Check out the detail at https://www.ncbi.nlm.nih.gov/nuccore/MN908947

Recruitment for Research Associate and Project Assistant positions

Regional Centre for Biotechnology (RCB) is an autonomous academic institution established by the Department of Biotechnology, Govt. of India with regional and global partnerships synergizing with the programmes of UNESCO as a Category II Centre. The primary focus of RCB is to provide world class education, training and conduct innovative research at the interface of multiple disciplines to create high quality human resource in disciplinary and interdisciplinary areas of biotechnology in a globally competitive research milieu.

Research Associate (02 Position)

Consolidated emoluments Rs.22000/- + 30% H.R.A. p.m.

Essential: Ph.D. in Natural Sciences, minimum 60% marks in all qualifying exams and below 35 years of age.

Desirable: Prior experience at the PhD level in Biochemistry, Bioinformatics and Proteomics with a strong motivation for a career in research is highly desirable.

Strong PhD level training with proteins chemistry, protein purification and statistical analysis of proteomics or genomics dataset will be preferred. Either/ both qualifications should be substantiated by published papers.

Inter-Institutional Program for Maternal, Neonatal and Infant Sciences: A translational approach to studying preterm birth.

Principal Investigator: Dr. Dinakar M. Salunke

Applicants may apply along with the requisite documents (attested copies) pertaining to proof of date of birth, academic/professional qualifications, experience (if any), in the prescribed format available on our websites: www.rcb.res.in and www.rcb.ac.in. Applications should be sent to the Registrar, Regional Centre for Biotechnology, 180 Udyog Vihar Phase 1, Gurgaon-122016, Haryana, India, through Registered Post on or before Feb 28, 2014. A soft copy of the application should be sent by email to registrar@rcb.res.in. Incomplete applications or applications received after Feb 28, 2014 will not be entertained.

More at https://www.rcb.res.in/Advt-1._for_websites_PTB-revised.pdf

BlobToolKit is comprised of four components:

1. BlobToolKit Viewer allows browser-based interactive visualisation and filtering of preliminary or published genomic datasets even for highly fragmented assemblies.
2. BlobTools2 is a command-line program to convert assemblies and analysis results into datasets that can be further processed using BlobTools2 and/or visualised in the Viewer.
3. The BlobToolKit Specification features a formal schema and validator for the JSON-based BlobDir format used by BlobTools2 and the Viewer.
4. The BlobToolKit Pipeline is a configurable Snakemake pipeline that automates all steps from retrieving public datasets through running analyses and generating a BlobDir dataset with BlobTools2, ready for visualisation in the Viewer.

Paper https://www.biorxiv.org/content/10.1101/844852v1.full.pdf

Address of the bookmark: https://blobtoolkit.genomehubs.org/

Address of the bookmark: https://phytozome.jgi.doe.gov/pz/portal.html

Applications are invited for the posts of one Junior Research Fellow in the DBT funded project entitled “Plant parasitic nematode genome informatics - insilico resource development”. The project is for a period of three years.

Essential qualifications for JRF: First class M. Sc. / M. Tech in Bioinformatics. Knowledge of programming language, pearl, Statistics and database – HTML, CSS, Java script.

Desirable qualifications: Experience in handling next generation sequencing data

Age limit: 35 years maximum (5 year relaxation for SC/ST and women candidates) Emoluments: 16,000 + 30% HRA.

The post is purely temporary in nature and is co-terminus with the project. The appointment would be initially for one year and may be extended further upon satisfactory performance.

Those who are interested in pursuing Ph.D with strong research aptitude are preferred.

Interested candidates may attend the Walk in interview on 25th March 2014 along with the duly filled application forms (format in the following page) with all the relevant documents.

Venue: Division of Nematology, Indian Agricultural Research Institute, New Delhi 110012 (Room No. 306, 3rd floor, LBS building)

Reporting Time: Interested candidates should report strictly between 10.00 to 10.30 AM.

Interview time: 10.30 AM

Short-listed candidates will be called for interview at New Delhi. However, no TA and DA will be paid for attending the interview.

Advertisement:

https://www.iari.res.in/files/JRF_Nema-07032014-20140307-170017.pdf

More at https://www.biorxiv.org/content/10.1101/2020.03.15.992941v1.full

Address of the bookmark: https://github.com/marbl/merqury

is a state-funded virtual research center aimed at promoting imaging and informatics research infrastructure in South Dakota. BioSNTR research foci include analysis of large-scale genomics and imaging data, application of novel microscopy technologies to study signaling pathways, and identification of new compounds to manipulate signaling pathways.
Responsibilities: This person will be part of Plant Science team with research focus in bioinformatic and molecular network analyses of high throughput data (transcriptomic, proteomic, metabolomics, miRNA). The individual will be integrated into functional genomic projects encompassing grapevine dormancy and freezing tolerance (Fennell) and regulation of soybean nodulation (Subramanian). The successful candidate will perform computational analysis of high throughput, next-generation sequence data and possess the ability to use bioinformatics analytical tools on HPC clusters.

Required Qualifications:
• Ph.D. in plant computational biology or bioinformatics.
• Experience in a high performance computing environment.
• Perl, Python and Java programming experience
• Data management and database development experience

Desired Qualifications:
• Parallel computing experience
• Experience working in a multidisciplinary environment

Contact Information
South Dakota State University
Plant Science
Anne Fennell
anne.fennell@sdstate.edu
Tel. Number: 605-688-6373
http://www.biosntr.org

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

In our day to day research activity, we need to securely copy our data from several to local computer and visa-versa. I am jotting down some of the commonly used SCP command for your future help. Hope you all will like it

What is Secure Copy?

scp allows files to be copied to, from, or between different hosts. It uses ssh for data transfer and provides the same authentication and same level of security as ssh.

Examples

Copy the file "gene.txt" from a remote host to the local host

    $ scp your_username@remotehost.edu:gene.txt /some/local/directory

Copy the file "foobar.txt" from the local host to a remote host

    $ scp gene.txt your_username@remotehost.edu:/some/remote/directory

Copy the directory "chromosome" from the local host to a remote host's directory "bar"

    $ scp -r chromosome your_username@remotehost.edu:/some/remote/directory/bar

Copy the file "gene.txt" from remote host "rh1.edu" to remote host "rh2.edu"

    $ scp your_username@rh1.edu:/some/remote/directory/gene.txt \
    your_username@rh2.edu:/some/remote/directory/

Copying the files "gene.txt" and "cancer.txt" from the local host to your home directory on the remote host

    $ scp gene.txt cancer.txt your_username@remotehost.edu:~

Copy the file "gene.txt" from the local host to a remote host using port 2264

    $ scp -P 2264 gene.txt your_username@remotehost.edu:/some/remote/directory

Copy multiple files from the remote host to your current directory on the local host

    $ scp your_username@remotehost.edu:/some/remote/directory/\{a,b,c\} .

    $ scp your_username@remotehost.edu:~/\{gene.txt,cancer.txt\} .

scp Performance

By default scp uses the Triple-DES cipher to encrypt the data being sent. Using the Blowfish cipher has been shown to increase speed. This can be done by using option -c blowfish in the command line.

    $ scp -c blowfish some_file your_username@remotehost.edu:~

It is often suggested that the -C option for compression should also be used to increase speed. The effect of compression, however, will only significantly increase speed if your connection is very slow. Otherwise it may just be adding extra burden to the CPU. An example of using blowfish and compression:

    $ scp -c blowfish -C local_file your_username@remotehost.edu:~

Address of the bookmark: https://training.galaxyproject.org/training-material/topics/variant-analysis/tutorials/non-dip/tutorial.html