The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

http://en.wikipedia.org/wiki/Sequence_assembly 

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0951-y

Address of the bookmark: https://sourceforge.net/projects/operasf/

A research fellowship is available at the BioComputing Laboratory, University of Padova (URL: http://protein.bio.unipd.it/). A highly motivated and creative candidate is sought to work on structural bioinformatics. Specifically, the project entails the development of novel methods, tools and databases for the analysis of protein structures. The BioComputing Laboratory is a group of a dozen people working on several aspects of prediction of protein structure & function employing techniques at the intersection between biology, medicine, chemistry, physics & computer science. Our aim is to integrate the development of novel methods and their application to biologically relevant problems. We are looking for candidates with a solid Bioinformatics background, programming experience (Python, Perl, C++ and/or Java) and good knowledge of molecular biology (protein structure/function, signalling pathways). Candidates should have a degree with top marks, optionally hold a PhD, and be highly motivated to work on interdisciplinary research. Good knowledge of English, an open-minded spirit, being collaborative and creative are crucial. The fellowship, which should start in late 2013, is initially for one year. It will be commensurate to experience, can be extended depending on performance and may lead to a PhD degree. The successful candidate will be located at the BioComputing Laboratory, University of Padova. Travel support for conferences and/or research visits abroad may be provided. To apply, please send your CV, a brief description of your research background and the names of two (or more) references to Prof. Silvio Tosatto (Email: silvio.tosatto@unipd.it).

Contact Person (Referent): Silvio Tosatto
Ref. E-Mail: silvio.tosatto@unipd.it
Tel: +39 049 827 6269
Fax: +39 049 827 6260
Group Web Page: http://protein.bio.unipd.it/

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Job Description:F.No.11/10(1)/929 Qualifications: Candidates should have Ph.D. degree. If Ph.D. candidates are not available at least Post Graduate degree with GATE/NET qualification is a must. Walk-in-Interview on 19.12.2013 at 2.30 P.M. to 5.30 P.M .. at Maulana Azad National Institute of Technology: Bhopal For more details,please visit website:http://www.manit.ac.in/manitbhopal/Year2013/Recruitment/Contract_faculty/contract%20faculty%202013-2014.pdf

For more @ http://www.manit.ac.in/manitbhopal/Year2013/Recruitment/Contract_faculty/contract%20faculty%202013-2014.pdf

Web address @ :http://www.manit.ac.in

Address of the bookmark: https://github.com/dentearl/evolverSimControl

Yau Group develops statistical and computational methods for the analysis of genomic datasets with a particular interest in cancer sequencing applications and the use of Bayesian Statistics.

Yau Group are currently have projects in somatic mutation analysis of heterogeneous cancers, data fusion or integration techniques and single cell genomics.

More @ http://www.well.ox.ac.uk/~cyau/index.html

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4.  BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin

No. of Posts and Specialization: 1(UR)

Educational Qualification:

(i) Good academic record with a Ph.D. Degree in the concerned /allied /relevant disciplines.

(ii) The Ph.D. Degree shall be a mandatory qualification for all candidates to be appointed as Associate Professor through direct recruitment.

(iii) A Master‟s Degree with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed).

(iv) A minimum of eight years of experience of teaching and /or research in an academic /research position equivalent to that of Assistant Professor in a University, College or Accredited Research Institution/Industry excluding the period of Ph.D research with evidence of published work and a minimum of 5 publications as books and /or research papers in refereed journals only/policy papers.

(v) Contribution to educations innovation, design of new curricula and courses and technology-mediated teaching learning process with evidence of having guided doctoral candidates and research students.

(vi) A minimum score as stipulated in the Academic Performance Indicator (API) based performance Based Appraisal System (PBAS), set out in this notification in as mentioned in the advertisement.

Send your application to the A.R (Estt.Teaching), M.D.University, Rohtak on or before December 23, 2013.

For more details: http://www.mdurohtak.ac.in/pdf/Notices_Pdf/new_notice/Teaching%20Vacancy%20%28ADVT.%20No.%20PR-54%20of%202013%29.pdf

Last Apply Date: 23 Dec 2013