because it looks for the specific paths instead of getting them from your environment. But there's a way around that :-)

Instead of typing "install GD" at the cpan> prompt, type look GD. This should go through the motions of downloading the latest version of the GD module, then it will open a shell and drop you into the build directory. Apply below patch to the Makefile.PL file (save the patch into a file and use the command patch < patchfile.)

Then, run these commands to finish the installation of the GD module:

perl Makefile.PL
make
make test
make install
And don't forget to run exit to get back to CPAN.

Install on MS Window, using PPM

C:\Documents and Settings\Owner>ppm
PPM interactive shell (2.2.0) - type 'help' for available commands.
PPM> install GD
Install package 'GD?' (y/N): y
Installing package 'GD'...
Downloading http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW. ...
Installing C:\Perl\site\lib\auto\GD\GD.bs
Installing C:\Perl\site\lib\auto\GD\GD.dll
Installing C:\Perl\site\lib\auto\GD\GD.exp
Installing C:\Perl\site\lib\auto\GD\GD.lib
Installing C:\Perl\html\site\lib\GD.html
Installing C:\Perl\site\lib\GD.pm
Installing C:\Perl\site\lib\qd.pl
Installing C:\Perl\site\lib\auto\GD\autosplit.ix
PPM>


If you can't install it from ppm. You can download it:
http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.


BTW,All Perl 5.6.1 Modules are located at:

http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

Install the Perl GD Module on Linux

$ sudo perl -MCPAN -e shell

Since it was the first time I had run this command on this particular machine I had to answer a lot of questions but simply selected the defaults for everything as this usually works for me. Once in the CPAN shell I entered

$ install Bundle::CPAN

and selected all of the defaults again. Once the CPAN bundle had finished installing I tried to install GD::Graph by typing

$ install GD::Graph

but it failed with hundreds of errors – the first of which was

GD.xs:7:16: error: gd.h: No such file or directory

This was fixed with the following apt-get command (in the bash shell)

$ sudo apt-get install libgd2-xpm-dev

back in the CPAN shell I still couldn’t get GD::Graph to build and I guessed this was because of some left over files from the failed build. I don’t know the command to clean things up inside the CPAN shell and am too lazy to read the docs so I simply went into the .cpan/build directory in my home directory and deleted anything that started with GD – eg

$ rm -rf GD-2.35-HC_vkB

$ rm -rf GDGraph-1.44-Evfibe

and so on. Those strings at the end (VkB and so on) look random so they might be different on your machine. Then I went back into the CPAN shell and ran

$ install GD::Graph

There were a few dependencies which the script fetched and installed for me but everything worked smoothly.

Manual and other Perl Module instalation are mentioned in my previous blog @ http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

Salary: £27,854 - £29,541, with progression to £36,298

You will perform cutting edge computational biology within the Faculty of Medical Sciences, with a particular focus on the Northern Institute for Cancer Research (NICR), and contribute to the delivery of Faculty wide programmes of training, analytical services and skill transfer between Faculty Institutes.

You will have a relevant first degree or equivalent qualifications and/or experience in a relevant scientific/technical role, together with previous specialist experience at a senior level in bioinformatics. A PhD is desirable.

This position is part of the Bioinformatics Support Unit but physically located for the majority of the time in the NICR buildings.

Tenable for three years.

Informal enquiries to unit head Dr Simon Cockell: 0191 222 7253; simon.cockell@ncl.ac.uk

For more information visit @ https://www15.i-grasp.com/fe/tpl_newcastle02.asp?s=4A515F4E5A565B1A&jobid=50667,2552984041&key=70203469&c=725434237887&pagestamp=sepghtjhowdqpsxuyn

You can also find several other jobs @http://bsu.ncl.ac.uk/support/recruitment/

Awards of $5 million to four grantees have been made in fiscal year 2013 under the Genomic Sequencing and Newborn Screening Disorders research program. The program will be funded at $25 million over five years, as funds are made available.

"Hundreds of US babies will be pioneers in genomic medicine through a US$25-million programme to sequence their genomes soon after they are born."

Source:

http://blogs.nature.com/news/2013/09/scientists-to-sequence-hundreds-of-newborns-genomes.html

http://www.genome.gov/27554919

Functioning of efflux systems in Gram-negative bacteria
Determinants of the compound-efflux system interactions
Action of inhibitors on efflux systems
Structural and dynamical features of the efflux systems

TatA
Assembly of the TatA system
Study of the dynamical features of the charge zipper

Methods
Setup of a kinetic Monte Carlo (KMC) scheme to study the flux of antibiotics through porins and efflux systems
Setup of protocol to integrate MD results in a ligand-based approach

Viral inhibitors
Interactions of selected compounds with RNA-dependent RNA polymerases (RdRps) of HCV and BVDV
Assessment of the role of mutations in RdRps
Antimicrobial peptides

Interactions of antimicrobial peptides with membranes: structure and dynamics
Interactions between antimicrobial peptides in the presence of different membranes
Protein-protein interactions
Effects of mutations

Lab Page
http://www.dsf.unica.it/~paolo/Site/Home.html

https://gold.jgi.doe.gov/

Address of the bookmark: https://gold.jgi.doe.gov/

Genome Annotation and Functional Genomics

Bergman Lab is actively engaged in the development and application of computational methods to improve the annotation of functional biological features in genome sequences. Bergman Lab work focuses on improving annotation of non-protein-coding regions of the genome including conserved noncoding sequences (CNSs), cis-regulatory modules (CRMs), transcription factor binding sites (TFBSs), transposable elements (TEs) and noncoding RNA (ncRNA) genes. Current projects include improving the (i) annotation of TEs in the fly and yeast genomes, (ii) annotation of CRMs and TFBSs in the fly genome, and (iii) analysis of transposon knockout collections in flies. Research in this area is supported by the EC FP7 programme.

Genome and Molecular Evolution
Text and Data Mining

More @ http://bergmanlab.smith.man.ac.uk/