Reference: 

http://cbsu.tc.cornell.edu/lab/doc/assembly_workshop_20150420_lecture1.pdf

Note that since the original publication, we have made significant changes to OPERA (v1.0 onwards) including refinements to its basic algorithm (to reduce local errors, improve efficiency etc.) and incorporated features that are important for scaffolding large genomes (multi-library support, better repeat-handling etc.), in addition to other scalability and usability improvements (bam and gzip support, smaller memory footprint). We therefore encourage you to download and use our latest version: OPERA-LG. In our benchmarks, it has significantly improved corrected N50 and reduced the number of scaffolding errors. Furthermore, our latest release contains the wrapper script OPERA-long-read that enables scaffolding with long-reads from third-generation sequencing technologies (PacBio or Oxford Nanopore). The manuscript describing the new features and algorithms is available at Genome Biology. We look forward to getting your feedback to improve it further.

Address of the bookmark: https://sourceforge.net/p/operasf/wiki/The%20OPERA%20wiki/

More at http://biorxiv.org/content/early/2016/09/21/076463 

Address of the bookmark: http://shinyheatmap.com/

Targeted bait capture is a technique for sequencing many loci simultaneously based on bait sequences. HybPiper pipeline starts with high-throughput sequencing reads (for example from Illumina MiSeq), and assigns them to target genes using BLASTx or BWA. The reads are distributed to separate directories, where they are assembled separately using SPAdes. The main output is a FASTA file of the (in frame) CDS portion of the sample for each target region, and a separate file with the translated protein sequence.

HybPiper also includes post-processing scripts, run after the main pipeline, to also extract the intronic regions flanking each exon, investigate putative paralogs, and calculate sequencing depth. For more information, please see our wiki.

HybPiper is run separately for each sample (single or paired-end sequence reads). When HybPiper generates sequence files from the reads, it does so in a standardized directory hierarchy. Many of the post-processing scripts rely on this directory hierarchy, so do not modify it after running the initial pipeline. It is a good idea to run the pipeline for each sample from the same directory. You will end up with one directory per run of HybPiper, and some of the later scripts take advantage of this predictable directory structure.

Address of the bookmark: https://github.com/mossmatters/HybPiper

More at

https://github.com/jts/sga

SGA dependencies:
-google sparse hash library (http://code.google.com/p/google-sparsehash/)
-the bamtools library (https://github.com/pezmaster31/bamtools)
-zlib (http://www.zlib.net/)
-(optional but suggested) the jemalloc memory allocator (http://www.canonware.com/jemalloc/download.html)

Address of the bookmark: https://github.com/jts/sga

MeGAMerge (A tool to merge assembled contigs, long reads from metagenomic sequencing runs)

Description

MeGAMerge is a perl based wrapper/tool that can accept any number of sequence (FASTA) files containing assembled contigs of any length in Multi-FASTA format to produce an improved contig set based on OLC based assembly. All overlap parameters (Minimum Overlap Length, Identity, etc) are user-declarable at runtime. It is written to run on Linux.

Requirements:

You will need to have the following tools installed and in $PATH, or added to $binpath in the tool:

Newbler (specifically runAssembly)
Minimus2 (part of AMOS, also requires MUMmer)

Address of the bookmark: https://github.com/LANL-Bioinformatics/MeGAMerge

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

• Uncover missing heritability linked to structural variation
• Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
• Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled! 

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool 

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

• Unified variant calling user interface with built-in cluster compute support
• Small indel calling (2-49 bp)
• Improved inversion calling (screenInversions)
• Quality metric for SV calls based on number of local assemblies supporting each call
• Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
• Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Using the reference sequence dictionary (*.dict), it also creates some empty BAM files if no sam record was found for a chromosome. A pair of 'mock' SAM-Records can also be added to those empty BAMs to avoid some tools (like samtools) to crash.

Usage

java -jar splitbam.jar -p OUT/__CHROM__/__CHROM__.bam -R ref.fasta (bam|sam|stdin)

Options

• -h help; This screen.
• -R (indexed reference file) REQUIRED.
• -u (unmapped chromosome name): default:Unmapped
• -e | --empty : generate EMPTY bams for chromosome having no read mapped
• -m | --mock : if option '-e', add a mock pair of sam records to the empty bam
• -p (output file/bam pattern) REQUIRED. MUST contain __CHROM__ and end with .bam
• -s assume input is sorted.
• -x | --index create index.
• -t | --tmp (dir) tmp file directory
• -G (file) chrom-group file (see below)

Address of the bookmark: https://code.google.com/archive/p/jvarkit/wikis/SplitBam.wiki

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

Genome sequences of rare, uncultured bacteria obtained by differential coverage binning of multiple metagenomes

Mads Albertsen, Philip Hugenholtz, Adam Skarshewski, Gene W. Tyson, Kåre L. Nielsen and Per .H. Nielsen

Nature Biotechnology 2013, doi: 10.1038/nbt.2579

See the associated online guide for detailed information.

https://github.com/MadsAlbertsen/multi-metagenome

Address of the bookmark: https://github.com/MadsAlbertsen/multi-metagenome