Most people who have a balanced translocation have the right amount of chromosome material but it has been rearranged in some way. This may happen if two chromosomes swap pieces (a reciprocal translocation). In other cases two whole chromosomes may become stuck together (a Robertsonian translocation). This page describes what happens when someone has a reciprocal translocation.

Reciprocal chromosomal translocations occur following double-strand breaks (DSBs) in DNA when a section of one chromosome is exchanged with that of another, non-homologous chromosome. These exchanges may produce a dysfunctional fusion gene that disrupts cell growth and survival pathways, such as the translocations seen in leukemia and childhood sarcomas.

Chromosomal translocations have been well studied in cancer cell lines which are associated with two types of cancer, acute myeloid leukemia and Ewing's sarcoma, but determining how they contribute to cancer development is complicated by additional mutations and altered gene expression profiles in these cultured cells. Now, Juan Carlos Ramirez, head of the Viral Vector Facility at the Fundacion Centro Nacional de Investigaciones Cardiovasculares (CNIC) and his colleagues Raul Torres at CNIC and Sandra Rodriguez-Peralez at the Spanish National Cancer Center (CNIO) in Madrid, Spain have used a new genome editing tool, CRISPR-Cas9, to induce chromosomal translocations for the first time in a human cell line and in primary cells. The study's authors conclude by stating that the use of this technology will allow for the clarification of how and why chromosomal translocation occurs, which without doubt will allow new anti-cancer therapeutic strategies to be tackled.

Using RNA-Guided Endonuclease (RGEN) technology or CRISPR/Cas9 genome engineering technology, CNIO and CNIC researchers have shown that it is possible to obtain such chromosomal translocations. The CRISPR-Cas9 system is extremely simple to introduce a cut at the desired locus, easier to design, and cheaper than many other systems. Using the CRISPR-Cas9 system, Ramirez and his colleagues reproduced the translocations observed in Ewing’s Sarcoma (ES) and Acute Myeloid Leukemia (AML) patient cell lines in HEK293 cells and also generated the ES translocation in human mesenchymal stem cells and the AML translocation in umbilical cord blood cells.

By focusing on chromosomal translocation without the confounding characteristics of established cell lines, these new cells lines should help answer the fundamental question of what causes a cell to become cancerous. Ramirez and his team now look forward to modeling other chromosome translocations in a variety of cell types.

Reference:

http://en.wikipedia.org/wiki/Chromosomal_translocation

http://www.nature.com/ncomms/2014/140603/ncomms4964/abs/ncomms4964.html

Awards of $5 million to four grantees have been made in fiscal year 2013 under the Genomic Sequencing and Newborn Screening Disorders research program. The program will be funded at $25 million over five years, as funds are made available.

"Hundreds of US babies will be pioneers in genomic medicine through a US$25-million programme to sequence their genomes soon after they are born."

Source:

http://blogs.nature.com/news/2013/09/scientists-to-sequence-hundreds-of-newborns-genomes.html

http://www.genome.gov/27554919

Brief description: We are looking for suitable candidates in the area o computational biology/bioinformatics/genomics or related field for next-generation sequencing (NGS) data analysis for small-RNAs, RNA-Seq and targeted resequencing of plants and associated organisms. We are an interdisciplinary group where projects equally involve bioinformatics and systems biology (specially microarrays and next-generation sequencing (NGS) data analysis and its use), along with plant molecular biology, genetic engineering, field biology, and analytical plant chemistry for understanding response of plants to biotic stresses.

Essential qualification: MSc/BTech/MTech/PhD (or other suitable qualification) in disciplines preferable to bioinformatics, computational biology, computer application (or equivalent)/ ‘Advance Post-Graduate Diploma in Bioinformatics’. Proficiency in programming languages (such as Perl, C++) and/or statistics (proficient in R for example) is compulsory.

Desirable qualification: Experience in the field of genomics e.g. microarray analysis, NGS, genome annotation, database development and management, software development, systems and network biology (or related fields) will be preferred.

Application process: Applications should contain CV along with brief description (maximum 1 page) of research conducted (highlighting skills and experience) till now. Applications should be sent by e-mail to Shree Prakash Pandey, Department of Biological Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur Campus, WB, India within 14 days of this advertisement.

E-mail: sppiiserkol@gmail.com, sppandey@iiserkol.ac.in

Advertisement:

http://www.iiserkol.ac.in/announcements/adverts/671-advt_ra_shree_prakash_july_2014

http://en.wikipedia.org/wiki/Sequence_assembly 

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0951-y

Address of the bookmark: https://sourceforge.net/projects/operasf/

Scientists with a long-running Framingham Heart Study looked at 1,932 people (examination of about 1.5 million markers of genetic variations), comparing unrelated friends to unrelated strangers. They found that friends shared about 1% of their genes — a percentage much higher than those shared with strangers.This new findings made it clear that people have more DNA in common with those who are selected as friends than with strangers in the same population. 

The genes that lined up the most were olfactory genes, which deal with smell. The ones that lined up the least were immune system genes. The researchers weren't sure why that happened :/. Olfactory genes might be a straightforward explanation: People who like the same smells tend to be drawn to similar environments, where they meet others with the same tendencies.

Reference:

http://www.pnas.org/content/111/Supplement_3/10796.full

Image : http://i.kinja-img.com

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Job Description: We are interested in finding an excellent postdoc with interests in protein functional annotation, machine learning and computer grids. The position is open for 3.5 years at the Université Pierre et Marie Curie, in the heart of paris.

Research topic: Protein function annotation, multiple probabilistic models, domain architecture, machine learning, combinatorial optimization, computer grid.

Title: A novel integrative platform for large scale protein annotation that exploits a multitude of diversified probabilistic models in several protein signature databases.

We propose a novel integrated approach for large scale protein annotation that will exploit an unprecedented amount of genomic data as well as sophisticated machine learning techniques and combinatorial optimization approaches taking advantages of High Performance Computing (HPC) environments. The idea is to uncover as much as possible the evolutionary processes of protein sequences that took place throughout the whole tree of life and that affected the evolution of a protein family. We have already demonstrated in a previous work that the problem of functional annotation is inherent to the ability of uncovering such paths. Now, we shall extend this approach to large scale genome annotation by considering 11 different protein databases, constituted by about 10^9 protein sequences, and by producing a large pool of diversified probabilistic models coding for about 10^7 evolutionary protein pathways. Such models will be used to search for specific domains in genomes to be annotated. Our previous methodology needs to be fundamentally improved to deal with this large amount of biological data. In this project, we shall work on the algorithms to reduce the space of models and the search complexity, and we shall implement some important algorithmic changes towards the realization of a powerful integrated annotation tool.

Where: This project is run on the Laboratoire de Biologie Computationnelle et Quantitative UMR7238 CNRS-UPMC – Analytical Genomics team, headed by A.Carbone. It is co-advised with Pierre-Henri Wuillemin, Laboratoire d’Informatique de Paris 6 – Equipe DECISION.

Start date: September 1st, 2014
Contact Person: Alessandra Carbone
Contact: alessandra.carbone@lip6.fr

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume.  NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

ROLLING ADVERTISEMENT NO. 01/2014(E-1)
ADVERTISEMENT FOR THE POSITIONS OF ASSISTANT PROFESSOR CANDIDATES CAN APPLY ANY TIME DURING THE YEAR.

IIT Delhi invites applications from qualified Indian Nationals, Persons of Indian Origin (PIOs) and Overseas Citizens of India (OCIs) for the following positions in the various Departments/Centres/Schools (in the fields
mentioned alongwith them):
Post Pay Band Assistant Professor and Assistant Professor (on Contract) Rs.15600-39100 (PB-3) (Minimum pay of Rs.30000/-)+ AGP Rs.8000/-

The following norms will be followed for fixing the basic pay + AGP for Assistant Professors appointed on
contract with Ph.D but experience of 3 years or less:-
Type Qualification & Experience on the date of joining
Assistant Professor (Contract) PB3 (Rs. 15,600-39,100).

MINIMUM QUALIFICATIONS AND EXPERIENCE:
Ph.D. with First class at the preceding degree or equivalent in the appropriate branch with very good academic record throughout. A minimum of three years industrial/research/teaching experience, excluding however, the experience gained while Pursuing Ph. D. The candidates should preferably be below
35 years of age for male and 38 years for female ( to be relaxed by 5 years in case of persons with physical disability, SC/ST and 3 years in case of OBC-NCL).

Qualified persons include:
(a) Indian Nationals,
(b) Foreign Nationals who are “Persons of Indian Origin” (PIO) or Overseas
Citizens of India (OCI), in whose case, if selected, permission will be sought from Govt. of India
before he/she can join IIT Delhi, or
(c) Other Foreign Nationals, in whose case, if selected, appointment will be on a contract basis for up to 5 (five) years subject to permission from the Govt. of India before he/she can join IIT Delhi.
(d) Institute specifically encourages applicants from SC/ST/OBC category as well as persons
with disability to apply for these positions.

AMAR NATH & SHASHI KHOSLA SCHOOL OF INFORMATION TECHNOLOGY:
Computational Neuroscience, Medical Applications of Information Technologies, Computational & Systems Biology, Machine to Machine (M2M) Technologies, Embedded Systems & Sensors, Computer Security.
KUSUMA SCHOOL OF BIOLOGICAL SCIENCES:
In-silico Biology Applications, Systems Biology, Infection Biology, Neurodegeneration.

More at http://www.iitd.ac.in/sites/default/files/jobs/faculty/spl-areas-rolling-advt.pdf

http://www.iitd.ac.in/content/faculty-positions