BOL: Related items

JUNIOR RESEARCH FELLOW POSITION at School of Biotechnology, Gautam Buddha University Greater Noida

Tue, 01 Apr 2014 14:46:57 -0500

Walk-In Interview for one position of Junior Research Fellow (JRF) in a SERB, Department of Science and Technology (DST) funded research project entitled “Design and evaluation of novel Beta-3 adrenoreceptor agonists for potential antidepressant activity” under the supervision of Dr. Shakti Sahi which was scheduled on 31st March, 2014 is now re-scheduled on account of public holiday.

The interview will now be held 01st April 2014. The monthly fellowship of JRF will be Rs 12,000/- plus HRA as per the University rules.

Essential Qualification: Master degree in any discipline of Life Science with NET qualified or valid GATE score.

Desirable Qualification: Preference will be given to candidates having research experience in Bioinformatics.

The interested candidates should report for the Interview on 01st April, 2014 at 10:00 am in the Conference Room of Dean, School of Biotechnology, First floor, Gautam Buddha University, Greater Noida. Interested candidates may also send their resume to undersigned by postmail/e-mail shaktis@gbu.ac.in or shaktisahi@gmail.com. No TA and DA will be paid for appearing for the interview.

Dr. Shakti Sahi
(Principle Investigator)
School of Biotechnology
Gautam Buddha University
Greater Noida
Ph:9971791897

www.gbu.ac.in/Recruitment/JRF_advertisement_DSTProject_Shakti_26March14.pdf

SMASH: An alignment-free tool to find and visualise rearrangements between pairs of DNA sequences

Jit — Thu, 21 Dec 2017 08:26:57 -0600

SMASH is a completely alignment-free method to find and visualise rearrangements between pairs of DNA sequences. The detection is based on relative compression, namely using a FCM, also known as Markov model, of high context order (typically 20). The method has been approached with a tool (also called SMASH). For visualization, SMASH outputs a SVG image, with an ideogram output architecture, where the patterns are represented with several HSV values (only value varies). The following image, illustrating the information maps between human and chimpanzee for the several chromosomes, depicts an example:

Address of the bookmark: https://github.com/pratas/smash

Postodoc in Computational/Systems Biology and Machine Learning

Wed, 09 Apr 2014 20:47:57 -0500

One profile of Computational/Systems Biology and Machine Learning at Postdoc level is needed at the Laboratory of Immunobiology of Neurological Disorders led by Cinthia Farina, Institute of Experimental Neurology, Ospedale San Raffaele, Milano. The projects of interest for this application involve research on translational bioinformatics in complex human disorders.

You have a PhD in Computational Science, Bioinformatics, or equivalent.

Especially relevant skills for the profile are:
1. In-depth understanding and implementation of methods and development of
algorithms for statistical and machine learning classification, clustering, predictive
modelling.
2. Experience on transcriptomics and clinical data analysis, in particular gene regulatory networks, protein interactomes, development of diagnostic tools.

3. Solid experience with data mining, bioinformatics programming and statistics for bioinformatics.
4. Flexibility and willing to work across multiple projects and technology in a rapidly evolving scientific context.

Candidates with programming/scripting experience are also welcome. In particular, proficiency in one or more mainstream programming languages (C, C++, Java, Python, Perl, etc.), together with the understanding of relational database design and SQL/DBMS systems (e.g. MySQL, PHP, Oracle).
Experience with the analysis of next-generation sequencing data is a plus.
Clear demonstration of experience in analysis and modelling of omics and clinical data must be provided.

Interested candidates should send to farina.cinthia@hsr.it:

1. CV (please show evidences of relevant titles, projects, courses, references, etc.)
2. One page with a list of research topics (i.e. ongoing projects)
3. earliest availability
4. 2-3 contact names

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

Research Associate (RA) at INSTITUTE OF ADVANCED STUDY IN SCIENCE AND TECHNOLOGY

Mon, 05 May 2014 08:44:24 -0500

INSTITUTE OF ADVANCED STUDY IN SCIENCE AND TECHNOLOGY
(An Autonomous Institute under Department of Science and Technology, Govt. of India)
Paschim Boragaon, Garchuk, Guwahati-781035

Appointment Adv.No.2

Applications in plain paper are invited from Indian citizens for one/two position each of Research Associate, Traineeship and Studentship for BIF facility, Division of Life Sciences, IASST.

Applications with complete Bio-data containing contact address, e-mail and phone number, two recent passport size photographs and attested copies of mark sheets, certificates etc., should be sent to the Registrar, IASST, Paschim Boragaon, Garchuk, Guwahati – 781035, Assam, so as to reach on or before 5/05/2014.

A. Research Associate:

Number of vacancies: 1 (One)

Qualifications:

PhD in Bioinformatics or allied disciplines with knowledge of Bioinformatics. The candidates who have submitted PhD thesis may also apply.

In case, candidates having PhD are not found, candidates having MSc in Bioinformatics or allied disciplines with sound knowledge of Bioinformatics will be preferred.

Remuneration: Candidate having PhD will get a consolidated remuneration of Rs. 22,000/- +HRA per month. MSc having NET/GATE/SLET qualified candidate will get a remuneration of Rs. 16,000/= and HRA and candidate with only MSc will get a remuneration of Rs.14,000/- and HRA.

Tenure:

The post is initially for one year and may be extended depending on the performance till the tenure of the project.

B. Traineeship:

Number of vacancies: 2 (Two)

Qualifications:

Candidate with a postgraduate degree in Bioinformatics/Biotechnology/Life sciences from a recognised University

Remuneration: Rs. 5000/month for 6 months

C. Studentship:

Number of vacancies: 2 (Two)

Qualifications:

Candidate pursuing M.Sc in bioinformatics in a recognised University.

Remuneration: Rs. 5000/month for 6 months

http://iasst.gov.in/pdf/recruitment/advt%20no_2_24042014.pdf

“One code to find them all”: a perl tool to conveniently parse RepeatMasker output files

Poonam Mahapatra — Mon, 04 Jun 2018 03:45:15 -0500

One code to find them all is a set of perl scripts to extract useful information from RepeatMasker about transposable elements, retrieve their sequences and get some quantitative information. Assemble RepeatMasker hits into complete TE copies, including LTR-retrotransposon Retrieve corresponding TE sequences, and flanking sequences, from the local fasta files Compute summary statistics for each TE family (number of TE copies, genome coverage...) Ambiguous cases such as nested TE can be assembled into copies automatically or manually Allow for working with a TE user-defined library Allow for working with only a user-chosen set of TE families http://doua.prabi.fr/software/one-code-to-find-them-all

Address of the bookmark: http://doua.prabi.fr/software/one-code-to-find-them-all

“On” and “Off” the neuron !!!

Rahul Nayak — Fri, 25 Apr 2014 19:31:13 -0500

Optogenetics is a recent innovation in neuroscience that gives researchers the ability to control the activity of neurons with light. With this powerful tool, researchers are teasing apart the biological basis of memory, behavior, and disease (see “Scientists Make Mice ‘Remember’ Things That Didn’t Happen” and “An On-Off Switch for Anxiety,”). But for the first several years of this technology’s existence, the proteins that scientists added to neurons to make them react to light were only good at activating neurons. That limited researchers’ ability to understand neuronal circuits, sets of interconnected neurons that are thought to control behavior and, when misfiring, to underlie many brain conditions. Problems can arise from any imbalance in circuit activity, whether too much or too little.

Now, two research groups have engineered new optogenetic proteins that can be used to efficiently silence neurons. One of the two new proteins comes from the lab of Karl Deisseroth, a psychiatrist and neuroscientist at Stanford University who helped develop optogenetics as a research tool. His group’s new “off” switch for neurons was created by changing 10 of the 333 amino acids in an existing optogenetic protein, which itself had been engineered by combining natural proteins from green algae. That advance “creates a powerful tool that allows neuroscientists to apply a brake in any specific circuit with millisecond precision,” said Thomas Insel, director of the National Institute of Mental Health, in a released statement. The other new silencing protein, developed by scientists at the Humboldt University of Berlin and collaborators, was created by changing amino acids in the same existing optogenetic protein.

Some researchers are also looking to optogenetics as a potential treatment for patients with a variety of conditions (see “For Mice, and Maybe Men, Pain Is Gone in a Flash,” and “Flipping on the Lights to Halt Seizures”) but there are huge challenges to overcome. The method requires genetic modification of cells to make them light-sensitive. It also requires implanted light sources for all but the shallowest of nerve endings.

SALSA: A tool to scaffold long read assemblies with Hi-C

Jit — Fri, 15 Jun 2018 04:01:15 -0500

This code is used to scaffold your assemblies using Hi-C data. This version implements some improvements in the original SALSA algorithm. If you want to use the old version, it can be found in the old_salsa branch. To use the latest version, first run the following commands: cd SALSA make To run the code, you will need Python 2.7, BOOST libraries and Networkx(version lower than 1.2). If you consider using this tool, please cite our publication which describes the methods used for scaffolding. Ghurye, J., Pop, M., Koren, S., Bickhart, D., & Chin, C. S. (2017). Scaffolding of long read assemblies using long range contact information. BMC genomics, 18(1), 527. Link Ghurye, J., Rhie, A., Walenz, B.P., Schmitt, A., Selvaraj, S., Pop, M., Phillippy, A.M. and Koren, S., 2018. Integrating Hi-C links with assembly graphs for chromosome-scale assembly. bioRxiv, p.261149 Link For any queries, please either ask on github issue page or send an email to Jay Ghurye (jayg@cs.umd.edu).

Address of the bookmark: https://github.com/machinegun/SALSA

Check Linux server configuration !!

Rahul Nayak — Tue, 06 May 2014 01:10:57 -0500

Bioinformatician uses servers for computational analysis. Sometime we need to check the server details before running our programs or tools. Here I am showing some basic commands using them you can gather the system/server information.

To check what version of Operating System is installed on the server you can use the following commands:-
=================================================================
1.cat /etc/issue
[root@localhost ~]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
Kernel \r on an \m

2.cat /etc/redhat-release
[root@localhost ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)

3.lsb_release -a
[root@localhost ~]# lsb_release -a
LSB Version:    :core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: RedHatEnterpriseServer
Description:    Red Hat Enterprise Linux Server release 5.5 (Tikanga)
Release:        5.5
Codename:       Tikanga

To check whether the operating system is 32 or 64bit:-
================================
# uname -i
[root@localhost ~]# uname -i
i386
(i386 represents that server is having 32bit operating system)

[root@localhost ~]# uname -i
x86_64
(x86_64 represents that server is having 64bit operating system)

To see the processor/CPU information:-
=============================
# cat /proc/cpuinfo
[root@localhost ~] cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Xeon(R) CPU            5130 @ 2.00GHz
stepping        : 6
cpu MHz         : 1995.087
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 3990.17
(Here processor number 0 indicates that the system is having one process(processor number starts with zero))

To check memory information:-
===========================
# free -m
[root@localhost ~]# free -m
             total       used       free     shared    buffers     cached
Mem:          5066       3513       1552          0        612       2319
-/+ buffers/cache:        582       4484
Swap:         1983          0       1983

# cat /proc/meminfo
[root@localhost ~]# cat /proc/meminfo
MemTotal:      5187752 kB
MemFree:       1639300 kB
Buffers:        627024 kB
Cached:        2374944 kB
SwapCached:          0 kB
Active:        2458788 kB
Inactive:       920964 kB
HighTotal:     4325164 kB
HighFree:      1561936 kB
LowTotal:       862588 kB
LowFree:         77364 kB
SwapTotal:     2031608 kB
SwapFree:      2031608 kB
Dirty:             704 kB
Writeback:           0 kB
AnonPages:      377892 kB
Mapped:          35328 kB
Slab:           153036 kB
PageTables:       6316 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:   4625484 kB
Committed_AS:   977132 kB
VmallocTotal:   116728 kB
VmallocUsed:      4492 kB
VmallocChunk:   112124 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
Hugepagesize:     2048 kB

To check the model and serial name of the server:-
=======================================
[root@localhost ~]# dmidecode | egrep -i "product name|Serial number"
Product Name: PowerEdge R710
Serial Number: AB8CDE1


To check the host name:-
=====================
[root@localhost ~]# uname -n
localhost

[root@localhost ~]# hostname
localhost

To check the kernel version:-
========================
[root@localhost ~]# uname -r
2.6.18-238.9.1.el5PAE

gSearch: a fast and flexible general search tool for whole-genome sequencing

Jit — Mon, 06 Aug 2018 17:19:15 -0500

gSearch compares sequence variants in the Genome Variation Format (GVF) or Variant Call Format (VCF) with a pre-compiled annotation or with variants in other genomes. Its search algorithms are subsequently optimized and implemented in a multi-threaded manner.

Address of the bookmark: http://ml.ssu.ac.kr/gSearch/index.html