1) demonstrated experience in Bioinformatics research,
2) programing experience (python and/or R, C and C++ are very welcome),
3) knowledge of Linux/Unix environment,
4) experience in handling deep-seq data,
5) highly motivated and hard working, and
6) interested to work with a multi-disciplinary team combining bioinformatics, genomics, computational biology approaches with experimental biology.

Our research interest covers different areas of bioinformatics and genomics in order to achieve a deeper understanding of gene and genome structure and function (please look at our PubMed publications for more details about our research http://www.ncbi.nlm.nih.gov/pubmed/?term=pesole+g).

Interested applicants should email the curriculum vitae to Prof. Graziano Pesole at graziano.pesole@uniba.it or Dr. Ernesto Picardi at Ernesto.picardi@uniba.it.

Start date: immediate

Duration: up to 24 months
Contact Person (Referent): Ernesto Picardi
Ref. E-Mail: ernesto.picardi@uniba.it
Tel: +390805443308
Fax: +390805443317

Group Web Page: http://www.pesolelab.it/

1. Setting up your computing environment
2. Retrieving and storing sequencing files (your own data or from public sources)
3. Checking sequence quality, trimming, general sequence manipulation
4. Mapping reads to a reference genome
5. Manipulating SAM/BAM alignment files
6. Visualizing data in a genome browser

RNA-Seq

1. De novo transcript discovery and differential analysis with Cufflinks
2. Differential expression analysis with R/Bioconductor
3. Clustering of large expression datasets (microarray or RNA-Seq)

Microarray

1. Basic analysis of Affymetrix Gene Expression Arrays using R/Bioconductor

General Tips for Data Analysis

1. Excel workarounds, adding gene annotation, X-Y plots tips, etc.

Address of the bookmark: http://homer.salk.edu/homer/basicTutorial/

Cleaning your data in this way is often required: Reads from small-RNA sequencing contain the 3’ sequencing adapter because the read is longer than the molecule that is sequenced. Amplicon reads start with a primer sequence. Poly-A tails are useful for pulling out RNA from your sample, but often you don’t want them to be in your reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

Address of the bookmark: https://cutadapt.readthedocs.io/en/stable/installation.html#quickstart

In the mid 1960's scientists discovered that many genomes contain stretches of highly repetitive DNA sequences ( see Reassociation Kinetics Experiments, and C-Value Paradox ). These sequences were later characterized and placed into five categories:

Simple Repeats - Duplications of simple sets of DNA bases (typically 1-5bp) such as A, CA, CGG etc.
Tandem Repeats - Typically found at the centromeres and telomeres of chromosomes these are duplications of more complex 100-200 base sequences.
Segmental Duplications - Large blocks of 10-300 kilobases which are that have been copied to another region of the genome.
Interspersed Repeats
Processed Pseudogenes, Retrotranscripts, SINES - Non-functional copies of RNA genes which have been reintegrated into the genome with the assitance of a reverse transcriptase.
DNA Transposons
Retrovirus Retrotransposons
Non-Retrovirus Retrotransposons ( LINES )

Currently up to 50% of the human genome is repetitive in nature and as improvements are made in detection methods this number is expected to increase.

On the other hand; In genetics, the term palindrome refers to a sequence of nucleotides along a DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) strand that contains the same series of nitrogenous bases regardless from which direction the strand is analyzed. Akin to a language palindrome—wherein a word or phrase is spelled the same left-to-right as right-to-left (e.g., the word RADAR or the phrase "able was I ere I saw elba")—with genetic palindromes it does not matter whether the nucleic acid strand is read starting from the 3' (three prime) end or the 5' (five prime) end of the strand.

Recent research on palindromes centers on understanding palindrome formation during gene amplification. Other studies have attempted to relate palindrome formation to molecular mechanisms involved in double stranded breaks and in the formation of inverted repeats. Assisted by high speed computers, other groups of scientists link palindrome formation to the conservation of genetic information.

Related to the direction of transcription by RNA polymerase, DNA strands have upstream and downstream terminus defined by differing chemical groups at each end. The ends of each strand of DNA or RNA are termed the 5' (phosphate bound to the 5' position carbon) and 3' (phosphate bound to the 3' carbon) ends to indicate a polarity within the molecule. Using the letters A, T, C, G, to represent the nitrogenous bases adenine, thymine, cytosine, and guanine found in DNA, and the letters A, U, C, G to represent the nitrogenous bases adenine, uracil, cytosine, guanine found in RNA (Note that uracil in RNA replaces the thymine found in DNA), geneticists usually represent DNA by a series of base codes (e.g., 5' AATCGGATTGCA 3'). The base codes are usually arranged from the 5' end to the 3' end.

Because of specific base pairing in DNA (i.e., adenine (A) always bonds with (thymine (T) and cytosine (C) always bonds with guanine (G)) the complimentary stand to the sequence 5' AATCGGATTGCA 3' would be 3' TTAGCCTAACGT 5'.

With palindromes the sequences on the complimentary strands read the same in either direction. For example, a sequence of 5' GAATTC3' on one strand would be complimented by a 3' CTTAAG 5' strand. In either case, when either strand is read from the 5' prime end the sequence is GAATTC. Another example of a palindrome would be the sequence 5' CGAAGC 3' that, when reversed, still reads CGAAGC.

Palindromes are important sequences within nucleic acids. Often they are the site of binding for specific enzymes (e.g., restriction endobucleases) designed to cut the DNA strands at specific locations (i.e., at palindromes).

Palindromes may arise from brakeage and chromosomal inversions that form inverted repeats that compliment each other. When a palindrome results from an inversion, it is often referred to as an inverted repeat. For example, the sequence 5' CGAAGC 3', if inverted (reversed 180°), still reads CGAAGC.

The European Molecular Biology Open Software Suite (EMBOSS) includes some basic tools for finding tandem repeats and inverted repeats (see B.6.22. Applications in group Nucleic:repeats). There are many on-line services providing the EMBOSS tools, for example:

• Wageningen Bioinformatics Webportal EMBOSS explorer
• Mobyle@Pasteur
• Soaplab2 Web Services at Vital-IT

For more sophisticated repeat finding you will want to look at tools using Repbase for example:

• CENSOR
  • CENSOR@GIRI
  • CENSOR@EMBL-EBI
• RepeatMasker
• MUMmer (scan_for_match)
• Emboss Palindrome

Other nucleotide repeat finding methods found by a couple of web searches:

• Tandem Repeats Finder
• RECON
• RepeatRunner
• REPuter
• Imperfect Microsatellite Extractor (IMEx)
• Spectral Repeat Finder (SRF)
• REPFIND
• CRISPRfinder
• GrailEXP
• CONREPP
• find_palindromes
• Palindrome
• EMBOSS Palindrome
• Palindrome Search

Address of the bookmark: http://www.cytoscape.org/

LPI scores are inversely proportional to the phylogenetic distance between database match sequences and the query genome. These scores are useful not only for large-scalede novo predictions of horizontally transferred proteins, but can also serve as an independent quality control test for potential horizontal transfer candidates identified by alternative methods, especially those based on nucleic acid signatures. Candidates having high LPI scores are unlikely to have been horizontally transferred, since they are highly conserved among closely related organisms.

One unique and powerful feature of the DarkHorse HGT Candidate database is the opportunity to explore the phylogenetic background of potential HGT donors as well as recipients. The breadth of the database allows not only query sequences, but also their database match partners to be evaluated for sequence similarity or novelty compared to taxonomically related organisms.

DarkHorse is configurable for varying degrees of phylogenetic granularity and protein sequence conservation. Users should consult the references cited below for a complete explanation of parameter selection and result interpretation. A brief tutorial page is also available on-line.

Address of the bookmark: http://darkhorse.ucsd.edu/download.html

Wgsim is a small tool for simulating sequence reads from a reference genome. It is able to simulate diploid genomes with SNPs and insertion/deletion (INDEL) polymorphisms, and simulate reads with uniform substitution sequencing errors. It does not generate INDEL sequencing errors, but this can be partly compensated by simulating INDEL polymorphisms.

Wgsim outputs the simulated polymorphisms, and writes the true read coordinates as well as the number of polymorphisms and sequencing errors in read names. One can evaluate the accuracy of a mapper or a SNP caller with wgsim_eval.pl that comes with the package.

Address of the bookmark: https://github.com/lh3/wgsim

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

1. How to perform basic quality checks on the input data
2. How to run a short read assembler on Illumina data
3. How to run a long read assembler on Pacific Biosciences or Oxford Nanopore data
4. How to improve the accuracy of a long read assembly using short reads
5. How to assess the quality of an assembly

https://bioinformaticsdotca.github.io/high-throughput_biology_2017

Address of the bookmark: https://bioinformaticsdotca.github.io/high-throughput_biology_2017_module6_lab