BOL: Related items

Synima: a Synteny imaging tool for annotated genome assemblies

Abhimanyu Singh — Tue, 30 Oct 2018 10:49:13 -0500

Synima written in Perl, which uses the graphical features of R. Synima takes orthologues computed from reciprocal best BLAST hits or OrthoMCL, and DAGchainer, and outputs an overview of genome-wide synteny in PDF. Each of these programs are included with the Synima package, and a pipeline for their use. Synima has a range of graphical parameters including size, colours, order, and labels, which are specified in a config file generated by the first run of Synima – and can be subsequently edited. Synima runs quickly on a command line to generate informative and publication quality figures. Synima is open source and freely available from https://github.com/rhysf/Synima under the MIT License.

Address of the bookmark: https://github.com/rhysf/Synima

JUNIOR RESEARCH FELLOW POSITION at School of Biotechnology, Gautam Buddha University Greater Noida

Tue, 01 Apr 2014 14:46:57 -0500

Walk-In Interview for one position of Junior Research Fellow (JRF) in a SERB, Department of Science and Technology (DST) funded research project entitled “Design and evaluation of novel Beta-3 adrenoreceptor agonists for potential antidepressant activity” under the supervision of Dr. Shakti Sahi which was scheduled on 31st March, 2014 is now re-scheduled on account of public holiday.

The interview will now be held 01st April 2014. The monthly fellowship of JRF will be Rs 12,000/- plus HRA as per the University rules.

Essential Qualification: Master degree in any discipline of Life Science with NET qualified or valid GATE score.

Desirable Qualification: Preference will be given to candidates having research experience in Bioinformatics.

The interested candidates should report for the Interview on 01st April, 2014 at 10:00 am in the Conference Room of Dean, School of Biotechnology, First floor, Gautam Buddha University, Greater Noida. Interested candidates may also send their resume to undersigned by postmail/e-mail shaktis@gbu.ac.in or shaktisahi@gmail.com. No TA and DA will be paid for appearing for the interview.

Dr. Shakti Sahi
(Principle Investigator)
School of Biotechnology
Gautam Buddha University
Greater Noida
Ph:9971791897

www.gbu.ac.in/Recruitment/JRF_advertisement_DSTProject_Shakti_26March14.pdf

ClipCrop: a tool for detecting structural variations with single-base resolution using soft-clipping information

BioJoker — Sun, 20 Jan 2019 06:34:36 -0600

ClipCrop for detecting SVs with single-base resolution using soft-clipping information. A soft-clipped sequence is an unmatched fragment in a partially mapped read. To assess the performance of ClipCrop with other SV-detecting tools, we generated various patterns of simulation data – SV lengths, read lengths, and the depth of coverage of short reads – with insertions, deletions, tandem duplications, inversions and single nucleotide alterations in a human chromosome.

Address of the bookmark: https://github.com/shinout/clipcrop

Postodoc in Computational/Systems Biology and Machine Learning

Wed, 09 Apr 2014 20:47:57 -0500

One profile of Computational/Systems Biology and Machine Learning at Postdoc level is needed at the Laboratory of Immunobiology of Neurological Disorders led by Cinthia Farina, Institute of Experimental Neurology, Ospedale San Raffaele, Milano. The projects of interest for this application involve research on translational bioinformatics in complex human disorders.

You have a PhD in Computational Science, Bioinformatics, or equivalent.

Especially relevant skills for the profile are:
1. In-depth understanding and implementation of methods and development of
algorithms for statistical and machine learning classification, clustering, predictive
modelling.
2. Experience on transcriptomics and clinical data analysis, in particular gene regulatory networks, protein interactomes, development of diagnostic tools.

3. Solid experience with data mining, bioinformatics programming and statistics for bioinformatics.
4. Flexibility and willing to work across multiple projects and technology in a rapidly evolving scientific context.

Candidates with programming/scripting experience are also welcome. In particular, proficiency in one or more mainstream programming languages (C, C++, Java, Python, Perl, etc.), together with the understanding of relational database design and SQL/DBMS systems (e.g. MySQL, PHP, Oracle).
Experience with the analysis of next-generation sequencing data is a plus.
Clear demonstration of experience in analysis and modelling of omics and clinical data must be provided.

Interested candidates should send to farina.cinthia@hsr.it:

1. CV (please show evidences of relevant titles, projects, courses, references, etc.)
2. One page with a list of research topics (i.e. ongoing projects)
3. earliest availability
4. 2-3 contact names

Minipolish: A tool for Racon polishing of miniasm assemblies

BioStar — Tue, 03 Dec 2019 02:40:54 -0600

Miniasm is a great long-read assembly tool: straight-forward, effective and very fast. However, it does not include a polishing step, so its assemblies have a high error rate – they are essentially made of stitched-together pieces of long reads.

Racon is a great polishing tool that can be used to clean up assembly errors. It's also very fast and well suited for long-read data. However, it operates on FASTA files, not the GFA graphs that miniasm makes.

That's where Minipolish comes in. With a single command, it will use Racon to polish up a miniasm assembly, while keeping the assembly in graph form.

It also takes care of some of the other nuances of polishing a miniasm assembly:

Adding read depth information to contigs
Fixing sequence truncation that can occur in Racon
Adding circularising links to circular contigs if not already present (so they display better in Bandage)
'Rotating' circular contigs between polishing rounds to ensure clean circularisation

Address of the bookmark: https://github.com/rrwick/Minipolish

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

“On” and “Off” the neuron !!!

Rahul Nayak — Fri, 25 Apr 2014 19:31:13 -0500

Optogenetics is a recent innovation in neuroscience that gives researchers the ability to control the activity of neurons with light. With this powerful tool, researchers are teasing apart the biological basis of memory, behavior, and disease (see “Scientists Make Mice ‘Remember’ Things That Didn’t Happen” and “An On-Off Switch for Anxiety,”). But for the first several years of this technology’s existence, the proteins that scientists added to neurons to make them react to light were only good at activating neurons. That limited researchers’ ability to understand neuronal circuits, sets of interconnected neurons that are thought to control behavior and, when misfiring, to underlie many brain conditions. Problems can arise from any imbalance in circuit activity, whether too much or too little.

Now, two research groups have engineered new optogenetic proteins that can be used to efficiently silence neurons. One of the two new proteins comes from the lab of Karl Deisseroth, a psychiatrist and neuroscientist at Stanford University who helped develop optogenetics as a research tool. His group’s new “off” switch for neurons was created by changing 10 of the 333 amino acids in an existing optogenetic protein, which itself had been engineered by combining natural proteins from green algae. That advance “creates a powerful tool that allows neuroscientists to apply a brake in any specific circuit with millisecond precision,” said Thomas Insel, director of the National Institute of Mental Health, in a released statement. The other new silencing protein, developed by scientists at the Humboldt University of Berlin and collaborators, was created by changing amino acids in the same existing optogenetic protein.

Some researchers are also looking to optogenetics as a potential treatment for patients with a variety of conditions (see “For Mice, and Maybe Men, Pain Is Gone in a Flash,” and “Flipping on the Lights to Halt Seizures”) but there are huge challenges to overcome. The method requires genetic modification of cells to make them light-sensitive. It also requires implanted light sources for all but the shallowest of nerve endings.

GSP4PDB: a web tool to visualize, search and explore protein-ligand structural patterns

Neel — Sun, 15 Mar 2020 03:41:12 -0500

GSP4PDB is a user-friendly and efficient application to search and discover new patterns of protein-ligand interaction.

GSP4PDB is part of the services provided by the Bioinformatic Group of the University of Talca

http://gdblab.com/gsp4pdb/gsp4pdb2/

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-3352-x

Address of the bookmark: http://gdblab.com/gsp4pdb/gsp4pdb2/

Check Linux server configuration !!

Rahul Nayak — Tue, 06 May 2014 01:10:57 -0500

Bioinformatician uses servers for computational analysis. Sometime we need to check the server details before running our programs or tools. Here I am showing some basic commands using them you can gather the system/server information.

To check what version of Operating System is installed on the server you can use the following commands:-
=================================================================
1.cat /etc/issue
[root@localhost ~]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
Kernel \r on an \m

2.cat /etc/redhat-release
[root@localhost ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)

3.lsb_release -a
[root@localhost ~]# lsb_release -a
LSB Version:    :core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: RedHatEnterpriseServer
Description:    Red Hat Enterprise Linux Server release 5.5 (Tikanga)
Release:        5.5
Codename:       Tikanga

To check whether the operating system is 32 or 64bit:-
================================
# uname -i
[root@localhost ~]# uname -i
i386
(i386 represents that server is having 32bit operating system)

[root@localhost ~]# uname -i
x86_64
(x86_64 represents that server is having 64bit operating system)

To see the processor/CPU information:-
=============================
# cat /proc/cpuinfo
[root@localhost ~] cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Xeon(R) CPU            5130 @ 2.00GHz
stepping        : 6
cpu MHz         : 1995.087
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 3990.17
(Here processor number 0 indicates that the system is having one process(processor number starts with zero))

To check memory information:-
===========================
# free -m
[root@localhost ~]# free -m
             total       used       free     shared    buffers     cached
Mem:          5066       3513       1552          0        612       2319
-/+ buffers/cache:        582       4484
Swap:         1983          0       1983

# cat /proc/meminfo
[root@localhost ~]# cat /proc/meminfo
MemTotal:      5187752 kB
MemFree:       1639300 kB
Buffers:        627024 kB
Cached:        2374944 kB
SwapCached:          0 kB
Active:        2458788 kB
Inactive:       920964 kB
HighTotal:     4325164 kB
HighFree:      1561936 kB
LowTotal:       862588 kB
LowFree:         77364 kB
SwapTotal:     2031608 kB
SwapFree:      2031608 kB
Dirty:             704 kB
Writeback:           0 kB
AnonPages:      377892 kB
Mapped:          35328 kB
Slab:           153036 kB
PageTables:       6316 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:   4625484 kB
Committed_AS:   977132 kB
VmallocTotal:   116728 kB
VmallocUsed:      4492 kB
VmallocChunk:   112124 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
Hugepagesize:     2048 kB

To check the model and serial name of the server:-
=======================================
[root@localhost ~]# dmidecode | egrep -i "product name|Serial number"
Product Name: PowerEdge R710
Serial Number: AB8CDE1


To check the host name:-
=====================
[root@localhost ~]# uname -n
localhost

[root@localhost ~]# hostname
localhost

To check the kernel version:-
========================
[root@localhost ~]# uname -r
2.6.18-238.9.1.el5PAE

mixtureS: a novel tool for bacterial strain reconstruction from reads

BioStar — Fri, 21 Aug 2020 08:23:19 -0500

mixtureS that can de novo identify bacterial strains from shotgun reads of a clonal or metagenomic sample, without prior knowledge about the strains and their variations. Tested on 243 simulated datasets and 195 experimental datasets, mixtureS reliably identified the strains, their numbers and their abundance. Compared with three tools, mixtureS showed better performance in almost all simulated datasets and the vast majority of experimental datasets.

Availability

The source code and tool mixtureS is available at http://www.cs.ucf.edu/˜xiaoman/mixtureS/.

Address of the bookmark: http://www.cs.ucf.edu/~xiaoman/mixtureS/