BOL: Related items

BBMap help

Shruti Paniwala — Mon, 10 Oct 2016 06:29:03 -0500

BBMAP • a solution for everything

That content has been reformatted and it is being expanded to include more information.

There are common options for most BBMap suite programs and depending on the file extension the input/output format is automatically chosen/set.

Using BBMap

Mapping Nanopore reads

BBMap.sh has a length cap of 6kbp. Reads longer than this will be broken into 6kbp pieces and mapped independently.

More at https://www.biostarhandbook.com/tools/bbmap/bbmap-help.html

Address of the bookmark: https://www.biostarhandbook.com/tools/bbmap/bbmap-help.html

How to install Perl modules on Mac OS X in easy steps !!

Jit — Thu, 20 Oct 2016 07:26:29 -0500

Today at work, I learned how to install Perl modules using CPAN. It’s a lot easier than I thought.

You see, for the past couple of years, I’ve been a bit frustrated because OS X does not come with a whole lot of Perl modules pre-installed, and for all I googled, I couldn’t find an “idiot’s” guide for moderately-savvy-but-not-expert users like myself to install modules and dependencies on demand.

The only instructions I could find point to Fink, which basically installs modules in a path that isn’t included in the Perl @INC variable, meaning you have to manually specify the full path to the modules in every script — which is not a lot of fun if you’re developing on OS X and deploying on Red Hat, for instance.

Moreover, Fink doesn’t seem to make every module available, and it’s not very easy to determine which Fink package you need to install if you need a particular module.

So, with a script that called on several apparently unavailable modules, and a deadline looming, I finally decided to suck it up and figure out how to use CPAN to install them:

1) Make sure you have the Apple Developer Tools (XCode) installed.

These are on one of your install discs, or available as a huge but free download from the Apple Developer Connection [free registration required] or the Mac App Store. I thought I had them, but apparently when we upgraded that computer to Tiger, they went missing.

If you don’t have this stuff installed, your installation will fail with errors about unavailable commands.

1.5) Install Command Line Tools (Recent XCode versions only)

(Thank you to Tom Marchioro for informing me about this step.)

Older versions of XCode installed the command line tools (which are required to properly install CPAN modules) by default, but apparently newer ones do not. To check whether you have the command line tools already installed, run the following from the Terminal:

$ which make

This command checks the system for the “make” tool. If it spits out something like /usr/bin/make you’re golden and can skip ahead to Step 2. If you just get a new prompt and no output, you’ll need to install the tools:

Launch XCode and bring up the Preferences panel.
Click on the Downloads tab
Click to install the Command Line Tools

If you like, you can run which make again to confirm that everything’s installed correctly.

2) Configure CPAN.

$ sudo perl -MCPAN -e shell

perl> o conf init

This will prompt you for some settings. You can accept the defaults for almost everything (just hit “return”). The two things you must fill in are the path to make (which should be /usr/bin/make or the value returned when you run which make from the command line) and your choice of CPAN mirrors (which you actually choose don’t really matter, but it won’t let you finish until you select at least one). If you use a proxy or a very restrictive firewall, you may have to configure those settings as well.

If you skip Step 2, you may get errors about make being unavailable.

3) Upgrade CPAN

$ sudo perl -MCPAN -e 'install Bundle::CPAN'

Don’t forget the sudo, or it’ll fail with permissions errors, probably when doing something relatively unimportant like installing man files.

This will spend a long time downloading, testing, and compiling various files and dependencies. Bear with it. It will prompt you a few times about dependencies. You probably want to enter “yes”. I agreed to everything it asked me, and everything turned out fine. YMMV of course. If everything installs properly, it’ll give you an “OK” at the end.

4) Install your modules. For each module….

$ sudo perl -MCPAN -e 'install Bundle::Name'

$ sudo perl -MCPAN -e 'install Module::Name'

This will install the module and its dependencies. Nice, eh? Again, don’t forget the sudo.

The first time you run this after upgrading CPAN, it may prompt you to configure again (see Step 2). If you accept its offer to try to configure itself automatically, it may just run through everything without a problem.

There are a couple of potential pitfalls with specific modules (such as theLWP::UserAgent / HEAD issue), but most have workarounds, and I haven’t run into anything that wasn’t easily recoverable.

And that’s it!

Did you find this useful? Is there anything I missed?

eFORGE.v1.2

Jit — Fri, 28 Oct 2016 09:06:59 -0500

The eFORGE tool provides a method to view the tissue specific regulatory component of a set of EWAS DMPs. eFORGE analysis takes a set of DMPs, such as those hits above genome-wide significance threshold in an EWAS study, and analyses whether there is enrichment for overlap of putative functional elements compared to matched background DMPs. It assesses enrichment on a per cell type basis, since functional elements are differentially active in different cell types, and hence can expose tissue-specific signals of enrichment for the given test DMP set. This can reveal the sites of action underlying the EWAS signal, and provide confirmation of the validity of the EWAS where a tissue-specific mechanism is known or expected for the phenotype. Conversely unknown tissue involvements can also be revealed.

Address of the bookmark: http://eforge.cs.ucl.ac.uk/eFORGE.v1.2/?documentation

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

R Graphs !!

Jit — Fri, 04 Nov 2016 10:48:00 -0500

The blog is a collection of script examples with example data and output plots. R produce excellent quality graphs for data analysis, science and business presentation, publications and other purposes. Self-help codes and examples are provided. Enjoy nice graphs !!

Address of the bookmark: http://rgraphgallery.blogspot.be/

Bioistats PPT

Jit — Tue, 08 Nov 2016 07:09:01 -0600

Basics concepts of Probability: The Study of Randomness

Biostatistics is the application of statistics to a wide range of topics in biology. The science of biostatistics encompasses the design of biological experiments, especially in medicine, pharmacy, agriculture and fishery; the collection, summarization, and analysis of data from those experiments; and the interpretation of, and inference from, the results. A major branch of this is medical biostatistics, which is exclusively concerned with medicine and health.

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/

Minia

Jit — Thu, 08 Dec 2016 05:07:00 -0600

Minia is a short-read assembler based on a de Bruijn graph, capable of assembling a human genome on a desktop computer in a day. The output of Minia is a set of contigs. Minia produces results of similar contiguity and accuracy to other de Bruijn assemblers (e.g. Velvet).

Download

Minia 2.0.7 Linux 64-bits binaries (Source code) (Legacy codebase)

For the impatient

A typical Minia command line looks like:

./minia -in reads.fa -kmer-size 31 -abundance-min 3 -out output_prefix

Type

./minia

for a quick explanation of the parameters.

For more information, refer to the manual.

KmerGenie can be used to determine the best k-mer size, minimum abundance of correct k-mers, and genome size estimation for your dataset.

Address of the bookmark: http://minia.genouest.org/

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

EAGER

Jit — Sat, 10 Dec 2016 18:07:23 -0600

The automated reconstruction of genome sequences in ancient genome analysis is a multifaceted process.

EAGER encompasses both state-of-the-art tools for each step as well as new complementary tools tailored for ancient DNA data within a single integrated solution in an easily accessible format.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0918-z

Address of the bookmark: https://github.com/apeltzer/EAGER-GUI