BOL: Related items

DAVI: Deep learning-based tool for alignment and single nucleotide variant identification

Jit — Tue, 16 Mar 2021 05:41:33 -0500

DAVI consists of models for both global and local alignment and for variant calling. We have evaluated the performance of DAVI against existing state-of-the-art tool sets and found that its accuracy and performance is comparable to existing tools used for bench-marking. We further demonstrate that while existing tools are based on data generated from a specific sequencing technology, the models proposed in DAVI are generic and can be used across different NGS technologies as well as across different species

https://iopscience.iop.org/article/10.1088/2632-2153/ab7e19/pdf

Address of the bookmark: https://github.com/gguptaiitd/NEAT

Linux SSH Client Commands for Bioinformatics

Rahul Nayak — Thu, 13 Mar 2014 17:16:32 -0500

Here come on let play with the following basic command line usage of the ssh client.

1. Check your SSH Client Version:

Checking for your SSH client is very sare, but sometimes it may be necessary to identify the SSH client that you are currently running and it’s corresponding version number. The SSh client can be identified as follows

$ ssh -V
OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2013

$ ssh -V
ssh: SSH Secure Shell 3.2.9.1 (non-commercial version) on i686-pc-linux-gnu

2. Connect and login to remote host:

The First time when you login to the remotehost from a localhost, it will display the host key not found message and you can give “yes” to continue. The host key of the remote host will be added under .ssh2/hostkeys directory of your home directory, as shown below.

localhost$ ssh -l jit remotehost.example.com

jit@remotehost.example.com password:

remotehost.example.com$

The Second time when you login to the remote host from the localhost, it will prompt only for the password as the remote host key is already added to the known hosts list of the ssh client.

localhost$ ssh -l jit remotehost.example.com
jit@remotehost.example.com password:
remotehost.example.com$

For some reason, if the host key of the remote host is changed after you logged in for the first time, you may get a warning message as shown below. This could be because of various reasons such as 1) Sysadmin upgraded/reinstalled the SSH server on the remote host 2) someone is doing malicious activity etc., The best possible action to take before saying “yes” to the message below, is to call your sysadmin and identify why you got the host key changed message and verify whether it is the correct host key or not.

localhost$ ssh -l jit remotehost.example.com

jit @remotehost.example.com's password:
remotehost$

4. Debug SSH Client:

Sometimes it is necessary to view debug messages to troubleshoot any SSH connection issues. For this purpose, pass -v (lowercase v) option to the ssh as shown below.

Example without debug message:

        localhost$ ssh -l jit remotehost.example.com
        warning: Connecting to remotehost.example.com failed: No address associated to the name
        localhost$

Example with debug message:

        locaclhost$ ssh -v -l jit remotehost.example.com
        debug: SshConfig/sshconfig.c:2838/ssh2_parse_config_ext: Metaconfig parsing stopped at line 3.
        debug: SshConfig/sshconfig.c:637/ssh_config_set_param_verbose: Setting variable 'VerboseMode' to 'FALSE'.
        debug: SshConfig/sshconfig.c:3130/ssh_config_read_file_ext: Read 17 params from config file.
        debug: Ssh2/ssh2.c:1707/main: User config file not found, using defaults. (Looked for '/home/jit/.ssh2/ssh2_config')
        debug: Connecting to remotehost.example.com, port 22... (SOCKS not used)
        warning: Connecting to remotehost.example.com failed: No address associated to

5. Escape Character: (Toggle SSH session, SSH session statistics etc.)

Escape character ~ get’s SSH clients attention and the character following the ~ determines the escape command.
Toggle SSH Session: When you’ve logged on to the remotehost using ssh from the localhost, you may want to come back to the localhost to perform some activity and go back to remote host again. In this case, you don’t need to disconnect the ssh session to the remote host. Instead follow the steps below.

i. Login to remotehost from localhost: localhost$ssh -l jit remotehost
ii. Now you are connected to the remotehost: remotehost$
iii. To come back to the localhost temporarily, type the escape character ~ and Control-Z. When you type ~ you will not see that immediately on the screen until you press and press enter. So, on the remotehost in a new line enter the following key strokes for the below to work: ~

    remotehost$ ~^Z
    [1]+ Stopped                 ssh -l jit remotehost
    localhost$

iv. Now you are back to the localhost and the ssh remotehost client session runs as a typical unix background job, which you can check as shown below:

    localhost$ jobs
    [1]+ Stopped                 ssh -l jit remotehost

v. You can go back to the remote host ssh without entering the password again by bringing the background ssh remotehost session job to foreground on the localhost

    localhost$ fg %1
    ssh -l jit remotehost
    remotehost$

Perlbrew: admin-free perl installation management tool.

Jit — Wed, 12 Jul 2017 03:53:08 -0500

perlbrew is an admin-free perl installation management tool. The latest version is 0.79, read the release note: Release 0.79.

Copy & Paste this line into your terminal:

\curl -L https://install.perlbrew.pl | bash

Or, if your system does not have curl but something else:

# Linux
\wget -O - https://install.perlbrew.pl | bash

# FreeBSD
\fetch -o- https://install.perlbrew.pl | sh

If you prefer to install with cpan, there are two steps:

sudo cpan App::perlbrew
perlbrew init

If it is installed with cpan, the perlbrew executable should be installed as /usr/bin/perlbrew or /usr/local/bin/perlbrew. For all users who want to use perlbrew, a prior perlbrew init needs to be executed.

The default perlbrew root directory is ~/perl5/perlbrew, which can be changed by setting PERLBREW_ROOTenvironment variable before the installation and initialization. For more advanced installation process, please read the perlbrew document.

Address of the bookmark: https://perlbrew.pl/

Basic Notions in Molecular Biology and Genetics

Antony Campos — Sun, 16 Mar 2014 18:15:29 -0500

This is a presentation about some fundamental concepts applied in molecular biology and genetics, also it contains a little bit of the experience that one of our members has gained in his years of undergraduate state related to molecular cloning. Our research group, called "BIOPHARM" (Acronymus of Laboratory of Bioinformatics and Pharmacogenetics), was stablished on 2007, took it a bit of years to make it real this initative, although, nowadays, we're working on some projects involved in those fields. This research group belongs to the Department of Biochemistry, Faculty of Pharmacy and Biochemistry, Universidad Nacional Mayor de San Marcos, Lima, Perú. We try to encourage research initiatives, helping them and also we use to participate in differents courses, congress and symposiums.

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Gerstein Lab

Wed, 19 Mar 2014 12:48:20 -0500

The focus of the Gerstein Lab is interpreting personal genomes, particularly in relation to disorders, such as cancer. This endeavor has a number of related aspects described below. Moreover, the approaches we take have broad connections to a variety of data-intensive fields, within the emerging discipline of data science.

Personal Genome Variation: SVs
Human Genome Annotation: Processing Next-Gen Sequencing Data
Comparative Genomics: Pseudogenes as Molecular Fossils
Protein Structure and Function: Macromolecular Motions
Analysis of Diverse Networks
Genomics at the Forefront of Data Science

Lab page: http://www.gersteinlab.org/

Synima: Synteny Imaging tool

Jit — Sun, 10 Dec 2017 17:03:48 -0600

Synteny Imaging tool (Synima) written in Perl, which uses the graphical features of R. Synima takes orthologues computed from reciprocal best BLAST hits or OrthoMCL, and DAGchainer, and outputs an overview of genome-wide synteny in PDF. Each of these programs are included with the Synima package, and a pipeline for their use. Synima has a range of graphical parameters including size, colours, order, and labels, which are specified in a config file generated by the first run of Synima – and can be subsequently edited. Synima runs quickly on a command line to generate informative and publication quality figures. Synima is open source and freely available from https://github.com/rhysf/Synima under the MIT License.

Address of the bookmark: https://github.com/rhysf/Synima

Bioinformatics PhD at University of Calcutta

Mon, 31 Mar 2014 08:41:04 -0500

University of Calcutta
Department of Biophysics, Molecular Biology & Bioinformatics

Applications are invited for admission to the Ph.D. programme in the Department of Biophysics, Molecular Biology & Bioinformatics, University of Calcutta for the year 2014 from eligible candidates who would be placed under the departmental teachers or affiliated research supervisors for the pursuance of their Ph.D. programme.

Candidates are requested to download the Ph.D. admission test application form from the University website and apply in the prescribed proforma by paying Rs. 100/- through a challan available through different University Cash counters. The challan is to be duly forwarded through the Head, Department of Biophysics, Molecular Biology & Bioinformatics, University of Calcutta.

The completed application form with a copy of the paid challan is to be submitted to the office of the Department by April 16, 2014.

Syllabus for the Test: The questions for the admission test and interview will be based on topics in the following areas:

Mathematical methods, Molecular and Cellular Biophysics, Molecular and Cell Biology, Biochemistry, Genetics, Plant Biology, Developmental biology, Neurobiology, Biotechnology and Bioinformatics.

However, the interview will be primarily based on the research emphasis of the candidate. Candidates must clearly indicate the program in which they want to apply.

Date of Admission test : April 22, 2014 (Tuesday)

Date of publication of selection list for the interview : April 22, 2014(Tuesday)

Date of Interview : April 23, 2014 (Wednesday)

Number of vacancies for the Ph.D. programme : 12

Reservation policy will be followed as per rules.

Candidates with valid NET/GATE/M.Phil. or equivalent qualifications are not required to appear at the admission test but would need to qualify in the interview.

http://www.caluniv.ac.in/admission%20notice/PHD_BIO_PHYSICS.pdf

Heap: a highly sensitive and accurate SNP detection tool for low-coverage high-throughput sequencing data

Jit — Thu, 19 Apr 2018 08:06:03 -0500

Heap, that enables robustly sensitive and accurate calling of SNPs, particularly with a low coverage NGS data, which must be aligned to the reference genome sequences in advance. To reduce false positive SNPs, Heap determines genotypes and calls SNPs at each site except for sites at the both end of reads or containing a minor allele supported by only one read. Performance comparison with existing tools showed that Heap achieved the highest F-scores with low coverage (7X) restriction-site associated DNA sequencing reads of sorghum and rice individuals. This will facilitate cost-effective GWAS and GP studies in this NGS era. Code and documentation of Heap are freely available from https://github.com/meiji-bioinf/heap and our web site (http://bioinf.mind.meiji.ac.jp/lab/en/tools.html).

Address of the bookmark: https://github.com/meiji-bioinf/heap

Phylogenomics/Phylogenetic website

Aaryan Lokwani — Mon, 07 Apr 2014 02:17:18 -0500

Welcome to phylobabble.org, a discussion forum for phylogenetic theory and applications. The primary goal of this forum is to discuss best practice and new developments in phylogenetics. Although we do have a Troubleshooting category for getting feedback on analyses, this is not a help site for running phylogenetics programs.

A great place to chat about phylogenetics for researchers and the broader community of students and science-interested citizens.

Address of the bookmark: http://phylobabble.org/