BOL: Related items

e-RGA: enhanced Reference Guided Assembly of Complex Genomes

Jit — Mon, 19 Dec 2016 05:56:14 -0600

Next Generation Sequencing has totally changed genomics: we are able to produce huge amounts of data at an incredibly low cost compared to Sanger sequencing. Despite this, some old problems have become even more difficult, de novo assembly being on top of this list. Despite efforts to design tools able to assemble, de novo, an organism sequenced with short reads, the results are still far from those achievable with long reads. In this paper, we propose a novel method that aims to improve de novo assembly in the presence of a closely related reference. The idea is to combine de novo and reference-guided assembly in order to obtain enhanced results.

Address of the bookmark: http://journal.embnet.org/index.php/embnetjournal/article/view/208

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

GAM-NGS: genomic assemblies merger for next generation sequencing

Jit — Mon, 19 Dec 2016 06:07:05 -0600

GAM-NGS (Genomic Assemblies Merger for Next Generation Sequencing), whose primary goal is to merge two or more assemblies in order to enhance contiguity and correctness of both. GAM-NGS does not rely on global alignment: regions of the two assemblies representing the same genomic locus (called blocks) are identified through reads' alignments and stored in a weightedgraph. The merging phase is carried out with the help of this weighted graph that allows an optimal resolution of local problematic regions.

Address of the bookmark: https://github.com/vice87/gam-ngs

Genome Assembly Tutorial

Abhimanyu Singh — Tue, 20 Dec 2016 07:56:01 -0600

If genomes were completely random sequences in a statistical sense, 'overlap-consensus-layout' method would have been enough to assemble large genomes from Sanger reads. In contrast, real genomes often have long repetitive regions, and they are hard to assemble using overlap-consensus-layout approach. De Bruijn graph-based assembly approach was originally proposed to handle the assembly of repetitive regions better.

More at http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

Address of the bookmark: http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

MetaBAT: An Efficient Tool for Accurately Reconstructing Single Genomes from Complex Microbial Communities

Jit — Mon, 06 Mar 2017 03:44:34 -0600

MetaBAT, An Efficient Tool for Accurately Reconstructing Single Genomes from Complex Microbial Communities

Grouping large genomic fragments assembled from shotgun metagenomic sequences to deconvolute complex microbial communities, or metagenome binning, enables the study of individual organisms and their interactions. Here we developed an automated metagenome binning software, called MetaBAT, which integrates empirical probabilistic distances of genome abundance and tetranucleotide frequency. Tested on both synthetic and real metagenome datasets, MetaBAT outperforms alternative methods in both accuracy and computational efficiency. Applying MetaBAT to an assembly from 1,704 human gut samples formed 1,634 genome bins (>200kb) in 3 hours, where 621 genome bins are >50% complete with <5% contamination from other species. Further analysis shows that the quality of these genome bins approaches manually curated genomes.

Address of the bookmark: https://bitbucket.org/berkeleylab/metabat

Mercator

Jit — Mon, 06 Feb 2017 04:20:36 -0600

Our basic strategy in building homology maps is to use exons that are orthologous in multiple genomes as map "anchors." Given K genomes, the steps in the map construction are as follows:

For each genome, obtain a set of exon annotations. These annotations can be a combination of both exon predictions (e.g. Genscan) and annotations that have been experimentally verified (e.g. RefSeq). Ideally, we would like to have these annotations be as sensitive as possible. Specificity is not a concern, as incorrect annotations are not likely not have significant alignments with other gene annotations.
Compare all exons against all exons in other genomes and record significant alignments between exons. Currently, we use BLAT to do this all-vs-all comparison with alignments being performed in protein space.
Construct a graph with each vertex corresponding to a exon and edges between vertices whose corresponding exons have significant alignments.
Identify cliques in this graph. These cliques are potential anchors to be used in the map.
Starting with the largest cliques (those that have exons in all or most of the genomes), join neighboring (adjacent in genomic coordinates, in each genome) cliques to form runs. Smaller cliques that are inconsistent with runs formed by larger cliques are filtered out. After the smallest cliques have been considered, cliques that are not part of a run are discarded.
The extents of each run in each genome are outputted as orthologous segments. The cliques from each run are used to output the exact genomic coordinates of anchors within each orthologous segment. These anchors can be used by genomic alignment programs (such as MAVID) to do a detailed alignment of each orthologous segment.

https://www.biostat.wisc.edu/~cdewey/mercator/

Address of the bookmark: https://www.biostat.wisc.edu/~cdewey/mercator/

BRIG

Jit — Thu, 16 Feb 2017 13:14:25 -0600

BRIG is a free cross-platform (Windows/Mac/Unix) application that can display circular comparisons between a large number of genomes, with a focus on handling genome assembly data. The application is available at:http://sourceforge.net/projects/brig

If you have any questions or comments, post them on one of the trackers on BRIG’s SourceForge page:http://sourceforge.net/tracker/?group_id=328245.

Features:

Images show similarity between a central reference sequence and other sequences as concentric rings.
BRIG will perform all BLAST comparisons and file parsing automatically via a simple GUI.
Contig boundaries and read coverage can be displayed for draft genomes; customized graphs and annotations can be displayed.
Using a user-defined set of genes as input, BRIG can display gene presence, absence, truncation or sequence variation in a set of complete genomes, draft genomes or even raw, unassembled sequence data.
BRIG also accepts SAM-formatted read-mapping files enabling genomic regions present in unassembled sequence data from multiple samples to be compared simultaneously

Address of the bookmark: http://brig.sourceforge.net/

PBSuite: Software for Long-Read Sequencing Data from PacBio

Jit — Mon, 27 Feb 2017 09:54:47 -0600

PBJelly - the genome upgrading tool.
PBHoney - the structural variation discovery tool

Both are contained within the PBSuite code found in downloads.

----- PBJelly -----
Read The Paper
http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0047768

PBJelly is a highly automated pipeline that aligns long sequencing reads (such as PacBio RS reads or long 454 reads in fasta format) to high-confidence draft assembles. PBJelly fills or reduces as many captured gaps as possible to produce upgraded draft genomes.

----- PBHoney -----
Read The Paper
http://www.biomedcentral.com/1471-2105/15/180/abstract

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Address of the bookmark: https://sourceforge.net/projects/pb-jelly/

Multi-metagenome assembly

Radha Agarkar — Fri, 03 Mar 2017 10:14:18 -0600

This project contains scripts and tutorials on how to assemble individual microbial genomes from metagenomes, as described in:

Genome sequences of rare, uncultured bacteria obtained by differential coverage binning of multiple metagenomes

Mads Albertsen, Philip Hugenholtz, Adam Skarshewski, Gene W. Tyson, Kåre L. Nielsen and Per .H. Nielsen

Nature Biotechnology 2013, doi: 10.1038/nbt.2579

Address of the bookmark: https://github.com/MadsAlbertsen/multi-metagenome