BOL: Related items

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

R Graphical Cookbook by Winston Chang

Abhimanyu Singh — Fri, 04 Nov 2016 12:50:30 -0500

R Graphical Cookbook by Winston Chang

A very nice book by Winston Chang for R ethusiast. The R code presented in these pages is the R code actually used to produce the Figures in the book. There will be differences compared to the code chunks shown in the text of the book, but in most cases the differences will be that these pages contain additional code to lay out multiple plots on a single "page".

The code presented for each figure is self-contained, i.e., all code required to produce the figure is included. This means that there is sometimes considerable overlap of code between several figures In some cases, it may be necessary to install an add-on package from CRAN to get the code to run.

More books at http://www.e-reading.club/bookreader.php/137370/C486x_APPb.pdf

sockeye

Jit — Fri, 17 Feb 2017 08:51:16 -0600

This sockeye software uses the Ensembl database project to import sequence and annotation information from several eukaryotic species. A user can additionally import their own custom sequence and annotation data. Individual annotation objects are displayed in Sockeye by using custom 3D models. Ensembl-derived and imported sequences can be analyzed by using a suite of multiple and pair-wise alignment algorithms. The results of these comparative analyses are also displayed in the 3D environment of Sockeye. By using the Java3D API to visualize genomic data in a 3D environment, we are able to compactly display cross-sequence comparisons. This provides the user with a novel platform for visualizing and comparing genomic feature organization.

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

Progressive Cactus

Jit — Tue, 17 Jan 2017 03:40:06 -0600

v0.0 by Glenn Hickey (hickey@soe.ucsc.edu)

Progressive Cactus is a whole-genome alignment package.

Requirements

git
gcc 4.2 or newer
python 2.7
wget
64bit processor and build environment
150GB+ of memory on at least one machine when aligning mammal-sized genomes; less memory is needed for smaller genomes.
Parasol or SGE for cluster support.
750M disk space

Instructions

IMPORTANT NOTE: Progressive Cactus does not presently support installation into paths that contain spaces. Until this is resolved, you can use a softlink as a workaround: ln -s "path with spaces" "installation path without spaces"

In the parent directory of where you want Progressive Cactus installed:

git clone git://github.com/glennhickey/progressiveCactus.git
cd progressiveCactus
git pull
git submodule update --init
make

It is also convenient to add the location of progressiveCactus/bin to your PATH environment variable. In order to run the included tools (ex hal2maf) in the submodules/ directory structure, first source progressiveCactus/environment to load the installed environment.

If any errors occur during the build process, you are unlikely to be able to use the tool. Please submit a GitHub issue so we can help out: not only will you help yourself, but others who wish to use the tool as well.

Note that all dependencies are also built and included in the submodules/ directory. This increases the size and build time but greatly simplifies installation and version management. The installation does not create or modify any files outside the progressiveCactus/ directory.

Address of the bookmark: https://github.com/glennhickey/progressiveCactus

bedtools

Jit — Fri, 24 Feb 2017 04:50:44 -0600

Collectively, the bedtools utilities are a swiss-army knife of tools for a wide-range of genomics analysis tasks. The most widely-used tools enable genome arithmetic: that is, set theory on the genome. For example, bedtools allows one tointersect, merge, count, complement, and shuffle genomic intervals from multiple files in widely-used genomic file formats such as BAM, BED, GFF/GTF, VCF. While each individual tool is designed to do a relatively simple task (e.g., intersect two interval files), quite sophisticated analyses can be conducted by combining multiple bedtools operations on the UNIX command line.

bedtools is developed in the Quinlan laboratory at the University of Utah and benefits from fantastic contributions made by scientists worldwide.

Address of the bookmark: http://bedtools.readthedocs.io/en/latest/index.html

Mapping NGS

Abhimanyu Singh — Tue, 02 May 2017 07:58:07 -0500

NGS data are just a bunch of sequences, you have no idea which region in the genome each sequences comes from, which gene it represents...
To know that you have to align the sequences to the reference sequence. The reference sequence is in most cases the full genome sequence but sometimes, a library of EST sequences is used.
In either way, aligning your sequence reads to the reference sequence is called mapping.

The most used mappers of DNA-seq data are BWA and Bowtie for DNA-Seq data and Tophat, STAR or HISAT for RNA-Seq data. Mappers differ in which options they can take in, how fast and how accurate they are. Bowtie is faster than BWA, but looses some sensitivity (does not map an equal amount of reads to the correct position in the genome).

Address of the bookmark: http://wiki.bits.vib.be/index.php/Mapping_of_NGS_data

Prokka: tool for the rapid annotation of prokaryotic genomes

Jit — Mon, 06 Mar 2017 03:49:57 -0600

Prokka is a software tool for the rapid annotation of prokaryotic genomes. A typical 4 Mbp genome can be fully annotated in less than 10 minutes on a quad-core computer, and scales well to 32 core SMP systems. It produces GFF3, GBK and SQN files that are ready for editing in Sequin and ultimately submitted to Genbank/DDJB/ENA.

Address of the bookmark: http://www.vicbioinformatics.com/software.prokka.shtml

COCACOLA (binning metagenomic contigs using sequence COmposition, read CoverAge, CO-alignment, and paired-end read LinkAge)

Jit — Tue, 07 Mar 2017 08:50:57 -0600

COCACOLA is a general framework that combines different types of information: sequence COmposition, CoverAge across multiple samples, CO-alignment to reference genomes and paired-end reads LinkAge to automatically bin contigs into OTUs. Furthermore, COCACOLA seamlessly embraces customized prior knowledge to facilitate binning accuracy.

News: Python version of COCACOLA is available now!

Address of the bookmark: https://github.com/younglululu/COCACOLA

Multigenome assembly

Jit — Tue, 14 Mar 2017 04:41:23 -0500

This project contains scripts and tutorials on how to assemble individual microbial genomes from metagenomes, as described in:

Genome sequences of rare, uncultured bacteria obtained by differential coverage binning of multiple metagenomes

Mads Albertsen, Philip Hugenholtz, Adam Skarshewski, Gene W. Tyson, Kåre L. Nielsen and Per .H. Nielsen

Nature Biotechnology 2013, doi: 10.1038/nbt.2579

See the associated online guide for detailed information.

https://github.com/MadsAlbertsen/multi-metagenome

Address of the bookmark: https://github.com/MadsAlbertsen/multi-metagenome

Download assemblies from NCBI

Bulbul — Mon, 15 May 2017 06:02:32 -0500

A new “Download assemblies” button is now available in the Assembly database. This makes it easy to download data for multiple genomes without having to write scripts.

For example, you can run a search in Assembly and use check boxes (see left side of screenshot below) to refine the set of genome assemblies of interest. Then, just open the “Download assemblies” menu, choose the source database (GenBank or RefSeq), choose the file type, and start the download. An archive file will be saved to your computer that can be expanded into a folder containing your selected genome data files.

More at https://ncbiinsights.ncbi.nlm.nih.gov/2017/05/08/genome-data-download-made-easy/