Salary: £27,854 - £29,541, with progression to £36,298

You will perform cutting edge computational biology within the Faculty of Medical Sciences, with a particular focus on the Northern Institute for Cancer Research (NICR), and contribute to the delivery of Faculty wide programmes of training, analytical services and skill transfer between Faculty Institutes.

You will have a relevant first degree or equivalent qualifications and/or experience in a relevant scientific/technical role, together with previous specialist experience at a senior level in bioinformatics. A PhD is desirable.

This position is part of the Bioinformatics Support Unit but physically located for the majority of the time in the NICR buildings.

Tenable for three years.

Informal enquiries to unit head Dr Simon Cockell: 0191 222 7253; simon.cockell@ncl.ac.uk

For more information visit @ https://www15.i-grasp.com/fe/tpl_newcastle02.asp?s=4A515F4E5A565B1A&jobid=50667,2552984041&key=70203469&c=725434237887&pagestamp=sepghtjhowdqpsxuyn

You can also find several other jobs @http://bsu.ncl.ac.uk/support/recruitment/

Parliament2 runs a combination of tools to generate structural variant calls on whole-genome sequencing data. It can run the following callers: Breakdancer, Breakseq2, CNVnator, Delly2, Manta, and Lumpy. Because of synergies in how the programs use computational resources, these are all run in parallel. Parliament2 will produce the outputs of each of the tools for subsequent investigation.

Address of the bookmark: https://github.com/dnanexus/parliament2

Functioning of efflux systems in Gram-negative bacteria
Determinants of the compound-efflux system interactions
Action of inhibitors on efflux systems
Structural and dynamical features of the efflux systems

TatA
Assembly of the TatA system
Study of the dynamical features of the charge zipper

Methods
Setup of a kinetic Monte Carlo (KMC) scheme to study the flux of antibiotics through porins and efflux systems
Setup of protocol to integrate MD results in a ligand-based approach

Viral inhibitors
Interactions of selected compounds with RNA-dependent RNA polymerases (RdRps) of HCV and BVDV
Assessment of the role of mutations in RdRps
Antimicrobial peptides

Interactions of antimicrobial peptides with membranes: structure and dynamics
Interactions between antimicrobial peptides in the presence of different membranes
Protein-protein interactions
Effects of mutations

Lab Page
http://www.dsf.unica.it/~paolo/Site/Home.html

Project Scientist-I
Experimental / Computation analysis experience in highthroughput genomics/ clinical application.

Project Manager
Experience in handling large biological projects involving high-throughput genomics/ clinical application.

Scientific Administrative Assistant
Lab Work.

More at https://vinodscaria.genomes.in/positionsopen

Genome Annotation and Functional Genomics

Bergman Lab is actively engaged in the development and application of computational methods to improve the annotation of functional biological features in genome sequences. Bergman Lab work focuses on improving annotation of non-protein-coding regions of the genome including conserved noncoding sequences (CNSs), cis-regulatory modules (CRMs), transcription factor binding sites (TFBSs), transposable elements (TEs) and noncoding RNA (ncRNA) genes. Current projects include improving the (i) annotation of TEs in the fly and yeast genomes, (ii) annotation of CRMs and TFBSs in the fly genome, and (iii) analysis of transposon knockout collections in flies. Research in this area is supported by the EC FP7 programme.

Genome and Molecular Evolution
Text and Data Mining

More @ http://bergmanlab.smith.man.ac.uk/

The "Ifs" of NGS QC and Trimming

1. Ensures Data Integrity
   If you want to minimize errors in downstream analyses, QC and trimming remove low-quality reads and bases, ensuring high-confidence data. This step is essential for reliable variant calling, assembly, and other applications.

2. Removes Contaminants
   If adapter sequences or contaminants are present in the raw reads, trimming can eliminate them. This prevents issues like misalignment or incorrect biological interpretations, ensuring cleaner data for analysis.

3. Improves Mapping and Assembly
   If your goal is better alignment to a reference genome or improved de novo assembly, trimming low-quality bases and adapters is critical. High-quality reads map more efficiently and generate more accurate assemblies.

4. Reduces Computational Load
   If you want to save computational resources, trimming reduces the dataset size, which speeds up processing and analysis. Clean datasets mean less computational time spent on processing low-quality data.

5. Prepares for Standardized Analyses
   If your project involves multiple datasets, QC and trimming ensure uniformity across them. This standardization makes comparisons valid and reproducible, particularly in large collaborative studies.

The "Buts" of NGS QC and Trimming

1. Risk of Over-Trimming
   But excessive trimming can lead to the loss of informative sequences, reducing read depth and potentially discarding biologically relevant data. This is especially critical in studies with limited sequencing depth.

2. Bias Introduction
   But trimming algorithms might introduce biases, especially if they inadvertently remove sequences with specific biological patterns. This can skew results and compromise biological insights.

3. Loss of Context in Paired-End Reads
   But trimming one read in a pair more than the other can lead to loss of pairing information. This complicates downstream analyses that rely on paired-end data, such as structural variant detection.

4. Time and Resource Intensive
   But running QC and trimming for large datasets can be computationally expensive and time-consuming. As sequencing depth increases, preprocessing becomes a bottleneck in the analysis pipeline.

5. Variable Standards
   But the criteria for trimming (e.g., quality threshold, minimum read length) can vary between tools and datasets. This variability may affect reproducibility and comparability of results across studies.

Balancing the "Ifs" and "Buts"

To maximize the benefits of QC and trimming while mitigating the challenges, consider the following best practices:

• Use QC Tools Wisely: Start with tools like FastQC to identify quality issues in your raw data. Visualizing quality metrics helps tailor your trimming parameters.

• Choose Reliable Trimming Tools: Tools like Trimmomatic, Cutadapt, and BBduk offer adaptive and customizable trimming options. Select one that aligns with your dataset and project goals.

• Set Reasonable Parameters: Avoid over-trimming by setting quality thresholds and minimum read lengths that balance data retention and quality improvement.

• Test Downstream Effects: Validate the impact of QC and trimming on downstream analyses, such as alignment efficiency, variant calling accuracy, or assembly quality.

• Document Your Workflow: Maintain detailed records of the parameters and tools used for QC and trimming. This ensures reproducibility and enables better troubleshooting.

Conclusion

NGS quality control and trimming are essential steps to ensure reliable and accurate data for analysis. While the "ifs" highlight the clear benefits of these steps, the "buts" remind us of the potential pitfalls. By adopting best practices and carefully balancing these considerations, you can optimize your preprocessing workflow and unlock the full potential of your sequencing data.

Nature Biotechnology spoke with Altschul and several other originators of computational biology software programs widely used today (Table 1). The conversations explored what makes certain software tools successful, the unique challenges of developing them for biological research and how the field of computational biology, as a whole, can move research agendas forward. What follows is an edited compilation of interviews.

Detail @ http://www.nature.com/nbt/journal/v31/n10/full/nbt.2721.html

News Source @ Nature

minimap -t 24 assembly.fasta long_reads.fastq.gz | racon -t 24 long_reads.fastq.gz - assembly.fasta racon_assembly.fasta
nucmer -p nucmer assembly.fasta racon_assembly.fasta
show-snps -C -T -r nucmer.delta

This reports Racon's changes in a table. You can exclude indels with the -I option in show-snps. 

This process (Racon -> MUMmer -> SNP table) solves the problem I originally raised in this issue. So as far as I'm concerned, you can close this issue (or keep it open if you still want to implement some kind of variant table).

No. of Posts and Specialization: 1(UR)

Educational Qualification:

(i) Good academic record with a Ph.D. Degree in the concerned /allied /relevant disciplines.

(ii) The Ph.D. Degree shall be a mandatory qualification for all candidates to be appointed as Associate Professor through direct recruitment.

(iii) A Master‟s Degree with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed).

(iv) A minimum of eight years of experience of teaching and /or research in an academic /research position equivalent to that of Assistant Professor in a University, College or Accredited Research Institution/Industry excluding the period of Ph.D research with evidence of published work and a minimum of 5 publications as books and /or research papers in refereed journals only/policy papers.

(v) Contribution to educations innovation, design of new curricula and courses and technology-mediated teaching learning process with evidence of having guided doctoral candidates and research students.

(vi) A minimum score as stipulated in the Academic Performance Indicator (API) based performance Based Appraisal System (PBAS), set out in this notification in as mentioned in the advertisement.

Send your application to the A.R (Estt.Teaching), M.D.University, Rohtak on or before December 23, 2013.

For more details: http://www.mdurohtak.ac.in/pdf/Notices_Pdf/new_notice/Teaching%20Vacancy%20%28ADVT.%20No.%20PR-54%20of%202013%29.pdf

Last Apply Date: 23 Dec 2013

A swift, versatile phylogenomic and high-throughput sequencing simulator https://jackalope.lucasnell.com

Address of the bookmark: https://github.com/lucasnell/jackalope