What is RNA-Seq?

RNA-Seq is a next-generation sequencing (NGS) technology used to study the transcriptome—the complete set of RNA molecules in a cell. It quantifies gene expression, detects novel transcripts, and captures alternative splicing events with high sensitivity and resolution.

Workflow for RNA-Seq Analysis

RNA-Seq analysis involves several stages, each requiring computational tools and expertise.

1. Experimental Design and Data Acquisition

Before diving into analysis, bioinformaticians should consider:

• Biological Replicates: Ensure statistical power to detect meaningful differences.
• Sequencing Depth: Align sequencing depth to study objectives (e.g., higher depth for low-abundance transcripts).
• Paired-End vs. Single-End: Paired-end sequencing provides more detailed information on transcript structure.

Once sequencing is complete, raw data is provided in FASTQ format, containing sequence reads and quality scores.

2. Quality Control and Preprocessing

Quality control (QC) ensures data integrity. Tools such as FastQC evaluate metrics like base quality, GC content, and adapter contamination.

Preprocessing Steps:

• Trimming: Tools like Trimmomatic or Cutadapt remove low-quality bases and adapter sequences.
• Filtering: Discard reads below a certain quality threshold or length.

3. Read Alignment

Reads are mapped to a reference genome or transcriptome to determine their origin. Alignment tools include:

• HISAT2: Handles large genomes efficiently and supports spliced alignments.
• STAR: High-speed aligner optimized for RNA-Seq.
• Bowtie2: Suitable for short-read alignment.

Output: A SAM/BAM file containing aligned reads.

4. Transcript Assembly and Quantification

This step involves identifying transcripts and quantifying their expression levels. Tools used include:

• StringTie: Assembles and quantifies transcripts from aligned reads.
• Salmon/Kallisto: Perform pseudo-alignment for rapid and accurate quantification.

Expression levels are typically measured as TPM (transcripts per million) or FPKM (fragments per kilobase of transcript per million mapped reads).

5. Differential Expression Analysis

To identify genes with altered expression between conditions, bioinformaticians use tools such as:

• DESeq2: Accounts for data normalization and variability.
• edgeR: Handles overdispersed count data efficiently.
• Limma-voom: Combines linear modeling with RNA-Seq count data.

The output includes a list of differentially expressed genes (DEGs) with statistical significance and fold-change values.

6. Functional Annotation and Pathway Analysis

Understanding the biological significance of DEGs involves:

• Gene Ontology (GO) Analysis: Tools like DAVID or clusterProfiler categorize genes based on their biological functions.
• Pathway Enrichment Analysis: Identifies pathways enriched in DEGs using tools like KEGG, Reactome, or GSEA.

7. Visualization

Visualizing results enhances interpretability. Common visualizations include:

• Heatmaps: Show expression patterns across samples (e.g., pheatmap).
• Volcano Plots: Highlight significant DEGs (e.g., ggplot2).
• PCA/UMAP: Assess sample clustering and variability (e.g., Seurat).

Challenges in RNA-Seq Analysis

1. Batch Effects: Technical variability can confound biological signals. Combat this with normalization techniques or batch-correction tools like ComBat.
2. Low-Quality Samples: Poor-quality RNA impacts downstream analyses.
3. Computational Complexity: RNA-Seq generates massive datasets, requiring robust computing resources and optimized pipelines.

Key Tools and Resources

• Bioconductor: A treasure trove of R packages for RNA-Seq analysis.
• Galaxy: A web-based platform for running RNA-Seq workflows.
• Nextflow/Snakemake: Workflow management tools to streamline analyses.

Applications of RNA-Seq

RNA-Seq is used in diverse research areas, including:

• Cancer Transcriptomics: Identifying tumor-specific expression profiles.
• Developmental Biology: Studying dynamic transcriptome changes.
• Drug Discovery: Screening genes modulated by therapeutic compounds.

Conclusion

RNA-Seq analysis is a cornerstone of modern transcriptomics, offering bioinformaticians a versatile toolkit for unraveling gene expression and regulation. Mastering RNA-Seq workflows and tools empowers researchers to transform raw sequencing data into biological discoveries.

Whether you’re investigating disease mechanisms, exploring cellular pathways, or developing new therapeutics, RNA-Seq is a powerful ally in your bioinformatics arsenal.

Address of the bookmark: https://ics.hutton.ac.uk/strudel/

List of analysis tools developed for Oxford Nanopore data

BWA
Fast nanopore data tuned alignment tool
https://github.com/lh3/bwa

GraphMap
Mapper for long and error-prone reads
https://github.com/isovic/graphmap

LAST
Nanopore tuned alignment tool
http://last.cbrc.jp/

LINKS
Software tool for long read scaffolding
https://github.com/warrenlr/LINKS/

marginAlign
Tools to align nanopore reads to a reference
https://github.com/benedictpaten/marginAlign

minoTour
Real time analysis tools
http://minotour.nottingham.ac.uk/

nanoCORR
Error-correction tool for nanopore sequence data
https://github.com/jgurtowski/nanocorr

NanoOK
Software for nanopore data, quality and error profiles
https://documentation.tgac.ac.uk/display/NANOOK/NanoOK

Nanopolish
Nanopore analysis and genome assembly software
https://github.com/jts/nanopolish

nanopore
Variant-detection tool for nanopore sequence data
https://github.com/mitenjain/nanopore

Nanocorrect
Error-correction tool for nanopore sequence data
https://github.com/jts/nanocorrect/

npReader
Real-time conversion and analysis of nanopore reads
https://github.com/mdcao/npReader

poRe
Tool for analyzing and visualizing nanopore data
https://sourceforge.net/p/rpore/wiki/Home/

PoreSeq
Error-correction and variant-calling software
https://github.com/tszalay/poreseq

Poretools
Nanopore sequence analysis and visualization software
https://github.com/arq5x/poretools

SSPACE-LongRead
Genome scaffolding tool
http://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE-longread

SMIS
Genome scaffolding tool
https://sourceforge.net/projects/phusion2/files/smis/

List of assemblers for Oxford Nanopore MinION long reads

LQS
DALIGNER, Celera OLC Nanocorrect,
Nanopolish corrector
https://github.com/jts/nanopolish

PBcR
HGAP or BLASR, Celera OLC
PBcR corrector
http://wgs-assembler.sourceforge.net/wiki/index.php/PBcR
–
Canu
MHAP, Celera OLC
Canu corrector
https://github.com/marbl/canu

Falcon
String graph, Celera OLC
Falcon corrector
https://github.com/PacificBiosciences/falcon

Miniasm
OLC
https://github.com/lh3/miniasm

ra-integrate
OLC
https://github.com/mariokostelac/ra-integrate/

ALLPATHS-LG
de Bruijn graph
ALLPATHS-L corrector
https://www.broadinstitute.org/software/allpaths-lg/blog/?page_id=12

SPAdes
de Bruijn graph
SPAdes corrector
http://bioinf.spbau.ru/spades

If you are interested in gene prediction, have a look at GenomeThreader.

Address of the bookmark: http://genometools.org/

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

https://function.princeton.edu/

More at https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-03666-4

Address of the bookmark: https://github.com/aghozlane/shaman

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4.  BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin