BOL: Related items

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

Faculty post at Zhejiang University

Tue, 10 Jun 2014 03:40:40 -0500

Zhejiang University (ZJU) is seeking faculty candidates for its newly launched, highly competitive and well funded “Hundred Talents Program”. This search covers all colleges and departments at ZJU. Applicants, expected to be about 35 years old, should hold PhD degree, and postdoctoral experiences are preferred for applicants in most fields. Applicants should have demonstrated commitment to excellence in teaching and research at a level comparable to the academic achievement of assistant professor or associate professor in world-renowned universities. Successful candidates must work full-time and are expected to establish internationally competitive and independent research program in cutting-edge areas of the relevant field at ZJU.

As one of the leading research-intensive universities in China, ZJU is located in the beautiful city of Hangzhou. Successful candidates will be employed as Principal Investigators and are qualified to supervise doctoral students. ZJU will offer an internationally competitive salary and the opportunity to purchase university's apartment at a price much lower than the market price, and will provide office and laboratory spaces as well as internationally competitive research startup packages.

Qualified applicants are strongly encouraged to submit their applications electronically to tr@zju.edu.cn. Applicants should include the following materials in pdf format: a comprehensive CV, a statement of research and teaching plan, and a list of 3 to 5 references with detailed contact information.

Contact：Talents Office, ZJU

Tel：+86-571-88981345, +86-571-88981390

Fax：+86-571-88981976

E-mail:tr@zju.edu.cn

Genome assembly stats plotting

Jit — Wed, 28 Feb 2018 03:45:39 -0600

A de novo genome assembly can be summarised b

y a number of metrics, including:

Overall assembly length
Number of scaffolds/contigs
Length of longest scaffold/contig
Scaffold/contig N50 and N90Assembly base composition, in particular percentage GC and percentage Ns
CEGMA completeness
Scaffold/contig length/count distribution

assembly-stats supports two widely used presentations of these values, tabular and cumulative length plots, and introduces an additional circular plot that summarises most commonly used assembly metrics in a single visualisation. Each of these presentations is generated using javascript from a common (JSON) data structure, allowing toggling between alternative views, and each can be applied to a single or multiple assemblies to allow direct comparison of alternate assemblies.

Tabular presentation allows direct comparison of exact values between assemblies, the limitations of this approach lie in the necessary omission of distributions and the challenge of interpreting ratios of values that may vary by several orders of magnitude.

Address of the bookmark: https://github.com/rjchallis/assembly-stats

XAMPP: Starting Apache fail Ubuntu

Ram Yash Pal — Sat, 07 Jun 2014 05:52:35 -0500

Once you install XAMMP on linux, the most common problem you face is Apache failure. To fix the issues please use following command to first stop and then again start it.

sudo /etc/init.d/apache2 stop

sudo /etc/init.d/mysql stop

sudo /etc/init.d/proftpd stop

sudo /opt/lampp/lampp start

PhpMyAdmin “Wrong permissions on configuration file, should not be world writable!”

Once the Xammp is installed, it might be possible to set up the configuration file in writable mode. Try the following steps:

Just chmod 0755 the file

sudo chmod 0755 config.inc.php

The MARVEL assembler

Jit — Fri, 04 May 2018 19:18:41 -0500

MARVEL consists of a set of tools that facilitate the overlapping, patching, correction and assembly of noisy (not so noisy ones as well) long reads.

The assembly process can be summarized as follows:

overlap
patch reads
overlap (again)
scrubbing
assembly graph construction and touring
optional read correction
fasta file creation

Address of the bookmark: https://github.com/schloi/MARVEL

Genomic Medicine - Bruce Korf (2014)

Tue, 24 Jun 2014 07:58:44 -0500

May 21, 2014 - Current Topics in Genome Analysis 2014 A lecture series covering contemporary areas in genomics and bioinformatics. More: http://www.genome.gov/COURSE2014

GAPPadder: A Sensitive Approach for Closing Gaps on Draft Genomes with Short Sequence Reads

Jit — Mon, 14 May 2018 05:25:48 -0500

This software is provided ``as is” without warranty of any kind. In no event shall the author be held responsible for any damage resulting from the use of this software. The program package, including source codes, executables, and this documentation, is distributed free of charge. If you use this program in a publication, please cite the following reference:
Chong Chu, Xin Li, and Yufeng Wu. "GAPPadder: A Sensitive Approach for Closing Gaps on Draft Genomes with Short Sequence Reads." bioRxiv (2017): 125534.

Address of the bookmark: https://github.com/Reedwarbler/GAPPadder

Faculty Positions at Central University of Punjab

Mon, 07 Jul 2014 23:33:33 -0500

Faculty Positions: Rolling/Open Advertisement Advt.No: T-10 (2013)

Pay Scale: Pay Band Rs.15600-39100 with AGP of Rs.6,000/-

Essential Qualifications for Professors, Associate Professors, and Assistant Professors: As per “UGC REGULATIONS ON MINIMUM QUALIFICATIONS FOR APPOINTMENT OF TEACHERS AND OTHER ACADEMIC STAFF IN UNIVERSITIES AND COLLEGES AND MEASURES FOR THE MAINTENANCE OF STANDARDS IN HIGHER EDUCATION 2010“ and the 2nd Amendments to the regulation issued in June 2013.

For details: http://www.ugc.ac.in/oldpdf/regulations/revised_finalugcregulationfinal10.pdf http://www.ugc.ac.in/pdfnews/8539300_English.pdf and University rules.

Procedure to apply:

Application forms along with API form complete in all respect along with necessary documents and application fee of Rs. 500/-. (Rs. 250/- for Scheduled Caste/Scheduled Tribe/Person with disabilities) should be sent to:

Registrar, Central University of Punjab, City Campus, Mansa Road, Bathinda-151001

For more info visit: http://www.centralunipunjab.com/Teaching/Final%20Details-t10-2013.pdf, http://www.centralunipunjab.com/Teaching/Advertisement-t10-2013.jpg

Last Apply Date: 31 Dec 2014

CGView - Circular Genome Viewer

Rahul Nayak — Wed, 20 Jun 2018 10:15:57 -0500

CGView is a Java package for generating high quality, zoomable maps of circular genomes. Its primary purpose is to serve as a component of sequence annotation pipelines, as a means of generating visual output suitable for the web. Feature information and rendering options are supplied to the program using an XML file, a tab delimited file, or an NCBI ptt file. CGView converts the input into a graphical map (PNG, JPG, or Scalable Vector Graphics format), complete with labels, a title, legends, and footnotes. In addition to the default full view map, the program can generate a series of hyperlinked maps showing expanded views. The linked maps can be explored using any web browser, allowing rapid genome browsing, and facilitating data sharing. The feature labels in maps can be hyperlinked to external resources, allowing CGView maps to be integrated with existing web site content or databases. For examples of the various output types, see the CGView gallery. http://wishart.biology.ualberta.ca/cgview/gallery.html http://stothard.afns.ualberta.ca/downloads/CCT/index.html https://www.gview.ca/wiki/GView/WebHome https://server.gview.ca/ http://stothard.afns.ualberta.ca/cgview_server/ Paper https://academic.oup.com/bib/advance-article/doi/10.1093/bib/bbx081/4037458

Address of the bookmark: http://wishart.biology.ualberta.ca/cgview/

Integrative Genomics Viewer (IGV) tutorial

Neel — Sat, 12 Jul 2014 15:16:23 -0500

The Integrative Genomics Viewer (IGV) from the Broad Center allows you to view several types of data files involved in any NGS analysis that employs a reference genome, including how reads from a dataset are mapped, gene annotations, and predicted genetic variants.

http://www.broadinstitute.org/igv/

Address of the bookmark: https://wikis.utexas.edu/display/bioiteam/Integrative+Genomics+Viewer+%28IGV%29+tutorial