BOL: Related items

RACA: Reference-Assisted Chromosome Assembly

Priya Singh — Wed, 06 Apr 2016 09:29:50 -0500

Rreference-Assisted Chromosome Assembly (RACA), an algorithm to reliably order and orient sequence scaffolds generated by NGS and assemblers into longer chromosomal fragments using comparative genome information and paired-end reads.

http://www.ncbi.nlm.nih.gov/pubmed/23307812

http://bioen-compbio.bioen.illinois.edu/RACA/

Address of the bookmark: http://bioen-compbio.bioen.illinois.edu/RACA/

DISCOVAR

Abhimanyu Singh — Mon, 18 Apr 2016 11:59:16 -0500

DISCOVAR is a new variant caller and DISCOVAR de novo a new genome assembler, both designed for state-of-the-art data. Their inputs are chosen to optimize quality while keeping costs low. Currently it takes as input Illumina reads of length 250 or longer — produced on MiSeq or HiSeq 2500 — and from a single PCR-free library. These data enable a level of completeness and continuity that was not previously possible.

DISCOVAR can call variants on a region by region basis, potentially tiling an entire large genome. DISCOVAR variant calling is under active development and transitioning to VCF.

DISCOVAR de novo can generate de novo assemblies for both large and small genomes. It currently does not call variants.

More at https://www.broadinstitute.org/software/discovar/blog/?page_id=14

Address of the bookmark: https://www.broadinstitute.org/software/discovar/blog/

Blobology

Jit — Mon, 13 Jun 2016 10:18:33 -0500

Tools for making blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step

Blaxter Lab, Institute of Evolutionary Biology, University of Edinburgh

Goal: To create blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step.

This repository accompanies the paper:
Blobology: exploring raw genome data for contaminants, symbionts and parasites using taxon-annotated GC-coverage plots. Sujai Kumar, Martin Jones, Georgios Koutsovoulos, Michael Clarke, Mark Blaxter
(submitted 2013-10-01 to Frontiers in Bioinformatics and Computational Biology special issue : Quality assessment and control of high-throughput sequencing data).

It contains bash/perl/R scripts for running the analysis presented in the paper to create a preliminary assembly, and to create and collate GC content, read coverage and taxon annotation for the preliminary assembly, which can be visualised, such as Figure 2a from the paper showing TAGC plots/blobplots for Caenorhabditis sp. 5:

Address of the bookmark: https://github.com/blaxterlab/blobology

HGA

Jit — Tue, 29 Nov 2016 07:25:53 -0600

HGA tool version 1.0 This tool helps to apply the Hierarchical Genome Assembly (HGA) method. The tool will apply: 1. Partitioning a given reads dataset into a given number of partitions. 2. Assembling each partitions using a pre-specified assembler (Velvet or SPAdes in this version) and using a given kmer size. 3. Merging all the assemblies of the partition. 4. Combining all the assemblies of the partition (using velvet with kmer value of 31). 5. Finaly, re-assembling the whole dataset with the merged contigs or the combined contigs, using a given kmer size.

https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Address of the bookmark: https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Mercator

Jit — Mon, 06 Feb 2017 04:20:36 -0600

Our basic strategy in building homology maps is to use exons that are orthologous in multiple genomes as map "anchors." Given K genomes, the steps in the map construction are as follows:

For each genome, obtain a set of exon annotations. These annotations can be a combination of both exon predictions (e.g. Genscan) and annotations that have been experimentally verified (e.g. RefSeq). Ideally, we would like to have these annotations be as sensitive as possible. Specificity is not a concern, as incorrect annotations are not likely not have significant alignments with other gene annotations.
Compare all exons against all exons in other genomes and record significant alignments between exons. Currently, we use BLAT to do this all-vs-all comparison with alignments being performed in protein space.
Construct a graph with each vertex corresponding to a exon and edges between vertices whose corresponding exons have significant alignments.
Identify cliques in this graph. These cliques are potential anchors to be used in the map.
Starting with the largest cliques (those that have exons in all or most of the genomes), join neighboring (adjacent in genomic coordinates, in each genome) cliques to form runs. Smaller cliques that are inconsistent with runs formed by larger cliques are filtered out. After the smallest cliques have been considered, cliques that are not part of a run are discarded.
The extents of each run in each genome are outputted as orthologous segments. The cliques from each run are used to output the exact genomic coordinates of anchors within each orthologous segment. These anchors can be used by genomic alignment programs (such as MAVID) to do a detailed alignment of each orthologous segment.

https://www.biostat.wisc.edu/~cdewey/mercator/

Address of the bookmark: https://www.biostat.wisc.edu/~cdewey/mercator/

J-Circos

Shruti Paniwala — Fri, 17 Feb 2017 09:06:54 -0600

Circos plot tool (J-Circos) that is an interactive visualization tool that can plot Circos figures, as well as being able to dynamically add data to the figure, and providing information for specific data points using mouse hover display and zoom in/out functions. J-Circos uses the Java computer language to enable it to be used on most operating systems (Windows, MacOS, Linux). Users can input data into J-Circos using flat data formats, as well as from the GUI. J-Circos will enable biologists to better study more complex chromosomal interactions and fusion transcripts that are otherwise difficult to visualize from next-generation sequencing data.

Address of the bookmark: http://www.australianprostatecentre.org/research/software/jcircos

DIAL

Abhimanyu Singh — Wed, 01 Mar 2017 08:42:28 -0600

A computational pipeline for identifying single-base substitutions between two closely related genomes without the help of a reference genome. DIAL works even when the depth of coverage is insufficient for de novo assembly, and it can be extended to determine small insertions/deletions. Our main motivation is to use this tool to survey the genetic diversity of endangered species as the identified sequence differences can be used to design genotyping arrays to assist in the species' management.

http://www.bx.psu.edu/~ratan/

Address of the bookmark: http://www.bx.psu.edu/miller_lab/

CLgenomics

Radha Agarkar — Fri, 03 Mar 2017 09:57:28 -0600

CLgenomics is a standalone desktop software specifically designed for bacterial genome analysis. This program has a powerful multi-genome browser, which enables rapid and responsive exploration of bacterial genomes.

To use CLgenomics, individual genome data (genome sequences + annotation details) are compiled and saved in a specially formatted file called CLG (ChunLab Genomics). Each CLG file corresponds with one bacterial genome. If multiple genomes are being considered and compared, multiple CLG files are needed. ChunLab offers >40,000 CLG files of publicly available Bacterial and Archaeal genomes.

Address of the bookmark: https://chunlab.wordpress.com/clgenomics-software/

Pacbio Long Reads Compatible Software and Tools

Archana Malhotra — Wed, 15 Mar 2017 14:19:01 -0500

The following software packages are known to be compatible with PacBio® data, in addition to PacBio's own SMRT® Analysis suite. All packages are believed to be open source or freely available for non-commercial use. See the individual project sites for up-to-date license information. A separate page lists commercial software.

Know of any other open source software for PacBio data? Email us.

Software categories:

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

DeCoSTAR - Detection of Co-evolution

Jit — Fri, 14 Apr 2017 06:27:25 -0500

DeCoSTAR is a software which aims at reconstructing ancestral gene or genome organizations, in the form of sets of neighborhood relations -adjacencies- between pairs of ancestral genes or gene domains.
Ancestral genes or domains are deduced from reconciled gene trees in a context of birth, speciation, duplication, loss, transfer, which are either given as input or computed with the ecceTERA package, to which DeCoSTAR is integrated. DeCoSTAR constructs parsimonious scenarios of gains and breakages of adjacencies, and contains in particular all the features of previous software DeCo, DeCoLT, ArtDeCo and DeClone. It provides statistical supports on ancestral adjacencies, or the possibility to handle badly assembled genomes.
DeCoSTAR is able to reconstruct the histories of domains inside genes, including gene fusion and fission events, as well as ancestral genome structures for dozens of whole genomes from all kingdoms of life in a few minutes.

Address of the bookmark: http://pbil.univ-lyon1.fr/software/DeCoSTAR/