1) demonstrated experience in Bioinformatics research,
2) programing experience (python and/or R, C and C++ are very welcome),
3) knowledge of Linux/Unix environment,
4) experience in handling deep-seq data,
5) highly motivated and hard working, and
6) interested to work with a multi-disciplinary team combining bioinformatics, genomics, computational biology approaches with experimental biology.

Our research interest covers different areas of bioinformatics and genomics in order to achieve a deeper understanding of gene and genome structure and function (please look at our PubMed publications for more details about our research http://www.ncbi.nlm.nih.gov/pubmed/?term=pesole+g).

Interested applicants should email the curriculum vitae to Prof. Graziano Pesole at graziano.pesole@uniba.it or Dr. Ernesto Picardi at Ernesto.picardi@uniba.it.

Start date: immediate

Duration: up to 24 months
Contact Person (Referent): Ernesto Picardi
Ref. E-Mail: ernesto.picardi@uniba.it
Tel: +390805443308
Fax: +390805443317

Group Web Page: http://www.pesolelab.it/

https://www.pmgenomics.ca/hoffmanlab/

1. Setting up your computing environment
2. Retrieving and storing sequencing files (your own data or from public sources)
3. Checking sequence quality, trimming, general sequence manipulation
4. Mapping reads to a reference genome
5. Manipulating SAM/BAM alignment files
6. Visualizing data in a genome browser

RNA-Seq

1. De novo transcript discovery and differential analysis with Cufflinks
2. Differential expression analysis with R/Bioconductor
3. Clustering of large expression datasets (microarray or RNA-Seq)

Microarray

1. Basic analysis of Affymetrix Gene Expression Arrays using R/Bioconductor

General Tips for Data Analysis

1. Excel workarounds, adding gene annotation, X-Y plots tips, etc.

Address of the bookmark: http://homer.salk.edu/homer/basicTutorial/

Cleaning your data in this way is often required: Reads from small-RNA sequencing contain the 3’ sequencing adapter because the read is longer than the molecule that is sequenced. Amplicon reads start with a primer sequence. Poly-A tails are useful for pulling out RNA from your sample, but often you don’t want them to be in your reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

Address of the bookmark: https://cutadapt.readthedocs.io/en/stable/installation.html#quickstart

Anvi’o is an analysis and visualization platform for ‘omics data.

Please find the methods paper here: https://peerj.com/articles/1319/

Anvi’o would not have been possible without the help of many people who directly or indirectly contributed to its development. Here is the acknowledgements section of our methods paper

An analysis and visualization platform for 'omics data http://merenlab.org/projects/anvio

Paper https://peerj.com/articles/1839/

Address of the bookmark: https://github.com/meren/anvio

Wgsim is a small tool for simulating sequence reads from a reference genome. It is able to simulate diploid genomes with SNPs and insertion/deletion (INDEL) polymorphisms, and simulate reads with uniform substitution sequencing errors. It does not generate INDEL sequencing errors, but this can be partly compensated by simulating INDEL polymorphisms.

Wgsim outputs the simulated polymorphisms, and writes the true read coordinates as well as the number of polymorphisms and sequencing errors in read names. One can evaluate the accuracy of a mapper or a SNP caller with wgsim_eval.pl that comes with the package.

Address of the bookmark: https://github.com/lh3/wgsim

AVAILABILITY: QuIN’s web server is available at http://quin.jax.org QuIN is developed in Java and JavaScript, utilizing an Apache Tomcat web server and MySQL database and the source code is available under the GPLV3 license available on GitHub:https://github.com/UcarLab/QuIN/.

Address of the bookmark: http://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1004809

For the full list of features, improvements and fixes, see the release notes:https://ncbi.nlm.nih.gov/tools/gbench/releasenotes

New Features

• BLAST Tool: added support for local custom BLAST databases
• Graphical Sequence View: added log scaling option for graph tracks
• Generic Table View: new tutorial added

Bug Fixes and Improvements

• Project Tree View: Genomic Collections/Assemblies now show accessions, not just names
• Tree View: layout updated to better accommodate nodes of different sizes
• Table Import Dialog (MacOS): fixed issue with table visibility
• Fixed bug where different molecules IDs in GenBank could resolve to the same sequence
• Graphical Sequence View: fixed issue where sequence track was not shown for some sequences
• Graphical Sequence View: fixed protein coloration methods
• Graphical Sequence View: improved rendering of Markers to better indicate boundaries and produce higher quality PDF images
• Create Gene Model tool: fixed scenario when gene model tool failed with local sequences
• Search View: ORF Finder – fixed incorrect protein lengths
• Fixed bug with not opening project file (.gbp) on a click
• Fixed issues in GVF import
• Fixed BLAST Search tool against NCBI databases not working
• Fixed tblastn (protein BLAST) not working in standalone mode
• Fixed GTF export failure

 UPARSE >
OTU clustering for 16S and other marker genes. Highly accurate OTU sequences and improved diversity measures. UCHIME >
Chimeric sequence detection. PILER >
De novo genome repeat finder. PILER-CR >
Detection of CRISPR repeats in bacterial genomes. QSCORE >
Compare two multiple alignments for benchmarking. PALS >
Whole-genome alignment. PREFAB >
Protein Reference Alignment Database. MSA benchmark collection >
Selected multiple alignment benchmarks in a standardized FASTA format.

Address of the bookmark: http://drive5.com/software.html

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”