BOL: Related items

XAMPP: Starting Apache fail Ubuntu

Ram Yash Pal — Sat, 07 Jun 2014 05:52:35 -0500

Once you install XAMMP on linux, the most common problem you face is Apache failure. To fix the issues please use following command to first stop and then again start it.

sudo /etc/init.d/apache2 stop

sudo /etc/init.d/mysql stop

sudo /etc/init.d/proftpd stop

sudo /opt/lampp/lampp start

PhpMyAdmin “Wrong permissions on configuration file, should not be world writable!”

Once the Xammp is installed, it might be possible to set up the configuration file in writable mode. Try the following steps:

Just chmod 0755 the file

sudo chmod 0755 config.inc.php

List of genome announcement, notes and reporting journals

Jit — Wed, 26 Jul 2017 08:01:38 -0500

Faced with an increasing number of articles describing DNA data and a need for more appropriate venues to present these data, some publishers and journals have responded by changing the structure and format of genome papers. Specifically, certain journals have started accepting very short manuscripts (500–1500 words) that present a new chromosome sequence, its GenBank accession number and little else. These pint-sized articles go by various names, such as genome reports, genome announcements, genome notes or genome letters, but will be referred to here broadly as genome reports. Their short length and minimal number (or complete absence) of figures, tables and article subheadings are a significant departure from long-form genome papers, which typically span 8–10 journal pages, contain many supporting items and have formal introduction, methods, results and discussion sections.

Following are the list of journals publishing pint-sized articles go by various names, such as genome reports, genome announcements, genome notes or genome letters, but will be referred to here broadly as genome reports.

1. Genome Announcements, American Society for Microbiology, Genome announcement, Impact factor 1.3, A 500-word report stating that the genome of a particular organism (prokaryote, eukaryote or virus) has been sequenced and providing a citable record of the corresponding GenBank submission. Must include abstract but no text headings can be used except for ‘Acknowledgments’ and ‘References’. Cannot include figures, tables or supplemental material to present data or analysis.

Link: https://mra.asm.org/

2. Genome Biology and Evolution, Oxford University Press, Genome report, Impact factor 4.2, Focused 1500-word papers (up to six tables or figures) that publish the main evolutionary message of new genome sequences as they become submitted to GenBank. May also contain specifically focused comparative analyses of previously published genomes that contain a substantial and novel insight of broadest evolutionary significance.

Link: https://academic.oup.com/gbe

3. Journal of Biotechnology, Elsevier, Genome announcement, Impact factor 2.9, A 500-word report announcing the availability of the completely annotated genome sequence of a biotechnologically relevant organism in the corresponding database (for eukaryotes, advanced draft genomes will also be considered). Articles can contain an Abstract, a brief report on the organism and its biotechnological relevance, a table summarizing the genome features, References and an Acknowledgement. Figures are generally not allowed.

Link: https://www.journals.elsevier.com/journal-of-biotechnology

4. Journal of Genomics, Ivyspring, Genome note, Impact factor N/A, A 1000-word report (10 reference limit; conclusions not permitted) describing novel data sets from high-throughput analysis of genotypes, phenotypes, gene expression, metabolomes, proteomes or genome assemblies.Standard metrics for data quality and the experimental design must be clearly reported.

Link: http://www.jgenomics.com/

5. Memórias do Instituto, Oswaldo Cruz Oswaldo Cruz Foundation, Genome announcement and highlight, Impact factor 1.6, Dedicated to publishing new genome information from eukaryote parasites, virus, bacteria and their respective vectors, as well as re-sequencing or comparative genome analyses. Should occupy no more than three printed pages including figures and/or tables.

Link: http://memorias.ioc.fiocruz.br/

6. Molecular Ecology Resources, Wiley, Genomic resources note, Impact factor 3.7, Short notes on newly assembled and annotated transcriptomes, genome fractions or whole genomes, and/or a library of SNP/SSR markers.Authors submit a short manuscript describing how the resource was developed and where the data can be accessed. Do not appear in journal as individual papers but are instead published as part of a summary article.

Link: https://onlinelibrary.wiley.com/journal/17550998

7. Standards in Genomic Science, BioMed Central (Springer), Short genome report, Impact factor 3.2, Short (∼500-word) article on newly sequenced genome. Article format must follow guidelines and template (available from journal Web site) put forward by the SGS. Any manuscripts not using template or that are missing key figures, tables and/or references (as per the guidelines) will be returned to authors. Rationale of the content model is to provide information that is consistently and uniformly presented for rapid and easy consumption by both human and machine readers.

Link: https://standardsingenomics.biomedcentral.com/

8. 3biotech, Springer, Short genome report, Impact factor 1.3, Short (∼500-word) article on newly sequenced genome. Article format must follow guidelines (available from journal Web site). Genome of a particular organism (prokaryote, eukaryote or virus) has been sequenced and providing a citable record of the corresponding GenBank submission.

Link: https://link.springer.com/journal/13205

Faculty Positions at Central University of Punjab

Mon, 07 Jul 2014 23:33:33 -0500

Faculty Positions: Rolling/Open Advertisement Advt.No: T-10 (2013)

Pay Scale: Pay Band Rs.15600-39100 with AGP of Rs.6,000/-

Essential Qualifications for Professors, Associate Professors, and Assistant Professors: As per “UGC REGULATIONS ON MINIMUM QUALIFICATIONS FOR APPOINTMENT OF TEACHERS AND OTHER ACADEMIC STAFF IN UNIVERSITIES AND COLLEGES AND MEASURES FOR THE MAINTENANCE OF STANDARDS IN HIGHER EDUCATION 2010“ and the 2nd Amendments to the regulation issued in June 2013.

For details: http://www.ugc.ac.in/oldpdf/regulations/revised_finalugcregulationfinal10.pdf http://www.ugc.ac.in/pdfnews/8539300_English.pdf and University rules.

Procedure to apply:

Application forms along with API form complete in all respect along with necessary documents and application fee of Rs. 500/-. (Rs. 250/- for Scheduled Caste/Scheduled Tribe/Person with disabilities) should be sent to:

Registrar, Central University of Punjab, City Campus, Mansa Road, Bathinda-151001

For more info visit: http://www.centralunipunjab.com/Teaching/Final%20Details-t10-2013.pdf, http://www.centralunipunjab.com/Teaching/Advertisement-t10-2013.jpg

Last Apply Date: 31 Dec 2014

GMOL: An Interactive Tool for 3D Genome Structure Visualization

Jit — Wed, 21 Mar 2018 12:25:20 -0500

GMOL was developed based upon our multi-scale approach that allows a user to scale between six separate levels within the genome. With GMOL, a user can choose any unit at any scale and scale it up or down to visualize its structure and retrieve corresponding genome sequences.

Address of the bookmark: https://www.nature.com/articles/srep20802

GMcloser: closing gaps in assemblies accurately with a likelihood-based selection of contig or long-read alignments

Shruti Paniwala — Mon, 11 Jun 2018 05:43:44 -0500

GMcloser uses likelihood-based classifiers calculated from the alignment statistics between scaffolds, contigs and paired-end reads to correctly assign contigs or long reads to gap regions of scaffolds, thereby achieving accurate and efficient gap closure. We demonstrate with sequencing data from various organisms that the gap-closing accuracy of GMcloser is 3–100-fold higher than those of other available tools, with similar efficiency. https://academic.oup.com/bioinformatics/article/31/23/3733/209212

Address of the bookmark: https://academic.oup.com/bioinformatics/article/31/23/3733/209212

National Center for Bioinformatics (NCB)

Wed, 23 Jul 2014 14:10:49 -0500

NCB is offering M.Phil and Ph.D programs in the area of Bioinformatics. The major goal of NCB is to promote quality training and research in the area of Bioinformatics. Bioinformatics originated as a cross-disciplinary field as the need for computational sections to research problem raised in biomedicine.

More at http://ncb.qau.edu.pk/

PhD opportunity at Université de Liège - Belgium

Sat, 02 Aug 2014 01:12:43 -0500

PhD opportunity at Université de Liège - Belgium

The Bioinformatics and Systems Biology Unit of Université de Liège (Belgium) is looking for a highly motivated master student with programming skills for a PhD thesis project (4 years, fully funded) with the goal of designing computational tools that use literature, genomic and structural data in order to infer regulatory and metabolic networks.

Applicants are invited to send their resume and a recommendation letter to Prof. Patrick Meyer (more details at www.biosys.ulg.ac.be )

For more information : www.biosys.ulg.ac.be

MEGADOCK 4.0

Suleman Khan — Thu, 07 Aug 2014 18:08:54 -0500

An ultra–high-performance protein–protein docking software for heterogeneous supercomputers

Summary: The application of protein–protein docking in large-scale interactome analysis is a major challenge in structural bioinformatics and requires huge computing resources. In this work, we present MEGADOCK 4.0, an FFT-based docking software that makes extensive use of recent heterogeneous supercomputers and shows powerful, scalable performance of over 97% strong scaling.

Availability and Implementation: MEGADOCK 4.0 is written in C++ with OpenMPI and NVIDIA CUDA 5.0 (or later) and is freely available to all academic and non-profit users at: http://www.bi.cs.titech.ac.jp/megadock.

Contact: akiyama@cs.titech.ac.jp

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/08/06/bioinformatics.btu532.short

Genome sequence-based (sub-)species delineation.

Abhimanyu Singh — Wed, 12 Dec 2018 08:31:14 -0600

The GGDC web service reports digital DDH for a universal and accurate delineation of prokaryotic (sub-)species without inheriting the pitfalls of classic DDH, and also calculates differences in genomic G+C content.

http://ggdc.dsmz.de/ggdc_background.php#

Genome-to-Genome Distance Calculator 2.1

http://ggdc.dsmz.de/ggdc.php

Address of the bookmark: http://ggdc.dsmz.de/

GrapheR !!!

John Parker — Thu, 14 Aug 2014 14:02:17 -0500

What a wonderful gem GrapheR is.... Oh yes it is. GrapheR is a GUI for base graphics in R by http://www.maximeherve.com/. The package provides a graphical user interface for creating base charts in R. It is ideal for beginners in R, as the user interface is very clear and the code is written along side into a text file, allowing users to recreate the charts directly in the console.

Adding and changing legends? Messing around with the plotting window settings? It is much easier/quicker with this GUI than reading the help file and trying to understand the various parameters.
Here is a little example using the iris data set.

library(GrapheR)
data(iris)
run.GrapheR()

This will bring up a window that helps me to create the chart and tweak the various parameters.

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!