What is RNA-Seq?

RNA-Seq is a next-generation sequencing (NGS) technology used to study the transcriptome—the complete set of RNA molecules in a cell. It quantifies gene expression, detects novel transcripts, and captures alternative splicing events with high sensitivity and resolution.

Workflow for RNA-Seq Analysis

RNA-Seq analysis involves several stages, each requiring computational tools and expertise.

1. Experimental Design and Data Acquisition

Before diving into analysis, bioinformaticians should consider:

• Biological Replicates: Ensure statistical power to detect meaningful differences.
• Sequencing Depth: Align sequencing depth to study objectives (e.g., higher depth for low-abundance transcripts).
• Paired-End vs. Single-End: Paired-end sequencing provides more detailed information on transcript structure.

Once sequencing is complete, raw data is provided in FASTQ format, containing sequence reads and quality scores.

2. Quality Control and Preprocessing

Quality control (QC) ensures data integrity. Tools such as FastQC evaluate metrics like base quality, GC content, and adapter contamination.

Preprocessing Steps:

• Trimming: Tools like Trimmomatic or Cutadapt remove low-quality bases and adapter sequences.
• Filtering: Discard reads below a certain quality threshold or length.

3. Read Alignment

Reads are mapped to a reference genome or transcriptome to determine their origin. Alignment tools include:

• HISAT2: Handles large genomes efficiently and supports spliced alignments.
• STAR: High-speed aligner optimized for RNA-Seq.
• Bowtie2: Suitable for short-read alignment.

Output: A SAM/BAM file containing aligned reads.

4. Transcript Assembly and Quantification

This step involves identifying transcripts and quantifying their expression levels. Tools used include:

• StringTie: Assembles and quantifies transcripts from aligned reads.
• Salmon/Kallisto: Perform pseudo-alignment for rapid and accurate quantification.

Expression levels are typically measured as TPM (transcripts per million) or FPKM (fragments per kilobase of transcript per million mapped reads).

5. Differential Expression Analysis

To identify genes with altered expression between conditions, bioinformaticians use tools such as:

• DESeq2: Accounts for data normalization and variability.
• edgeR: Handles overdispersed count data efficiently.
• Limma-voom: Combines linear modeling with RNA-Seq count data.

The output includes a list of differentially expressed genes (DEGs) with statistical significance and fold-change values.

6. Functional Annotation and Pathway Analysis

Understanding the biological significance of DEGs involves:

• Gene Ontology (GO) Analysis: Tools like DAVID or clusterProfiler categorize genes based on their biological functions.
• Pathway Enrichment Analysis: Identifies pathways enriched in DEGs using tools like KEGG, Reactome, or GSEA.

7. Visualization

Visualizing results enhances interpretability. Common visualizations include:

• Heatmaps: Show expression patterns across samples (e.g., pheatmap).
• Volcano Plots: Highlight significant DEGs (e.g., ggplot2).
• PCA/UMAP: Assess sample clustering and variability (e.g., Seurat).

Challenges in RNA-Seq Analysis

1. Batch Effects: Technical variability can confound biological signals. Combat this with normalization techniques or batch-correction tools like ComBat.
2. Low-Quality Samples: Poor-quality RNA impacts downstream analyses.
3. Computational Complexity: RNA-Seq generates massive datasets, requiring robust computing resources and optimized pipelines.

Key Tools and Resources

• Bioconductor: A treasure trove of R packages for RNA-Seq analysis.
• Galaxy: A web-based platform for running RNA-Seq workflows.
• Nextflow/Snakemake: Workflow management tools to streamline analyses.

Applications of RNA-Seq

RNA-Seq is used in diverse research areas, including:

• Cancer Transcriptomics: Identifying tumor-specific expression profiles.
• Developmental Biology: Studying dynamic transcriptome changes.
• Drug Discovery: Screening genes modulated by therapeutic compounds.

Conclusion

RNA-Seq analysis is a cornerstone of modern transcriptomics, offering bioinformaticians a versatile toolkit for unraveling gene expression and regulation. Mastering RNA-Seq workflows and tools empowers researchers to transform raw sequencing data into biological discoveries.

Whether you’re investigating disease mechanisms, exploring cellular pathways, or developing new therapeutics, RNA-Seq is a powerful ally in your bioinformatics arsenal.

Address of the bookmark: https://ics.hutton.ac.uk/strudel/

Address of the bookmark: http://www.bioconductor.org/packages/release/bioc/html/GeneBreak.html

List of analysis tools developed for Oxford Nanopore data

BWA
Fast nanopore data tuned alignment tool
https://github.com/lh3/bwa

GraphMap
Mapper for long and error-prone reads
https://github.com/isovic/graphmap

LAST
Nanopore tuned alignment tool
http://last.cbrc.jp/

LINKS
Software tool for long read scaffolding
https://github.com/warrenlr/LINKS/

marginAlign
Tools to align nanopore reads to a reference
https://github.com/benedictpaten/marginAlign

minoTour
Real time analysis tools
http://minotour.nottingham.ac.uk/

nanoCORR
Error-correction tool for nanopore sequence data
https://github.com/jgurtowski/nanocorr

NanoOK
Software for nanopore data, quality and error profiles
https://documentation.tgac.ac.uk/display/NANOOK/NanoOK

Nanopolish
Nanopore analysis and genome assembly software
https://github.com/jts/nanopolish

nanopore
Variant-detection tool for nanopore sequence data
https://github.com/mitenjain/nanopore

Nanocorrect
Error-correction tool for nanopore sequence data
https://github.com/jts/nanocorrect/

npReader
Real-time conversion and analysis of nanopore reads
https://github.com/mdcao/npReader

poRe
Tool for analyzing and visualizing nanopore data
https://sourceforge.net/p/rpore/wiki/Home/

PoreSeq
Error-correction and variant-calling software
https://github.com/tszalay/poreseq

Poretools
Nanopore sequence analysis and visualization software
https://github.com/arq5x/poretools

SSPACE-LongRead
Genome scaffolding tool
http://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE-longread

SMIS
Genome scaffolding tool
https://sourceforge.net/projects/phusion2/files/smis/

List of assemblers for Oxford Nanopore MinION long reads

LQS
DALIGNER, Celera OLC Nanocorrect,
Nanopolish corrector
https://github.com/jts/nanopolish

PBcR
HGAP or BLASR, Celera OLC
PBcR corrector
http://wgs-assembler.sourceforge.net/wiki/index.php/PBcR
–
Canu
MHAP, Celera OLC
Canu corrector
https://github.com/marbl/canu

Falcon
String graph, Celera OLC
Falcon corrector
https://github.com/PacificBiosciences/falcon

Miniasm
OLC
https://github.com/lh3/miniasm

ra-integrate
OLC
https://github.com/mariokostelac/ra-integrate/

ALLPATHS-LG
de Bruijn graph
ALLPATHS-L corrector
https://www.broadinstitute.org/software/allpaths-lg/blog/?page_id=12

SPAdes
de Bruijn graph
SPAdes corrector
http://bioinf.spbau.ru/spades

If you are interested in gene prediction, have a look at GenomeThreader.

Address of the bookmark: http://genometools.org/

https://function.princeton.edu/

Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

1. Prepare a reference sequence (ref.fasta). Better a bacterial genome.
2. Download maq, maq-data and maqview at the download page.
3. Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
4. Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:

   maq.pl demo ref.fasta calib-30.dat
   

   where calib-30.dat is contained in maq-data.
5. View the alignment:

   cd maqdemo/easyrun;
   maqindex -i -c consensus.cns all.map;
   maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net

More at https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-03666-4

Address of the bookmark: https://github.com/aghozlane/shaman

Structural variants (SVs) such as deletions, insertions, duplications, inversions and translocations litter genomes and are often associated with gene expression changes and severe phenotypes (ie. genetic diseases in humans). Recent studies on the functional aspects of different types of SVs have unveiled several cases of adaptive evolution. For example, inversions have been associated with ecological adaptations and may facilitate speciation. Due to their prevalent nature, SVs arguably have a large impact on genome evolution and should not be neglected when studying the genetics of adaptation and speciation. SVs were classically defined as chromosomal rearrangements larger than 1kb, but due to a higher resolution of new detection methods, smaller variants (between 50 and 1000 base pairs) can now be accurately assessed. Besides various methods of detection in next generation sequencing data (paired end mapping, split reads, and depth of coverage), array-based approaches have proven to be particularly useful for detecting copy number variations (CNVs). These technologies have enabled researchers to catalog a wide spectrum of SVs in many organisms and infer the effects of selection shaping their evolutionary trajectories.

Structure variation sequencing signature (Source: NatRev Genetics)

Related tools, databases and publications are listed below. If you know any interesing papers, please let us know in comment section:

Key concepts

Structural variation includes balanced variants such as inversions and translocations, and unbalanced ones such as duplications and deletions (copy number variations or CNVs).

Structural variants can arise by several mechanisms, including nonallelic homologous recombination (NAHR), nonhomologous end‐joining (NHEJ) and DNA replication‐based fork stalling and template switching (FoSTeS).

CNV is closely linked to segmental duplication, but is not exactly the same. Segmental duplications can stimulate CNV formation by NAHR, and themselves arise from CNVs that have become fixed.

Segmental duplications did not appear uniformly during the evolution of the Great Ape species, but rather during a burst of activity around the time of the divergence of gorilla from the human/chimpanzee ancestor.

Duplicated genes play a critical role in the evolution of a genome as they act as ‘spare parts’ than can evolve to perform new or more specialized functions.

Effects of structural variation on gene expression can be identified but only a few examples of the consequences for species biology have been documented.

Tools

CNVnatora tool for CNV discovery and genotyping from depth of read mapping.2011a,2011b

AGEa tools that implements an algorithm for optimal alignment of sequences with SVs.2011

BreakSeqa pipeline for annotation, classification and analysis of SVs at single nucleotide resolution.2010

PEMera computational and simulation framework for discovering SVs by paired-end read mapping.2009,2007

GASV https://code.google.com/archive/p/gasv/

PAIROSCOPE http://pairoscope.sourceforge.net/

SVDetect http://svdetect.sourceforge.net/Site/Home.html

BreakPtr, discovery of unbalanced structural variants (copy-number variants) with tiling microarrays Link 

R Package https://www.bioconductor.org/help/course-materials/2010/EMBL2010/Practical-4-StructuralVariants.pdf

BreakSeq, structural variant genotyping using split reads Link 

CopySeq, genotyping of unbalanced structural variants (copy-number variants) using read-depth Link 

DELLY2, integrated structural variant discovery, genotyping and visualization in deep sequencing data Link 

PEMer, structural variant discovery in 454 sequencing data by paired-end mapping Link 

TIGER, transduction inference in germline genomes using short read data Link 

MANTA https://github.com/Illumina/manta

SV-Bay https://github.com/InstitutCurie/SV-Bay

BreakDancer http://breakdancer.sourceforge.net/

Variation Hunter http://compbio.cs.sfu.ca/software-variation-hunter

Lumpy https://github.com/arq5x/lumpy-sv

ForestSV http://sebatlab.ucsd.edu/index.php/software-data 

PBSuites for long reads https://sourceforge.net/projects/pb-jelly/

Visualization

The SV visualization tool: http://genomesavant.com/savant/

InGAP-SV (http://ingap.sourceforge.net/) that is nice tools for both detection and visualisation of severals kind of structural variations (Large insertions, translocation, deletion, inversions....) 

Tools table: http://www.nature.com/nbt/journal/v29/n8/fig_tab/nbt.1904_T2.html

Variation Viewer https://www.ncbi.nlm.nih.gov/variation/view/

Papers

http://www.nature.com/nmeth/journal/v9/n2/full/nmeth.1858.html

http://journal.frontiersin.org/researchtopic/1412/structural-variations-in-genomes-ecological-and-evolutionary-implications

http://www.mi.fu-berlin.de/wiki/pub/ABI/GenomicsLecture10Materials/structural-variation.pdf

http://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-015-1479-3

https://www.ncbi.nlm.nih.gov/dbvar/content/overview/

http://www.nature.com/subjects/structural-variation

https://eichlerlab.gs.washington.edu/news/NatMeth_Feb2012.pdf

https://www.ncbi.nlm.nih.gov/pubmed/19477992 ***

https://www.ncbi.nlm.nih.gov/pubmed/22452995

http://biorxiv.org/content/early/2016/09/06/073833

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4479793/

http://www.nature.com/articles/srep18501

http://www.genetics.org/content/202/1/351

http://www.cs.cmu.edu/~sssykim/teaching/s13/slides/Lecture_SVI.pdf

https://www.omicsonline.org/open-access/structural-variation-detection-from-next-generation-sequencing-2469-9853-S1-007.php?aid=69055

http://schatzlab.cshl.edu/presentations/2016/2016.01.12.PAG.Structural%20Variations.pdf

• paired-end (PE) and/or mate-pair libraries (NGS-based mode)
• long reads (NGS-based mode)
• synteny to the genome of some related species (reference-based mode)

Scaffolding 

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

• matches not satisfying cut-offs (--identity and --overlap)
• suboptimal matches (only best match of each query to reference is kept)
• and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

• Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
• pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
• pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
• pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
• Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf