More at http://www.du.ac.in/du/index.php?mact=News,cntnt01,detail,0&cntnt01articleid=12859&cntnt01returnid=83

You see, for the past couple of years, I’ve been a bit frustrated because OS X does not come with a whole lot of Perl modules pre-installed, and for all I googled, I couldn’t find an “idiot’s” guide for moderately-savvy-but-not-expert users like myself to install modules and dependencies on demand.

The only instructions I could find point to Fink, which basically installs modules in a path that isn’t included in the Perl @INC variable, meaning you have to manually specify the full path to the modules in every script — which is not a lot of fun if you’re developing on OS X and deploying on Red Hat, for instance.

Moreover, Fink doesn’t seem to make every module available, and it’s not very easy to determine which Fink package you need to install if you need a particular module.

So, with a script that called on several apparently unavailable modules, and a deadline looming, I finally decided to suck it up and figure out how to use CPAN to install them:

1) Make sure you have the Apple Developer Tools (XCode) installed.

These are on one of your install discs, or available as a huge but free download from the Apple Developer Connection [free registration required] or the Mac App Store. I thought I had them, but apparently when we upgraded that computer to Tiger, they went missing.

If you don’t have this stuff installed, your installation will fail with errors about unavailable commands.

1.5) Install Command Line Tools (Recent XCode versions only)

(Thank you to Tom Marchioro for informing me about this step.)

Older versions of XCode installed the command line tools (which are required to properly install CPAN modules) by default, but apparently newer ones do not. To check whether you have the command line tools already installed, run the following from the Terminal:

$ which make

This command checks the system for the “make” tool. If it spits out something like /usr/bin/make you’re golden and can skip ahead to Step 2. If you just get a new prompt and no output, you’ll need to install the tools:

1. Launch XCode and bring up the Preferences panel.
2. Click on the Downloads tab
3. Click to install the Command Line Tools

If you like, you can run which make again to confirm that everything’s installed correctly.

2) Configure CPAN.

$ sudo perl -MCPAN -e shell

perl> o conf init

This will prompt you for some settings. You can accept the defaults for almost everything (just hit “return”). The two things you must fill in are the path to make (which should be /usr/bin/make or the value returned when you run which make from the command line) and your choice of CPAN mirrors (which you actually choose don’t really matter, but it won’t let you finish until you select at least one). If you use a proxy or a very restrictive firewall, you may have to configure those settings as well.

If you skip Step 2, you may get errors about make being unavailable.

3) Upgrade CPAN

$ sudo perl -MCPAN -e 'install Bundle::CPAN'

Don’t forget the sudo, or it’ll fail with permissions errors, probably when doing something relatively unimportant like installing man files.

This will spend a long time downloading, testing, and compiling various files and dependencies. Bear with it. It will prompt you a few times about dependencies. You probably want to enter “yes”. I agreed to everything it asked me, and everything turned out fine. YMMV of course. If everything installs properly, it’ll give you an “OK” at the end.

4) Install your modules. For each module….

$ sudo perl -MCPAN -e 'install Bundle::Name'

or

$ sudo perl -MCPAN -e 'install Module::Name'

This will install the module and its dependencies. Nice, eh? Again, don’t forget the sudo.

The first time you run this after upgrading CPAN, it may prompt you to configure again (see Step 2). If you accept its offer to try to configure itself automatically, it may just run through everything without a problem.

There are a couple of potential pitfalls with specific modules (such as theLWP::UserAgent / HEAD issue), but most have workarounds, and I haven’t run into anything that wasn’t easily recoverable.

And that’s it!

Did you find this useful? Is there anything I missed?

THIRUVANANTHAPURAM - 695 562

Traineeship on Bioinformatics(2)

First class M.Sc. Bioinformatics/ Agriculture/ Botany/ Biotechnology @ Rs.8000

Those candidates who fulfill the above criteria may attend a walk PCC Coordinator in-interview on 28th November 2016 at Saraswathy Thangavelu center, JNTBGRI, Puthenthope, Thiruvananthapuram between at 10.00 am and 2.00 pm with all the relevant document and testimonials.

No TA/DA will be given to candidates for attending the interview.

More Info : http://jntbgri.res.in/downloads/traineeship_notification.pdf

This collection highlights important statistical issues that biologists should be aware of and provides practical advice to help them improve the rigor of their work.

Nature Methods' Points of Significance column on statistics explains many key statistical and experimental design concepts. Other resources include an online plotting tool and links to statistics guides from other publishers.

Address of the bookmark: http://www.nature.com/collections/qghhqm

ESSENTIAL QUALIFICATIONS:
We are looking for a motivated candidate with keen interest in bioinformatics and microbial genome evolution. The candidate must have a Master’s Degree in Bioinformatics, Computational Biology, Computer Science, Microbiology, Biology or a related field with good academic record.

DESIRABLE QUALIFICATIONS
Hands on research experience on handling next generation sequencing data and phylogenetic reconstruction methods. Excellent programming skills (Perl/Python/Java/Php) and experience in working on Unix/Linux platform is preferred. Furthermore; good knowledge is required in statistics (R/Matlab) and the application of bioinformatics analysis tools.

AGE:
Below 28 years as on 15th November, 2016.

EMOLUMENTS:
Rs. 25,000 + 20% HRA for NET/GATE qualified and Post Graduate in Professional Degree course qualified candidates and
Rs. 12,000/- + 20% HRA for others.

DURATION:
Initial appointment will be given for one year and further extension will be based on the performance till termination of the project.
Only those fulfilling the above criteria need apply and will be called for interview. In the event of more than 10 candidates being short-listed by screening the applications, a written test will be conducted before the selection interview and only those who are successful in the written test will be interviewed. No TA/ DA will be given for appearing in the interview.

Suitably qualified candidates may send applications in the prescribed format (Download here) with a photograph, a copy of full resume indicating the percentage of Marks obtained and attested photocopies of credentials & experience to reach the undersigned on or before 15th November, 2016. Envelopes must be superscripted with abbreviated title of the project, advertisement number and job title. Selection to the position will not entitle the candidate to any future positions at RGCB (permanent or otherwise). As with all project positions at RGCB, the position will be co terminus with end of the project.

Please bookmarks your favourate biostatistics books in commend sectons ...

Address of the bookmark: http://www.cos.ufrj.br/~bioestatistica/livros/Introduction%20to%20Biostatistics.pdf

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis
Project entitled: “Next generation EGFR inhibitor identification using ligand based QSAR technique”

Essential: M.Sc. in Bioinformatics or related field. Desirable: Experience in QSAR and structure based drug designing.
Age: 28 years
No.of Post: 1

Pay Scale : Rs.27000

Application format is attached and should be sent by post to Dr. Subhash M Agarwal, Scientist D, Division of Bioinformatics, National Institute of Cancer Prevention & Research (ICMR), Plot No. I-7, Sector-39, Noida 201301 (U.P).

More at http://www.icmr.nic.in/icmrnews/NICPR_Advertisement%20for%20RA.pdf

Availability: Genomicus is freely available for online use at http://www.dyogen.ens.fr/genomicus while data can be downloaded at ftp://ftp.biologie.ens.fr/pub/dyogen/genomicus

Contact: rf.sne.eigoloib@crh

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2853686/

Address of the bookmark: http://engr.case.edu/li_jing/papers/00798gpattern.pdf

In C, "sequence statements" are imperatives. The "selection" is the "if then else" statement, and the iteration is satisfied by a number of statements, such as the "while," " do," and the "for," while the case-type statement is satisfied by the "switch" statement.

Pseudocode is an artificial and informal language that helps programmers develop algorithms. Pseudocode is a "text-based" detail (algorithmic) design tool.

The rules of Pseudocode are reasonably straightforward. All statements showing "dependency" are to be indented. These include while, do, for, if, switch. Examples below will illustrate this notion.

GUIDE TO PSEUDOCODE LEVEL OF DETAIL: Given record/file descriptions, pseudocode should be created in sufficient detail so as to directly support the programming effort. It is the purpose of pseudocode to elaborate on the algorithmic detail and not just cite an abstraction.

Examples:

1.

If student's grade is greater than or equal to 60
    Print "passed"
else
    Print "failed"  
endif

2.

  
Set total to zero
Set grade counter to one
While grade counter is less than or equal to ten
    Input the next grade
    Add the grade into the total
endwhile 
Set the class average to the total divided by ten
Print the class average.

3.

Initialize total to zero
Initialize counter to zero
Input the first grade
while the user has not as yet entered the sentinel
   add this grade into the running total 
   add one to the grade counter  
   input the next grade (possibly the sentinel)
endwhile

if the counter is not equal to zero
   set the average to the total divided by the counter
   print the average  
else
   print 'no grades were entered' 
endif 

4.

initialize passes to zero
initialize failures to zero
initialize student to one
while student counter is less than or equal to ten
    input the next exam result  
    if the student passed

add one to passes else add one to failures add one to student counter endif endwhile print the number of passes print the number of failures if eight or more students passed print "raise tuition" endif

5.

Larger example:  

NOTE:  NEVER ANY DATA DECLARATIONS IN PSEUDOCODE

Print out appropriate heading and make it pretty
While not EOF do:
     Scan over blanks and white space until a char is found 
	(get first character on the line)
     set can't-be-ascending-flag to 0
     set consec cntr to 1
     set ascending cntr to 1
     putchar first char of string to screen
     set read character to hold character
     While next character read != blanks and white space
          putchar out on screen
          if new char = hold char + 1
               add 1 to consec cntr
               set hold char = new char
               continue
          endif
          if new char >= hold char 
               if consec cntr < 3 
                    set consec cntr to 1
               endif
               set hold char = new char
               continue
          endif
          if new char < hold char
               if consec cntr < 3
                    set consec cntr to 1
               endif
               set hold char = new char
               set can't be ascending flag to 1
               continue
           endif
     end while
     if consec cntr >= 3 
          printf (Appropriate message 1 and skip a line)
          add 1 to consec total
     endif
     if  can't be ascending flag = 0
          printf (Appropriate message 2 and skip a line)
          add 1 to ascending total
     else
          printf (Sorry message and skip a line)
          add 1 to sorry total
     endif
end While
Print out totals:  Number of consecs, ascendings, and sorries.
Stop

Some Keywords That Should be Used And Additional Points

For looping and selection, The keywords that are to be used include Do While...EndDo; Do Until...Enddo; While .... Endwhile is acceptable. Also, Loop .... endloop is also VERY good and is language independent. Case...EndCase; If...Endif; Call ... with (parameters); Call; Return ....; Return; When;

Always use scope terminators for loops and iteration.

As verbs, use the words Generate, Compute, Process, etc. Words such as set, reset, increment, compute, calculate, add, sum, multiply, ... print, display, input, output, edit, test , etc. with careful indentation tend to foster desirable pseudocode. Also, using words such as Set and Initialize, when assigning values to variables is also desirable.

More on Formatting and Conventions in Pseudocoding

• INDENTATION in pseudocode should be identical to its implementation in a programming language. Try to indent at least four spaces.
• As noted above, the pseudocode entries are to be cryptic, AND SHOULD NOT BE PROSE. NO SENTENCES.
• No flower boxes (discussed ahead) in your pseudocode.
• Do not include data declarations in your pseudocode.
• But do cite variables that are initialized as part of their declarations. E.g. "initialize count to zero" is a good entry.

  ---

  Function Calls, Function Documentation, and Pseudocode
• Calls to Functions should appear as:
• Returns in functions should appear as:
• Function headers should appear as:
• Note that in C, arguments and parameters such as "fieldn" could be written: "pointer to fieldn ...."
• Functions called with addresses should be written as:
• Function headers containing pointers should be indicated as:
• Returns in functions where a pointer is returned:
• It would not hurt the appearance of your pseudocode to draw a line or make your function header line "bold" in your pseudocode. Try to set off your functions.
• Try to use scope terminators in your pseudocode and source code too. It really hels the readability of the text.

  ---

  Source Code
• EVERY function should have a flowerbox PRECEDING IT. This flower box is to include the functions name, the main purpose of the function, parameters it is expecting (number and type), and the type of the data it returns. All of these listed items are to be on separate lines with spaces in between each explanatory item.
• FORMAT of flowerbox should be

   

  	 ********************************************************
  	 Function:   ( cryptic text describing single function
  		     ....... (indented like this) 	
  		     .......
  	 Calls:      Start listing functions "this" function calls
  		     Show these functions:  one per line, indented
  
  	 Called by:  List of functions that calls "this" function
  		     Show these functions:  one per line, indented.
  
  	 Input Parameters:  list, if appropriate; else None
  	 
  	 Returns:    List, if appropriate.
  	 ****************************************************************
  

• INDENTATION is critically important in Source Code. Follow standard examples given in class. If in doubt, ASK. Always indent statements within IFs, FOR loops, WILLE loops, SWITCH statements, etc. a consistent number of spaces, such as four. Alternatively, use the tab key. One or two spaces is insufficient.
• Use scope terminators at the end of if statements, for statements, while statements, and at the end of functions. It will make your program much more readable.

  SPELLING ERRORS ARE NOT ACCEPTABLE