BOL: Related items

iTOL: interactive Tree Of Life

Jit — Tue, 31 Jan 2017 05:56:30 -0600

Interactive Tree Of Life is an online tool for the display and manipulation of phylogenetic trees. It provides most of the features available in other tree viewers, and offers a novel circular tree layout, which makes it easy to visualize mid-sized tree (up to several thousand leaves). Trees can be exported to several graphical formats, both bitmap and vector based.

There are several pre-computed trees available for display, including the main Tree Of Life, described in Ciccarelli, et al., 2006. In addition to the precomputed trees, users can upload and display personal trees and data, using the 'Data upload' page or through a personal user account.

Address of the bookmark: http://itol.embl.de/

Mercator

Jit — Mon, 06 Feb 2017 04:20:36 -0600

Our basic strategy in building homology maps is to use exons that are orthologous in multiple genomes as map "anchors." Given K genomes, the steps in the map construction are as follows:

For each genome, obtain a set of exon annotations. These annotations can be a combination of both exon predictions (e.g. Genscan) and annotations that have been experimentally verified (e.g. RefSeq). Ideally, we would like to have these annotations be as sensitive as possible. Specificity is not a concern, as incorrect annotations are not likely not have significant alignments with other gene annotations.
Compare all exons against all exons in other genomes and record significant alignments between exons. Currently, we use BLAT to do this all-vs-all comparison with alignments being performed in protein space.
Construct a graph with each vertex corresponding to a exon and edges between vertices whose corresponding exons have significant alignments.
Identify cliques in this graph. These cliques are potential anchors to be used in the map.
Starting with the largest cliques (those that have exons in all or most of the genomes), join neighboring (adjacent in genomic coordinates, in each genome) cliques to form runs. Smaller cliques that are inconsistent with runs formed by larger cliques are filtered out. After the smallest cliques have been considered, cliques that are not part of a run are discarded.
The extents of each run in each genome are outputted as orthologous segments. The cliques from each run are used to output the exact genomic coordinates of anchors within each orthologous segment. These anchors can be used by genomic alignment programs (such as MAVID) to do a detailed alignment of each orthologous segment.

https://www.biostat.wisc.edu/~cdewey/mercator/

Address of the bookmark: https://www.biostat.wisc.edu/~cdewey/mercator/

MafTools

Jit — Thu, 16 Feb 2017 11:16:01 -0600

maftools - An R package to summarize, analyze and visualize MAF files. Introduction.

With advances in Cancer Genomics, Mutation Annotation Format (MAF) is being widley accepted and used to store variants detected. The Cancer Genome Atlas Project has seqenced over 30 different cancers with sample size of each cancer type being over 200. The resulting data consisting of genetic variants is stored in the form of Mutation Annotation Format. This package attempts to summarize, analyze, annotate and visualize MAF files in an efficient manner either from TCGA sources or any in-house studies as long as the data is in MAF format. Maftools can also handle ICGC Simple Somatic Mutation format.

maftools is on bioRxiv

Please cite the below if you find this tool useful for you.

Mayakonda, A. and H.P. Koeffler, Maftools: Efficient analysis, visualization and summarization of MAF files from large-scale cohort based cancer studies. bioRxiv, 2016. doi: http://dx.doi.org/10.1101/052662

Address of the bookmark: https://github.com/PoisonAlien/maftools

DIAL

Abhimanyu Singh — Wed, 01 Mar 2017 08:42:28 -0600

A computational pipeline for identifying single-base substitutions between two closely related genomes without the help of a reference genome. DIAL works even when the depth of coverage is insufficient for de novo assembly, and it can be extended to determine small insertions/deletions. Our main motivation is to use this tool to survey the genetic diversity of endangered species as the identified sequence differences can be used to design genotyping arrays to assist in the species' management.

http://www.bx.psu.edu/~ratan/

Address of the bookmark: http://www.bx.psu.edu/miller_lab/

CLgenomics

Radha Agarkar — Fri, 03 Mar 2017 09:57:28 -0600

CLgenomics is a standalone desktop software specifically designed for bacterial genome analysis. This program has a powerful multi-genome browser, which enables rapid and responsive exploration of bacterial genomes.

To use CLgenomics, individual genome data (genome sequences + annotation details) are compiled and saved in a specially formatted file called CLG (ChunLab Genomics). Each CLG file corresponds with one bacterial genome. If multiple genomes are being considered and compared, multiple CLG files are needed. ChunLab offers >40,000 CLG files of publicly available Bacterial and Archaeal genomes.

Address of the bookmark: https://chunlab.wordpress.com/clgenomics-software/

DeCoSTAR - Detection of Co-evolution

Jit — Fri, 14 Apr 2017 06:27:25 -0500

DeCoSTAR is a software which aims at reconstructing ancestral gene or genome organizations, in the form of sets of neighborhood relations -adjacencies- between pairs of ancestral genes or gene domains.
Ancestral genes or domains are deduced from reconciled gene trees in a context of birth, speciation, duplication, loss, transfer, which are either given as input or computed with the ecceTERA package, to which DeCoSTAR is integrated. DeCoSTAR constructs parsimonious scenarios of gains and breakages of adjacencies, and contains in particular all the features of previous software DeCo, DeCoLT, ArtDeCo and DeClone. It provides statistical supports on ancestral adjacencies, or the possibility to handle badly assembled genomes.
DeCoSTAR is able to reconstruct the histories of domains inside genes, including gene fusion and fission events, as well as ancestral genome structures for dozens of whole genomes from all kingdoms of life in a few minutes.

Address of the bookmark: http://pbil.univ-lyon1.fr/software/DeCoSTAR/

A Post-assembly genome-improvement toolkit (PAGIT) to obtain annotated genomes from contigs

Abhimanyu Singh — Fri, 12 May 2017 10:50:29 -0500

PAGIT addresses the need for software to generate high quality draft genomes. It is based on a series of programs that we developed:

ABACAS, that is able to contiguate contigs from a de novo assembly against a closely related reference.

IMAGE, an iterative approach for closing gaps in assembled genomes using mate pair information. It is able to close gaps left open by the assembler in a draft genome, even when using the same data sets as used by the original assembler.

iCORN, that enables errors in the consensus sequence to be corrected by iteratively mapping reads to the current assembly. An improved version, especially correction Pacfic Bioscience assemblies (PacBio) can be found here.

RATT, a tool to transfer the annotation from a reference genome, or an earlier assembly, onto the latest assembly.

PAGIT bundles these software and makes them more accessible for users.

Address of the bookmark: http://www.sanger.ac.uk/science/tools/pagit

Fastq format

Jit — Wed, 03 May 2017 04:23:32 -0500

FASTQ format is a text-based format for storing both a biological sequence (usually nucleotide sequence) and its corresponding quality scores. Both the sequence letter and quality score are each encoded with a single ASCII character for brevity.

It was originally developed at the Wellcome Trust Sanger Institute to bundle a FASTA sequence and its quality data, but has recently become the de facto standard for storing the output of high-throughput sequencing instruments such as the Illumina Genome Analyzer.^[1]

Address of the bookmark: https://en.wikipedia.org/wiki/FASTQ_format

Meraculous: De Novo Genome Assembly with Short Paired-End Reads

Jit — Tue, 07 Nov 2017 04:36:10 -0600

We describe a new algorithm, meraculous, for whole genome assembly of deep paired-end short reads, and apply it to the assembly of a dataset of paired 75-bp Illumina reads derived from the 15.4 megabase genome of the haploid yeast Pichia stipitis. More than 95% of the genome is recovered, with no errors; half the assembled sequence is in contigs longer than 101 kilobases and in scaffolds longer than 269 kilobases. Incorporating fosmid ends recovers entire chromosomes. Meraculous relies on an efficient and conservative traversal of the subgraph of the k-mer (deBruijn) graph of oligonucleotides with unique high quality extensions in the dataset, avoiding an explicit error correction step as used in other short-read assemblers. A novel memory-efficient hashing scheme is introduced. The resulting contigs are ordered and oriented using paired reads separated by ∼280 bp or ∼3.2 kbp, and many gaps between contigs can be closed using paired-end placements. Practical issues with the dataset are described, and prospects for assembling larger genomes are discussed.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3158087/

DIYA: a bacterial annotation pipeline for any genomics lab

Jit — Fri, 30 Jun 2017 08:48:26 -0500

DIY Genomics is an open source bioinformatics consortium intended to bring a collection of tools and libraries into the hands of small scale genomics labs for the process of sequence assembly and annotation. Projects include DIYA, MGAP, CRISPR, and DIYGV

http://gmod.org/wiki/Diya

Address of the bookmark: https://sourceforge.net/projects/diyg/