Our work is published in Scientific Reports:

Ye, C. et al. DBG2OLC: Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies. Sci. Rep. 6, 31900; doi: 10.1038/srep31900 (2016).

http://www.nature.com/articles/srep31900

The manual can be downloaded from:

https://github.com/yechengxi/DBG2OLC/raw/master/Manual.docx

To use precompiled versions,please go to:

https://github.com/yechengxi/DBG2OLC/tree/master/compiled

Address of the bookmark: https://github.com/yechengxi/DBG2OLC

Address of the bookmark: https://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE

https://salzberg-lab.org/

We describe a new method for predicting the ancestral order and orientation of those intervals from their observed adjacencies in modern species. We combine the results from this method with data from chromosome painting experiments to produce a map of an early mammalian genome that accounts for 96.8% of the available human genome sequence data. The precision is further increased by mapping inversions as small as 31 bp. Analysis of the predicted evolutionary breakpoints in the human lineage confirms certain published observations but disagrees with others. Although only a few mammalian genomes are currently sequenced to high precision, our theoretical analyses and computer simulations indicate that our results are reasonably accurate and that they will become highly accurate in the foreseeable future. Our methods were developed as part of a project to reconstruct the genome sequence of the last ancestor of human, dogs, and most other placental mammals;

Address of the bookmark: http://www.bx.psu.edu/miller_lab/car/

Classificier of reads from metagenomic sequencing experiments.

•  Kawulok, J., Deorowicz, S., CoMeta: Classification of Metagenomes Using k-mers, PLOS ONE, 2015; 10(4):1–23,

CoMSA

Compressor of multiple sequence alignments of proteins.

•  Deorowicz, S., Walczyszyn, J., Debudaj-Grabysz, A., CoMSA: compression of protein multiple sequence alignment files, Bioinformatics, 2019; 35(2):22–234,

DSRC

Compressor of sequencing reads.

•  Roguski, L., Deorowicz, S., DSRC 2: Industry-oriented compression of FASTQ files, Bioinformatics, 2014; 30(15):2213–2215,
•  Deorowicz, S., Grabowski, Sz., Compression of DNA sequences in FASTQ format, Bioinformatics, 2011; 27(6):860–862,

FAMSA

Multiple sequence alignment designed for huge families of proteins (even containing hundreds of thousands of sequences).

•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., FAMSA: Fast and accurate multiple sequence alignment of huge protein families, Scientific Reports, 2016; 6(33964):

FaStore

Compressor of FASTQ files.

•  Roguski, L., Ochoa, I., Hernaez, M., Deorowicz, S., FaStore - a space-saving solution for raw sequencing data, Bioinformatics, 2018; 34(16):2748–2756,

FQSqueezer

Experimental high-end compressor of FASTQ files.

•  Deorowicz, S., FQSqueezer: k-mer-based compression of sequencing data, Scientific Reports, 2020; 10(578):

GDC

Compressor of collections of genome sequences.

•  Deorowicz, S., Danek, A., Niemiec, M., GDC 2: Compression of large collections of genomes, Scientific Reports, 2015; 5(11565):1–12,
•  Deorowicz, S., Grabowski, Sz., Robust relative compression of genomes with random access, Bioinformatics, 2011; 27(21):2979–2986,

GTC

Genotype databases compressor with support for fast queries.

•  Danek, A., Deorowicz, S., GTC: how to maintain huge genotype collections in a compressed form, Bioinformatics, 2018; 34(11):1834–1840,

GTShark

Genotypes compressor.

•  Deorowicz, S., Danek, A., GTShark: Genotype compression in large projects, Bioinformatics, 2019; 35(22):4791–4793,

KMC

Memory frugal k-mer counter.

•  Kokot, M., Długosz, M., Deorowicz, S., KMC 3: counting and manipulating k -mer statistics, Bioinformatics, 2017; 33(17):2759–2761,
•  Deorowicz, S., Kokot, M., Grabowski, Sz., Debudaj-Grabysz, A., KMC 2: Fast and resource-frugal k-mer counting, Bioinformatics, 2015; 31(10):1569–1576,
•  Deorowicz, S., Debudaj-Grabysz, A., Grabowski, Sz., Disk-based k-mer counting on a PC, BMC Bioinformatics, 2013; 14():Article no. 160,

Kmer-db

Tool for estimation of evolutionary distances in a collection of genomes.

•  Deorowicz, S., Gudys, A., Dlugosz, M., Kokot, M., Danek, A., Kmer-db: instant evolutionary distance estimation, Bioinformatics, 2019; 35(1):133–136,

MuGI

Index allowing queries for a collection of multiple genome sequences.

•  Danek, A., Deorowicz, S., Grabowski, Sz., Indexes of Large Genome Collections on a PC, PLOS ONE, 2014; 9(10):e109384,

ORCOM

Experimental compressor of sequencing reads.

•  Grabowski, Sz., Deorowicz, S., Roguski, L., Disk-based compression of data from genome sequencing, Bioinformatics, 2014; 31(9):1389–1395,

PgSA

Index allowing queries for a collection of sequencing reads.

•  Kowalski, T., Grabowski, Sz., Deorowicz, S., Indexing arbitrary-length k-mers in sequencing reads, PLOS ONE, 2015; 10(7):1–16,

QuickProbs

Multiple sequence alignment designed especially for GPU.

•  Gudys, A., Deorowicz, S., QuickProbs 2: towards rapid construction of high-quality alignments of large protein families, Scientific Reports, 2017; 7(41553):
•  Gudys, A., Deorowicz, S., QuickProbs – A Fast Multiple Sequence Alignment Algorithm Designed for Graphics Processors, PLOS ONE, 2014; 9(2):e88901,

RECKONER

Read error corrector.

•  Maciej Długosz, M., Deorowicz, S., RECKONER: read error corrector based on KMC, Bioinformatics, 2017; 33(7):1086–1089,

TGC

Compressor of collections of genomes given in Variant Call Format (VCF) files.

•  Deorowicz, S., Danek, A., Grabowski, Sz., Genome compression: a novel approach for large collections, Bioinformatics, 2013; 29(20):2572–2578,

VCFShark

Compressor of VCF files.

•  Deorowicz, S., Danek, A., GTShark: Genotype compression in large projects, biorxiv.org, 2020; ():

Whisper

Experimental mapper of whole genome sequencing data.

•  Deorowicz, S., Gudys, A., Whisper 2: indel-sensitive short read mapping, bioRxiv.org, 2019; :
•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., Grabowski, Sz., Whisper: read sorting allows robust robust mapping of DNA sequencing data, Bioinformatics, 2019; 35(12):2043–2050,
•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., Grabowski, Sz., Robust mapping of whole genome sequencing data, Poster at The Biology of Genomes Conference, 2017;

National Bioinformatics Infrastructure Sweden (NBIS) (nbis.se) plays an important role in advancing life science research in Sweden by providing expert support and developing cutting-edge bioinformatics infrastructure. Operating as a truly national initiative, NBIS employs more than 120 bioinformaticians, system developers, and data stewards across multiple locations in Sweden. It serves as the bioinformatics platform at SciLifeLab, a national resource that facilitates research in molecular biosciences by offering access to state-of-the-art technologies and technical expertise. With strong ties to data-producing facilities and ongoing collaborations with leading research groups, NBIS is ideally positioned to support world-class bioinformatics analyses. Furthermore, NBIS is the Swedish node in ELIXIR, the European infrastructure for biological information.

NBIS is seeking an experienced bioinformatician to support both Swedish and international projects. As part of our dynamic team, you will work closely with researchers to process large-scale biological data and contribute to advancing our data analysis infrastructure. Strong problem-solving skills, attention to detail, and the ability to troubleshoot complex bioinformatics pipelines are essential for success in this role. Flexibility and a willingness to learn are also important, as NBIS continually adapts to meet the evolving needs of the Swedish research community.

More at https://www.uu.se/en/about-uu/join-us/jobs-and-vacancies/job-details?query=778701

Identify pairs of contigs that are syntenic and move one of them to the haplotig 'pool'. The pipeline uses mapped read coverage and Minimap2 alignments to determine which contigs to keep for the haploid assembly. Dotplots are optionally produced for all flagged contig matches, juxtaposed with read-coverage, to help the user determine the proper assignment of any remaining ambiguous contigs. The pipeline will run on either a haploid assembly (i.e. Canu, FALCON or FALCON-Unzip primary contigs) or on a phased-diploid assembly (i.e. FALCON-Unzip primary contigs + haplotigs). Here are two examples of how Purge Haplotigs can improve a haploid and diploid assembly.

Address of the bookmark: https://bitbucket.org/mroachawri/purge_haplotigs

Address of the bookmark: https://github.com/Magdoll/Cogent

MitoHiFi was first developed to assemble the mitogenomes for a wide range of species in the Darwin Tree of Life Project (DToL)

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-023-05385-y 

Address of the bookmark: https://github.com/marcelauliano/MitoHiFi