WALK-IN-INTERVIEW

A walk-in-Interview is proposed to be held at National Bureau of Animal Genetic Resources, Karnal (Haryana)-132001 at 11:30 AM on 18.12.2013 to select One RA and One SRF as per details given below:

1. One post of Research Associate under DBT sponsored Support under BIPP for the “SanGenix: A comprehensive Next Generation Sequence (NGS) data analysis solution” as Grants in AID. Thepost duration is Upto 31st March 2015 or earlier.

2. One post of Senior Research Fellow under NAIP (Component-4) Bioprospecting of genes and allele mining for abiotic stress tolerance. The post duration is Upto 31st March 2014 or earlier

Essential Qualifications: Ph.D. in Bioinformatics/ Computer Application or
First Class Masters degree in Bioinformatics/ Computer Application with two years experience as evidenced by Publications.

Desirable: Experience in the field of handling Next generation Sequencing Data.

Emolument: Rs. 22,000/- per month + HRA as per admissibility

Age Limit:

40 years for Men
45 years for women as on date of interview

Research Associate: ONE

Duration of engagement: Upto

31st March 2015 or earlier & Coterminus with the project

Responsibilities: To help the PI for Beta testing and development of the SanGenix Tool for NGS data.

Essential Qualifications: First Class Masters’ degree in Bioinformatics/Biotechnology.

Desirable: Experience in the field of Biotechnology/ Bioinformatics

Emoluments:

Rs. 16,000/- per month + HRA as per admissibility.
Senior Research Fellow: ONE
Duration of engagement: Upto 31st March 2014 or earlier & Coterminus with the project

Age Limit

35 years for men
40 years for women as on date of interview

Note: Relaxation in age will be admissible for SC/ST & OBC candidates as per Govt. of India /ICAR norms

1. The applicants must bring with them original documents and brief of research work done during post graduation along with a set of photocopy and latest two passport size photographs.
2. A panel of selected candidates will also be made which may be utilized for filling of positions of shorter durations in future if demand arises.
3. Experience certificate in original, if any 4. The above positions are purely on temporary basis and are co-terminus with the project. No TA/DA will be paid to attend the interview.
5. Any other clarifications can be had on the date of interview.
6. The Director’s decision will be final and binding on all respects.

Advertisement: http://210.212.93.85/rasrfadvertise.pdf

Additional Information:

If you have any questions about scientific aspects of this position, please contact Prof. Lars Bertram, head of LIGA (lars.bertram@uni-luebeck.de).

Please contact Ms. Anna Wolbert for further questions about administrative details (recruiting@uksh.de).

Weitere Informationen erhalten Sie auch unter www.uksh.de/karriere.

Wir freuen uns auf Ihre Bewerbung bis zum 15.03.2020 unter Angabe unserer Ausschreibungsnummer 20190570.119.CL.

More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.programmingr.com/category/stype/r-job-listings/

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

Align/Assemble to a reference
BFAST - Blat-like Fast Accurate Search Tool. Written by Nils Homer, Stanley F. Nelson and Barry Merriman at UCLA.
Bowtie - Ultrafast, memory-efficient short read aligner. It aligns short DNA sequences (reads) to the human genome at a rate of 25 million reads per hour on a typical workstation with 2 gigabytes of memory. Uses a Burrows-Wheeler-Transformed (BWT) index. Link to discussion thread here. Written by Ben Langmead and Cole Trapnell. Linux, Windows, and Mac OS X.
BWA - Heng Lee's BWT Alignment program - a progression from Maq. BWA is a fast light-weighted tool that aligns short sequences to a sequence database, such as the human reference genome. By default, BWA finds an alignment within edit distance 2 to the query sequence. C++ source.
ELAND - Efficient Large-Scale Alignment of Nucleotide Databases. Whole genome alignments to a reference genome. Written by Illumina author Anthony J. Cox for the Solexa 1G machine.
Exonerate - Various forms of pairwise alignment (including Smith-Waterman-Gotoh) of DNA/protein against a reference. Authors are Guy St C Slater and Ewan Birney from EMBL. C for POSIX.
GenomeMapper - GenomeMapper is a short read mapping tool designed for accurate read alignments. It quickly aligns millions of reads either with ungapped or gapped alignments. A tool created by the 1001 Genomes project. Source for POSIX.
GMAP - GMAP (Genomic Mapping and Alignment Program) for mRNA and EST Sequences. Developed by Thomas Wu and Colin Watanabe at Genentec. C/Perl for Unix.
gnumap - The Genomic Next-generation Universal MAPper (gnumap) is a program designed to accurately map sequence data obtained from next-generation sequencing machines (specifically that of Solexa/Illumina) back to a genome of any size. It seeks to align reads from nonunique repeats using statistics. From authors at Brigham Young University. C source/Unix.
MAQ - Mapping and Assembly with Qualities (renamed from MAPASS2). Particularly designed for Illumina with preliminary functions to handle ABI SOLiD data. Written by Heng Li from the Sanger Centre. Features extensive supporting tools for DIP/SNP detection, etc. C++ source
MOSAIK - MOSAIK produces gapped alignments using the Smith-Waterman algorithm. Features a number of support tools. Support for Roche FLX, Illumina, SOLiD, and Helicos. Written by Michael Strömberg at Boston College. Win/Linux/MacOSX
MrFAST and MrsFAST - mrFAST & mrsFAST are designed to map short reads generated with the Illumina platform to reference genome assemblies; in a fast and memory-efficient manner. Robust to INDELs and MrsFAST has a bisulphite mode. Authors are from the University of Washington. C as source.
MUMmer - MUMmer is a modular system for the rapid whole genome alignment of finished or draft sequence. Released as a package providing an efficient suffix tree library, seed-and-extend alignment, SNP detection, repeat detection, and visualization tools. Version 3.0 was developed by Stefan Kurtz, Adam Phillippy, Arthur L Delcher, Michael Smoot, Martin Shumway, Corina Antonescu and Steven L Salzberg - most of whom are at The Institute for Genomic Research in Maryland, USA. POSIX OS required.
Novocraft - Tools for reference alignment of paired-end and single-end Illumina reads. Uses a Needleman-Wunsch algorithm. Can support Bis-Seq. Commercial. Available free for evaluation, educational use and for use on open not-for-profit projects. Requires Linux or Mac OS X.
PASS - It supports Illumina, SOLiD and Roche-FLX data formats and allows the user to modulate very finely the sensitivity of the alignments. Spaced seed intial filter, then NW dynamic algorithm to a SW(like) local alignment. Authors are from CRIBI in Italy. Win/Linux.
RMAP - Assembles 20 - 64 bp Illumina reads to a FASTA reference genome. By Andrew D. Smith and Zhenyu Xuan at CSHL. (published in BMC Bioinformatics). POSIX OS required.
SeqMap - Supports up to 5 or more bp mismatches/INDELs. Highly tunable. Written by Hui Jiang from the Wong lab at Stanford. Builds available for most OS's.
SHRiMP - Assembles to a reference sequence. Developed with Applied Biosystem's colourspace genomic representation in mind. Authors are Michael Brudno and Stephen Rumble at the University of Toronto. POSIX.
Slider- An application for the Illumina Sequence Analyzer output that uses the probability files instead of the sequence files as an input for alignment to a reference sequence or a set of reference sequences. Authors are from BCGSC. Paper is here.
SOAP - SOAP (Short Oligonucleotide Alignment Program). A program for efficient gapped and ungapped alignment of short oligonucleotides onto reference sequences. The updated version uses a BWT. Can call SNPs and INDELs. Author is Ruiqiang Li at the Beijing Genomics Institute. C++, POSIX.
SSAHA - SSAHA (Sequence Search and Alignment by Hashing Algorithm) is a tool for rapidly finding near exact matches in DNA or protein databases using a hash table. Developed at the Sanger Centre by Zemin Ning, Anthony Cox and James Mullikin. C++ for Linux/Alpha.
SOCS - Aligns SOLiD data. SOCS is built on an iterative variation of the Rabin-Karp string search algorithm, which uses hashing to reduce the set of possible matches, drastically increasing search speed. Authors are Ondov B, Varadarajan A, Passalacqua KD and Bergman NH.
SWIFT - The SWIFT suit is a software collection for fast index-based sequence comparison. It contains: SWIFT — fast local alignment search, guaranteeing to find epsilon-matches between two sequences. SWIFT BALSAM — a very fast program to find semiglobal non-gapped alignments based on k-mer seeds. Authors are Kim Rasmussen (SWIFT) and Wolfgang Gerlach (SWIFT BALSAM)
SXOligoSearch - SXOligoSearch is a commercial platform offered by the Malaysian based Synamatix. Will align Illumina reads against a range of Refseq RNA or NCBI genome builds for a number of organisms. Web Portal. OS independent.
Vmatch - A versatile software tool for efficiently solving large scale sequence matching tasks. Vmatch subsumes the software tool REPuter, but is much more general, with a very flexible user interface, and improved space and time requirements. Essentially a large string matching toolbox. POSIX.
Zoom - ZOOM (Zillions Of Oligos Mapped) is designed to map millions of short reads, emerged by next-generation sequencing technology, back to the reference genomes, and carry out post-analysis. ZOOM is developed to be highly accurate, flexible, and user-friendly with speed being a critical priority. Commercial. Supports Illumina and SOLiD data.
NCGR uses GMAP (http://www.gene.com/share/gmap/) to alignment Solexa reads. GMAP is free, though.
Exonerate (http://www.ebi.ac.uk/~guy/exonerate/)
MUMmer (http://mummer.sourceforge.net/)
The mapping short reads called gnumap (http://dna.cs.byu.edu/gnumap/) made to increase the accuracy with duplicate matches. Open source, creates viewable output (with Affy's Integrated Genome Browser), and produces results very similar to novocraft's.
SOCS (short oligonucleotides in color space)
BFAST https://secure.genome.ucla.edu/index.php/BFAST

De novo Align/Assemble
ABySS - Assembly By Short Sequences. ABySS is a de novo sequence assembler that is designed for very short reads. The single-processor version is useful for assembling genomes up to 40-50 Mbases in size. The parallel version is implemented using MPI and is capable of assembling larger genomes. By Simpson JT and others at the Canada's Michael Smith Genome Sciences Centre. C++ as source.
ALLPATHS - ALLPATHS: De novo assembly of whole-genome shotgun microreads. ALLPATHS is a whole genome shotgun assembler that can generate high quality assemblies from short reads. Assemblies are presented in a graph form that retains ambiguities, such as those arising from polymorphism, thereby providing information that has been absent from previous genome assemblies. Broad Institute.
Edena - Edena (Exact DE Novo Assembler) is an assembler dedicated to process the millions of very short reads produced by the Illumina Genome Analyzer. Edena is based on the traditional overlap layout paradigm. By D. Hernandez, P. François, L. Farinelli, M. Osteras, and J. Schrenzel. Linux/Win.
EULER-SR - Short read de novo assembly. By Mark J. Chaisson and Pavel A. Pevzner from UCSD (published in Genome Research). Uses a de Bruijn graph approach.
MIRA2 - MIRA (Mimicking Intelligent Read Assembly) is able to perform true hybrid de-novo assemblies using reads gathered through 454 sequencing technology (GS20 or GS FLX). Compatible with 454, Solexa and Sanger data. Linux OS required.
SEQAN - A Consistency-based Consensus Algorithm for De Novo and Reference-guided Sequence Assembly of Short Reads. By Tobias Rausch and others. C++, Linux/Win.
SHARCGS - De novo assembly of short reads. Authors are Dohm JC, Lottaz C, Borodina T and Himmelbauer H. from the Max-Planck-Institute for Molecular Genetics.
SSAKE - The Short Sequence Assembly by K-mer search and 3' read Extension (SSAKE) is a genomics application for aggressively assembling millions of short nucleotide sequences by progressively searching for perfect 3'-most k-mers using a DNA prefix tree. Authors are René Warren, Granger Sutton, Steven Jones and Robert Holt from the Canada's Michael Smith Genome Sciences Centre. Perl/Linux.
SOAPdenovo - Part of the SOAP suite. See above.
VCAKE - De novo assembly of short reads with robust error correction. An improvement on early versions of SSAKE.
Velvet - Velvet is a de novo genomic assembler specially designed for short read sequencing technologies, such as Solexa or 454. Need about 20-25X coverage and paired reads. Developed by Daniel Zerbino and Ewan Birney at the European Bioinformatics Institute (EMBL-EBI).
SOAP (http://soap.genomics.org.cn) by Ruiqiang Li, as has been pointed by ECO.
Euler-SR (Euler-Short Reads Assembly, http://euler-assembler.ucsd.edu/portal/) by Mark J. Chaisson and Pavel A. Pevzner from UCSD. (published in Genome Research)
RMAP (A program for mapping Solexa reads, http://rulai.cshl.edu/rmap/) by Andrew D. Smith and Zhenyu Xuan at CSHL. (published in BMC Bioinformatics)
Short read aligner called Bowtie (http://bowtie-bio.sourceforge.net/) designed for fast mapping of Illumina reads

SNP/Indel Discovery
ssahaSNP - ssahaSNP is a polymorphism detection tool. It detects homozygous SNPs and indels by aligning shotgun reads to the finished genome sequence. Highly repetitive elements are filtered out by ignoring those kmer words with high occurrence numbers. More tuned for ABI Sanger reads. Developers are Adam Spargo and Zemin Ning from the Sanger Centre. Compaq Alpha, Linux-64, Linux-32, Solaris and Mac
PolyBayesShort - A re-incarnation of the PolyBayes SNP discovery tool developed by Gabor Marth at Washington University. This version is specifically optimized for the analysis of large numbers (millions) of high-throughput next-generation sequencer reads, aligned to whole chromosomes of model organism or mammalian genomes. Developers at Boston College. Linux-64 and Linux-32.
PyroBayes - PyroBayes is a novel base caller for pyrosequences from the 454 Life Sciences sequencing machines. It was designed to assign more accurate base quality estimates to the 454 pyrosequences. Developers at Boston College.
Maq is also able to find SNPs with its own alignment. It has a graphical viewer, but again for its own alignment format.
SSAHA has been optimized for short-reads, too. But yes, SSAHASNP appears in your "SNP/INDEL discovery" category.

Genome Annotation/Genome Browser/Alignment Viewer/Assembly Database
EagleView - An information-rich genome assembler viewer. EagleView can display a dozen different types of information including base quality and flowgram signal. Developers at Boston College.
LookSeq - LookSeq is a web-based application for alignment visualization, browsing and analysis of genome sequence data. LookSeq supports multiple sequencing technologies, alignment sources, and viewing modes; low or high-depth read pileups; and easy visualization of putative single nucleotide and structural variation. From the Sanger Centre.
MapView - MapView: visualization of short reads alignment on desktop computer. From the Evolutionary Genomics Lab at Sun-Yat Sen University, China. Linux.
SAM - Sequence Assembly Manager. Whole Genome Assembly (WGA) Management and Visualization Tool. It provides a generic platform for manipulating, analyzing and viewing WGA data, regardless of input type. Developers are Rene Warren, Yaron Butterfield, Asim Siddiqui and Steven Jones at Canada's Michael Smith Genome Sciences Centre. MySQL backend and Perl-CGI web-based frontend/Linux.
STADEN - Includes GAP4. GAP5 once completed will handle next-gen sequencing data. A partially implemented test version is available here
XMatchView - A visual tool for analyzing cross_match alignments. Developed by Rene Warren and Steven Jones at Canada's Michael Smith Genome Sciences Centre. Python/Win or Linux.

Counting e.g. CHiP-Seq, Bis-Seq, CNV-Seq
BS-Seq - The source code and data for the "Shotgun Bisulphite Sequencing of the Arabidopsis Genome Reveals DNA Methylation Patterning" Nature paper by Cokus et al. (Steve Jacobsen's lab at UCLA). POSIX.
CHiPSeq - Program used by Johnson et al. (2007) in their Science publication
CNV-Seq - CNV-seq, a new method to detect copy number variation using high-throughput sequencing. Chao Xie and Martti T Tammi at the National University of Singapore. Perl/R.
FindPeaks - perform analysis of ChIP-Seq experiments. It uses a naive algorithm for identifying regions of high coverage, which represent Chromatin Immunoprecipitation enrichment of sequence fragments, indicating the location of a bound protein of interest. Original algorithm by Matthew Bainbridge, in collaboration with Gordon Robertson. Current code and implementation by Anthony Fejes. Authors are from the Canada's Michael Smith Genome Sciences Centre. JAVA/OS independent. Latest versions available as part of the Vancouver Short Read Analysis Package
MACS - Model-based Analysis for ChIP-Seq. MACS empirically models the length of the sequenced ChIP fragments, which tends to be shorter than sonication or library construction size estimates, and uses it to improve the spatial resolution of predicted binding sites. MACS also uses a dynamic Poisson distribution to effectively capture local biases in the genome sequence, allowing for more sensitive and robust prediction. Written by Yong Zhang and Tao Liu from Xiaole Shirley Liu's Lab.
PeakSeq - PeakSeq: Systematic Scoring of ChIP-Seq Experiments Relative to Controls. a two-pass approach for scoring ChIP-Seq data relative to controls. The first pass identifies putative binding sites and compensates for variation in the mappability of sequences across the genome. The second pass filters out sites that are not significantly enriched compared to the normalized input DNA and computes a precise enrichment and significance. By Rozowsky J et al. C/Perl.
QuEST - Quantitative Enrichment of Sequence Tags. Sidow and Myers Labs at Stanford. From the 2008 publication Genome-wide analysis of transcription factor binding sites based on ChIP-Seq data. (C++)
SISSRs - Site Identification from Short Sequence Reads. BED file input. Raja Jothi @ NIH. Perl.
SeqMap (http://biogibbs.stanford.edu/~jiangh/SeqMap/) - work like ELand, can do 3 or more bp mismatches and also insdel
ChIPSeq analysis is:  http://dir.nhlbi.nih.gov/papers/lmi/epigenomes/sissrs/

See also this thread for ChIP-Seq, until I get time to update this list.

Alternate Base Calling
Rolexa - R-based framework for base calling of Solexa data. Project publication
Alta-cyclic - "a novel Illumina Genome-Analyzer (Solexa) base caller"

Transcriptomics
ERANGE - Mapping and Quantifying Mammalian Transcriptomes by RNA-Seq. Supports Bowtie, BLAT and ELAND. From the Wold lab.
G-Mo.R-Se - G-Mo.R-Se is a method aimed at using RNA-Seq short reads to build de novo gene models. First, candidate exons are built directly from the positions of the reads mapped on the genome (without any ab initio assembly of the reads), and all the possible splice junctions between those exons are tested against unmapped reads. From CNS in France.
MapNext - MapNext: A software tool for spliced and unspliced alignments and SNP detection of short sequence reads. From the Evolutionary Genomics Lab at Sun-Yat Sen University, China.
QPalma - Optimal Spliced Alignments of Short Sequence Reads. Authors are Fabio De Bona, Stephan Ossowski, Korbinian Schneeberger, and Gunnar Rätsch. A paper is available.
RSAT - RSAT: RNA-Seq Analysis Tools. RNASAT is developed and maintained by Hui Jiang at Stanford University.
TopHat - TopHat is a fast splice junction mapper for RNA-Seq reads. It aligns RNA-Seq reads to mammalian-sized genomes using the ultra high-throughput short read aligner Bowtie, and then analyzes the mapping results to identify splice junctions between exons. TopHat is a collaborative effort between the University of Maryland and the University of California, Berkeley
NGS-Trex: Next Generation Sequencing Transcriptome profile explorer http://www.biomedcentral.com/1471-2105/14/S7/S10

Reference

Illumina has a software list: http://www.illumina.com/pagesnrn.ilmn?ID=245.

Some softwares in his blog (http://www.fejes.ca/labels/DNA.html)

http://seqanswers.com/wiki/Software

http://rosalind.info/problems/list-view/

Address of the bookmark: http://rosalind.info/problems/list-view/

Installation

To download the development version of pacman:

Download the zip ball or tar ball, decompress and run R CMD INSTALL on it, or use the devtools package to install the development version:

## Make sure your current packages are up to date
update.packages()
## devtools is required
devtools::install_github("trinker/pacman")

Note: Windows users need Rtools and devtools to install this way.

More at https://github.com/trinker/pacman

It is possible to create a vector by typing data directly into R using the combine function ‘c’

x

same as

x

creates the vector x with the numbers between 1 and 5.

You can see what is in an object at any time by typing its name;

x

will produce the output ‘[1] 1 2 3 4 5′

Note that names need to be quoted

daysofweek ← c(‘Monday’, ‘Tuesday’, ‘Wednesday’, ‘Thursday’, ‘Friday’);

Usually however you want to input from a file. We have touched on the ‘read.table’ function already.

mydata

Now mydata is a data frame with multiple vectors

each vector can be identified by the default syntax

#if any of these are typed it will print to screen

mydata$V1 mydata$V2 mydata$V3

By default the function assumes certain things from the file

• The file is a plain text file (there are function to read excel files: not covered here)
• columns are separated by any number of tabs or spaces
• there is the same number of data points in each column
• there is no header row (labels for the columns)
• there is no column with names for the rows** [I’ll explain].

If any of these are false, we need to tell that to the function

If it has a header column

mydata header=T also works

Note that there is a comma between different parts of the functions arguments

If there is one less column in the header row, then R assumes that the 1^st column of data after the header are the row names

Now the vectors (columns) are identified by their name

#if any of these are typed it will print to screen

mydata$A mydata$B mydata$C

# Summary about the whole data frame

summary(mydata)

# Summary information of column A

summary(mydata$A)

We can shortcut having to type the data frame each time by attaching it

attach(mydata)

# summary of column B as ‘mydata’ is attached

summary(B)

Two other important options for read.table

If is is separated only by tabs and has a header

mydata

Really useful if you have spaces in the contents of some columns, so R does not mess up reading the columns . However if the columns or of an uneven length it will tell you.

If you know that the file has uneven columns

mydata

This causes R to fill empty spaces in a columns with ‘NA’ .

The last two examples will still work with our file and give the same result as with only headers=T

Graphs

to get an idea of what R is capable of type

demo(graphics)

steps through the examples, and the code is printed to the screen

We will work with simpler examples that have immediate use to biologists.

Remember to get more information about the options to a function type ‘?function’

Histogram of A

hist(mydata$A)

If there was more data we could increase the number of vertical columns with the option, breaks=50 (or another relevant number).

boxplot(mydata)

We can get rid of the need to type the data frame each time by using the attach function

# if not already done so

attach(mydata)

boxplot(mydata$A, mydata$B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

same as

boxplot(A, B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

Scatter plot

# if not already done so

attach(mydata)

plot(A,B) # or plot(mydata$A, mydata$B)

SAVING an image

Windows users (Rgui) RIGHT click on image and select which you want.

These instructions work for everyone.

You need to create a new device of the type of file you need, then send the data to that device

to save as a png file (easy to load into the likes of powerpoint, also great for web applications.

png(‘filename’)

boxplot(A, B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

or to save as a pdf

pdf(‘filename’)

boxplot(A, B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

Note

• Nothing will appear on screen, the output is going to the file
• Also it may not be saved immediately but will once the device (or R) is turned quit.

To quit R type

q() # If you save your session, next time you start R, you will have your data preloaded.

Or if you want to remain in R

dev.off() #turns of the png (or pdf etc) device, thus forces the data to save