BOL: Related items

TEannot

Jit — Thu, 18 Aug 2016 10:02:03 -0500

We advise to run first the TEdenovo pipeline but it is not compulsory. We suppose you begin by running the TEannot pipeline on the example provided in the directory "db/" rather than directly on your own genomic sequences. Thus, from now on, the project name is "DmelChr4".

Address of the bookmark: https://urgi.versailles.inra.fr/Tools/REPET/TEannot-tuto

LUMPY

Shruti Paniwala — Thu, 25 Aug 2016 08:05:02 -0500

A probabilistic framework for structural variant discovery.

Ryan M Layer, Colby Chiang, Aaron R Quinlan, and Ira M Hall. 2014. "LUMPY: a Probabilistic Framework for Structural Variant Discovery." Genome Biology 15 (6): R84. doi:10.1186/gb-2014-15-6-r84.

More at https://github.com/arq5x/lumpy-sv

Address of the bookmark: https://github.com/arq5x/lumpy-sv

Ka, Ks and Ka/Ks calculations

Poonam Mahapatra — Mon, 29 Aug 2016 11:44:11 -0500

gKaKs is a codon-based genome-level Ka/Ks computation pipeline developed and based on programs from four widely used packages: BLAT, BLASTALL (including bl2seq, formatdb and fastacmd), PAML (including codeml and yn00) and KaKs_Calculator (including 10 substitution rate estimation methods). gKaKs can automatically detect and eliminate frameshift mutations and premature stop codons to compute the substitution rates (Ka, Ks and Ka/Ks) between a well-annotated genome and a non-annotated genome or even a poorly assembled scaffold dataset. It is especially useful for newly sequenced genomes that have not been well annotated.

Look for KaKs calculation:

https://github.com/fumba/kaks-calculator

http://longlab.uchicago.edu/?q=gKaKs

http://www.ncbi.nlm.nih.gov/pubmed/23314322

Address of the bookmark: http://longlab.uchicago.edu/?q=gKaKs

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

Assembly tutorial PPT

Jit — Wed, 07 Sep 2016 03:12:53 -0500

Saved Cornell University assembly workshop PPT.

Reference:

http://cbsu.tc.cornell.edu/lab/doc/assembly_workshop_20150420_lecture1.pdf

OPERA : Optimal Paired-End Read Assembler

Jit — Fri, 09 Sep 2016 05:28:58 -0500

OPERA (Optimal Paired-End Read Assembler) is a sequence assembly program (http://en.wikipedia.org/wiki/Sequence_assembly). It uses information from paired-end/mate-pair/long reads to order and orient the intermediate contigs/scaffolds assembled in a genome assembly project, in a process known as Scaffolding. OPERA is based on an exact algorithm that is guaranteed to minimize the discordance of scaffolds with the information provided by the paired-end/mate-pair/long reads (for further details see Gao et al, 2011).

Note that since the original publication, we have made significant changes to OPERA (v1.0 onwards) including refinements to its basic algorithm (to reduce local errors, improve efficiency etc.) and incorporated features that are important for scaffolding large genomes (multi-library support, better repeat-handling etc.), in addition to other scalability and usability improvements (bam and gzip support, smaller memory footprint). We therefore encourage you to download and use our latest version: OPERA-LG. In our benchmarks, it has significantly improved corrected N50 and reduced the number of scaffolding errors. Furthermore, our latest release contains the wrapper script OPERA-long-read that enables scaffolding with long-reads from third-generation sequencing technologies (PacBio or Oxford Nanopore). The manuscript describing the new features and algorithms is available at Genome Biology. We look forward to getting your feedback to improve it further.

Address of the bookmark: https://sourceforge.net/p/operasf/wiki/The%20OPERA%20wiki/

Ribbon !!

Jit — Fri, 21 Oct 2016 04:54:30 -0500

Visualization has played an extremely important role in the current genomic revolution to inspect and understand variants, expression patterns, evolutionary changes, and a number of other relationships. However, most of the information in read-to-reference or genome-genome alignments is lost for structural variations in the one-dimensional views of most genome browsers showing only reference coordinates. Instead, structural variations captured by long reads or assembled contigs often need more context to understand, including alignments and other genomic information from multiple chromosomes. We have addressed this problem by creating Ribbon (genomeribbon.com) an interactive online visualization tool that displays alignments along both reference and query sequences, along with any associated variant calls in the sample. This way Ribbon shows patterns in alignments of many reads across multiple chromosomes, while allowing detailed inspection of individual reads (Supplementary Note 1). For example, here we show a gene fusion in the SK-BR-3 breast cancer cell line linking the genes CYTH1 and EIF3H. While it has been found in the transcriptome previously, genome sequencing did not identify a direct chromosomal fusion between these two genes. After SMRT sequencing, Ribbon shows that there are indeed long reads that span from one gene to the other, going through not one but two variants, for the first time showing the genomic link between these two genes (Figure 1a). More gene fusions of this cancer cell line are investigated in Supplementary Note 2. Figure 1b shows another complex event in this sample made simple in Ribbon: the translocation of a 4.4 kb sequence deleted from chr19 and inserted into chr16 (Figure 1b). Thus, Ribbon enables understanding of complex variants, and it may also help in the detection of sequencing and sample preparation issues, testing of aligners and variant-callers, and rapid curation of structural variant candidates (Supplementary Note 3). In addition to SAM and BAM files with long, short, or paired-end reads, Ribbon can also load coordinate files from whole genome aligners such as MUMmer. Therefore, Ribbon can be used to test assembly algorithms or inspect the similarity between species. Supplementary Note 4 shows a comparison of gorilla and human genomes using Ribbon, highlighting major structural differences. In conclusion, Ribbon is a powerful interactive web tool for viewing complex genomic alignments.

Script at https://github.com/MariaNattestad/ribbon

Address of the bookmark: http://genomeribbon.com/

HybPiper

Jit — Fri, 04 Nov 2016 05:02:10 -0500

HybPiper was designed for targeted sequence capture, in which DNA sequencing libraries are enriched for gene regions of interest, especially for phylogenetics. HybPiper is a suite of Python scripts that wrap and connect bioinformatics tools in order to extract target sequences from high-throughput DNA sequencing reads.

Targeted bait capture is a technique for sequencing many loci simultaneously based on bait sequences. HybPiper pipeline starts with high-throughput sequencing reads (for example from Illumina MiSeq), and assigns them to target genes using BLASTx or BWA. The reads are distributed to separate directories, where they are assembled separately using SPAdes. The main output is a FASTA file of the (in frame) CDS portion of the sample for each target region, and a separate file with the translated protein sequence.

HybPiper also includes post-processing scripts, run after the main pipeline, to also extract the intronic regions flanking each exon, investigate putative paralogs, and calculate sequencing depth. For more information, please see our wiki.

HybPiper is run separately for each sample (single or paired-end sequence reads). When HybPiper generates sequence files from the reads, it does so in a standardized directory hierarchy. Many of the post-processing scripts rely on this directory hierarchy, so do not modify it after running the initial pipeline. It is a good idea to run the pipeline for each sample from the same directory. You will end up with one directory per run of HybPiper, and some of the later scripts take advantage of this predictable directory structure.

Address of the bookmark: https://github.com/mossmatters/HybPiper

SGA: String Graph Assembler

Jit — Thu, 08 Dec 2016 05:08:59 -0600

SGA is a de novo genome assembler based on the concept of string graphs. The major goal of SGA is to be very memory efficient, which is achieved by using a compressed representation of DNA sequence reads.

More at

https://github.com/jts/sga

SGA dependencies:
-google sparse hash library (http://code.google.com/p/google-sparsehash/)
-the bamtools library (https://github.com/pezmaster31/bamtools)
-zlib (http://www.zlib.net/)
-(optional but suggested) the jemalloc memory allocator (http://www.canonware.com/jemalloc/download.html)

Address of the bookmark: https://github.com/jts/sga

MeGAMerge: A tool to merge assembled contigs, long reads from metagenomic sequencing runs

Jit — Mon, 19 Dec 2016 09:42:15 -0600

MeGAMerge

MeGAMerge (A tool to merge assembled contigs, long reads from metagenomic sequencing runs)

Description

MeGAMerge is a perl based wrapper/tool that can accept any number of sequence (FASTA) files containing assembled contigs of any length in Multi-FASTA format to produce an improved contig set based on OLC based assembly. All overlap parameters (Minimum Overlap Length, Identity, etc) are user-declarable at runtime. It is written to run on Linux.

Requirements:

You will need to have the following tools installed and in $PATH, or added to $binpath in the tool:

Newbler (specifically runAssembly)
Minimus2 (part of AMOS, also requires MUMmer)

Address of the bookmark: https://github.com/LANL-Bioinformatics/MeGAMerge