BOL: Related items

Bioinformatics JRF/SRF position at NII

Sun, 25 May 2014 16:54:04 -0500

NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI-110067

Applications are invited for the position of Senior Research Fellow for the following time-bound sponsored project as per the details given below:

1. BTIS project on, “Bioinformatics Center-National Infrastructural Facility in the Area of Immunology” funded by DBT

Senior Research Fellow (P) (One Position only)

Dr. Debasisa Mohanty
Staff Scientist-VI
deb@nii.res.in

Qualifications: M.Sc in Biological Sciences or Biotechnology with at least 04 years of Research experience in Bioinformatics or computational Biology after the master’s degree is essential.

Emoluments: The selected candidates will draw consolidated emoluments as per Institute Rules, depending upon qualifications & experience

Rs. 18,000/- per month consolidated plus 30% HRA if Leading to Ph.D/NET/GATE Qualified otherwise Rs. 14,000/- per month + 30% HRA.

Job description: The candidate should be well versed in programming in PERL/C++/HTML/CGI, web server and portal development, computational analysis of
protein structure & function, molecular dynamics simulations and use of high performance computing systems.

GENERAL TERMS AND CONDITIONS:-

1. The candidates selected for the above posts will be on contract for one year or duration of the project whichever is shorter, at a time.
2. No hostel/ housing facility will be provided.
3. Number of posts may vary and shall be need based. Advertisement is no commitment.
4. Applicants may clearly mention the category they belong to i.e. SC/ST/OBC/PH and attach documentary proof of the same.
5. No TA/DA will be paid for attending the interview, if called for.
6. Apart from sending application in the prescribed format given below, candidates should send complete Curriculum Vitae along with the names of three referees. Curriculum Vitae should contain details of the experimental expertise.

HOW TO APPLY Interested candidates may apply directly, STRICTLY IN THE PRESCRIBED FORMAT GIVEN BELOW, through e-mail, to the Investigator of the project, clearly indicating the name of the project along with their complete C.V., e-mail id, fax numbers, telephone numbers. Only Short listed candidates will be called for interview and they required to submit attested copies of all their certificates and a Demand Draft of Rs 100/- drawn on Canara Bank or Indian Bank payable at Delhi/New Delhi in favour of the Director, NII (SC / ST and PH candidates are exempted subject to submission of documentary proof), at the time of interview.

LAST DATE OF RECEIPT OF APPLICATIONS: 06th June, 2014

www1.nii.res.in/sites/default/files/projectappointment-Dr.Mohanty-6June2014.pdf

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

Bioinformatics JRF vacancy at ICGEB, New Delhi

Wed, 23 Jul 2014 16:07:15 -0500

Junior Research Fellow for a DBT sponsored project entitled "Computational and experimental characterization of stage specific arginine methylation in P. falciparum proteome".

Candidates should have a 1st class MSc/MTech/BTech degree in Bioinformatics. Please send complete CV, quoting Application for RMETH-JRF-2014, by email to Dr. Dinesh Gupta: dinesh@icgeb.res.in

Closing date for applications: 6 August 2014

More at http://www.icgeb.org/tl_files/Vacancies/JRF.pdf

List of non-commercial NGS genotype-calling software

Jit — Thu, 09 Aug 2018 04:21:32 -0500

Meaningful analysis of next-generation sequencing (NGS) data, which are produced extensively by genetics and genomics studies, relies crucially on the accurate calling of SNPs and genotypes. Recently developed statistical methods both improve and quantify the considerable uncertainty associated with genotype calling, and will especially benefit the growing number of studies using low- to medium-coverage data.

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

Linux Sort Commands for Bioinformatics

Rahul Nayak — Sat, 31 May 2014 15:41:16 -0500

Almost all the scripting languages such as Perl, Python etc have built-in sort, but unfortunately none of them are as flexible as sort command. But one when it come to space efficiency GNU sort stands at the top. It can sort a 20Gb file with less than 2Gb memory. It is not trivial to implement so powerful a sort by yourself.

sort a space-delimited file based on its first column, then the second if the first is the same, and so on:
sort input.txt

sort a huge file (GNU sort ONLY):
sort -S 1500M -t $HOME/tmp input.txt > sorted.txt

sort starting from the third column, skipping the first two columns:
sort +2 input.txt

sort the second column as numbers, descending order; if identical, sort the 3rd as strings, ascending order:
sort -k2,2nr -k3,3 input.txt

sort starting from the 4th character at column 2, as numbers:
sort -k2.4n input.txt

More Linxu sort command information

If you have any sort commands you'd like to share, please add them to our comments section below. For more help, you can also type:

man sort

or

sort --help

on your Unix/Linux system.

OrthoANI: An improved algorithm and software for calculating average nucleotide identity

Abhimanyu Singh — Wed, 12 Dec 2018 08:36:08 -0600

OAT uses OrthoANI to measure the overall similarity between two genome sequences. ANI and OrthoANI are comparable algorithms: they share the same species demarcation cut-off at 95~96% and large comparison studies have demonstrated both algorithms to produce near identical reciprocal similarities. Details of the OrthoANI algorithm is given in (Lee et al. 2015). OAT employs an easy-to-follow Graphical User Interface that allow researchers to calculate OrthoANI values between genomes of interest without unfamiliar Command Line Environments. Moreover, the OAT_cmd command-line software can be integrated into preexisting bioinformatics pipelines.

Address of the bookmark: https://www.ezbiocloud.net/tools/orthoani

Next generation sequencing in R or bioconductor environment

John Parker — Mon, 02 Jun 2014 18:03:09 -0500

There are many R software and bioconductor packages for NGS data analysis, some of them are as follows

Biostrings

The Biostrings package from Bioconductor provides an advanced environment for efficient sequence management and analysis in R. It contains many speed and memory effective string containers, string matching algorithms, and other utilities, for fast manipulation of large sets of biological sequences. The objects and functions provided by Biostrings form the basis for many other sequence analysis packages. Documentation

IRanges Overview

IRanges provides the low-level infrastructure and containers for handling sets of integer ranges within Bioconductor's BioC-Seq domain. Its classes and methods provide support for many more high-level packages like GenomicRanges, ShortRead, Rsamtools, etc. Documentation

GenomicRanges Overview

The GenomicRanges package serves as the foundation for representing genomic locations within the Bioconductor project. It is built upon the IRanges infrastructure and defines three major data containers - GRanges, GRangesList and GappedAlignments - which are supporting other important BioC-Seq packages including ShortRead, Rsamtools, rtracklayer, GenomicFeatures and BSgenome. Compared to the IRanges container, the GRanges/GRangesList classes are more flexible and extensible to store additional information about sequence ranges, such as chromosome identifiers (sequence space), strand information and annotation data. Documentation

Motif Discovery

cosmo

The cosmo package allows to search a set of unaligned DNA sequences for a shared motif that may function as transcription factor binding site. The algorithm extends the popular motif discovery tool MEME (Bailey and Elkan, 1995) in that it allows the search to be supervised by specifying a set of constraints that the motif to be discovered must satisfy. Documentation

BCRANK

BCRANK is a method that takes a ranked list of genomic regions as input and outputs short DNA sequences that are overrepresented in some part of the list. The algorithm was developed for detecting transcription factor (TF) binding sites in a large number of enriched regions from high-throughput ChIP-chip or ChIP-seq experiments, but it can be applied to any ranked list of DNA sequences. Documentation

rGADEM: Documentation

MotIV: Documentation

ShortRead

The ShortRead package provides input, quality control, filtering, parsing, and manipulation functionality for short read sequences produced by high throughput sequencing technologies. While support is provided for many sequencing technologies, this package is primairly focused on Solexa/Illumina reads. Documentation

Rsamtools

Rsamtools provides functions for parsing and inspecting samtools BAM formatted binary alignment data. SAM/BAM is quickly becoming a universal standard alignment format, and is now supported by a wide variety of alignment tools. Documentation

Samtools Website
BWA (Burrows-Wheeler Alignment) Website

Additional tools for SNP analysis:

snpMatrix

BSgenome

BSgenome provides an object oriented infrastructure for interacting with a Biostring based genome sequence. BSgenome packages exist for many common genomes, and can be created to represent custom genomes. See the "How to forge a BSgenome data package" Vignette for instructions to create a new BSgenome package if a prebuilt package does not exist for your organism. Documentation

rtracklayer

rtracklayer provides an interface for exporting annotation feature data to various genome browsers and file formats (such as GFF). See the Small RNA Profiling exercise for an example of using rtracklayer to visualize alignment coverage. Documentation

biomaRt

The biomaRt package, provides an interface to a growing collection of databases implementing the BioMart software suite (http:// www.biomart.org). The package enables online retrieval of large amounts of data in a uniform way without the need to know the underlying database schemas. This data is retrieved automatically via the Internet, so it's recommended that you cache the data locally, or check versions if your code will be adversely affected by updates to these data. Documentation

ChIP-Seq Analysis Packages

Bioconductor provides various packages for analyzing and visualizing ChIP-Seq data. Only a small selection of these packages is introduced here. Additional useful introductions to this topic are: BioC ChIP-seq Case Study and BioC ChIP-Seq.

chipseq

The chipseq package combines a variety of HT-Seq packages to a pipeline for ChIP-Seq data analysis. Documentation

BayesPeak

BayesPeak is a peak calling package for identifying DNA binding sites of proteins in ChIP-Seq experiments. Its algorithm uses hidden Markov models (HMM) and Bayesian statistical methods. The following sample code introduces the identification of peaks with the BayesPeak package as well as the incorporation of read coverage information obtained by the chipseq package. Documentation [ Publication ]

PICS

The PICS package applies probabilistic inference to aligned-read ChIP-Seq data in order to identify regions bound by transcription factors. PICS identifies enriched regions by modeling local concentrations of directional reads, and uses DNA fragment length prior information to discriminate closely adjacent binding events via a Bayesian hierarchical t-mixture model. The following sample code uses the test data set from the above BayesPeak package in order to compare the results from both methods by identifying their consensus peak set. Documentation [ Publication ]

ChIPpeakAnno

The ChIPpeakAnno package provides. batch annotation of the peaks identified from either ChIP-seq or ChIP-chip experiments. It includes functions to retrieve the sequences around peaks, obtain enriched Gene Ontology (GO) terms, find the nearest gene, exon, miRNA or custom features such as most conserved elements and other transcription factor binding sites supplied by users. The package leverages the biomaRt, IRanges, Biostrings, BSgenome, GO.db, multtest and stat packages. Documentation

Additional ChIP-Seq Packages

DiffBind: Documentation

MOSAICS: Documentation

iSeq: Documentation

ChIPseqR: Documentation

ChiPsim: Documentation

CSAR: Documentation

ChIP-Seq Pipeline: PICS, rGADEM and MotIV (developer web site)

SPP: ChIP-seq processing pipeline

SPP Tutorial

MACS

SIPeS

RNA-Seq Analysis

Counting Reads that Overlap with Annotation Ranges

The GenomicRanges package provides support for importing into R short read alignment data in BAM format (via Rsamtools) and associating them with genomic feature ranges, such as exons or genes. This way one can quantify the number of reads aligning to annotated genomic regions. The package defines general purpose containers for storing genomic intervals as well as more specialized containers for storing alignments against a reference genome. The two main functions for read counting provided by this infrastructure are countOverlaps and summarizeOverlaps. For their proper usage, it is important to read the corresponding PDF manual. Documentation

Differential Gene Expression Analysis with DESeq

The DESeq package contains functions to call differentially expressed genes (DEGs) in count tables based on a model using the negative binomial distribution. It expects as input a data frame with the raw read counts per region/gene of interest (rows) for each test sample (columns). Such a count table can be imported into R or generated from BAM alignment files using the countOverlaps function as introduced above. Documentation

Differential Gene Expression Analysis with edgeR

The edgeR package uses empirical Bayes estimation and exact tests based on the negative binomial distribution to call differentially expressed genes (DEGs) in count data.

Documentation

A variety of additional R packages are available for normalizing RNA-Seq read count data and identifying differentially expressed genes (DEG):

easyRNASeq (simplifies read counting per genome feature)

DEXSeq (Inference of differential exon usage); parathyroidSE explains how to generate exon read counts in R

DEGseq

baySeq (also see: segmentSeq)

Genominator (Bullard et al. 2010)

Detection of Alternative Splice Junctions

Another utility of RNA-Seq experiments is the analysis of splice junctions. The following software suggestions provide this utility:

ERANGE
TopHat

SpliceMap

SplitSeek

DNA-Methylation Data Analysis

methylPipe
bsseq
BiSeq
Much more under BiocViews

HT-Seq Data Visualization

ggbio: ggplot2 extension for genomics data (online manual) Gviz: Plotting data and annotation information along genomic coordinates HilbertVis: Hilbert genome plots

GenomeGraphs: Plotting genomic information from Ensembl

TileQC: Flow Cell Quality Visualization

rtracklayer: R interface to genome browsers

genoPlotR: Plotting maps of genes and genomes

Genominator: Tools for storing, accessing, analyzing and visualizing genomic data.

To install all packages

source("http://bioconductor.org/biocLite.R")
biocLite()
biocLite(c("ShortRead", "Biostrings", "IRanges", "BSgenome", "rtracklayer", "biomaRt", "chipseq", "ChIPpeakAnno", "Rsamtools", "BayesPeak", "PICS", "GenomicRanges", "DESeq", "edgeR", "leeBamViews", "GenomicFeatures", "BSgenome.Celegans.UCSC.ce2"))

IQ-TREE: Efficient software for phylogenomic inference

Jit — Mon, 18 Feb 2019 04:25:11 -0600

A fast and effective stochastic algorithm to infer phylogenetic trees by maximum likelihood. IQ-TREE compares favorably to RAxML and PhyML in terms of likelihoods with similar computing time

IQ-TREE found higher likelihoods between 62.2% and 87.1% of the studied alignments, thus efficiently exploring the tree-space. If we use the IQ-TREE stopping rule, RAxML and PhyML are faster in 75.7% and 47.1% of the DNA alignments and 42.2% and 100% of the protein alignments, respectively. However, the range of obtaining higher likelihoods with IQ-TREE improves to 73.3–97.1%. IQ-TREE is freely available at http://www.cibiv.at/software/iqtree

Address of the bookmark: http://www.iqtree.org/

Postdoc position at Centre Méditerranéen de Médecine Moléculaire - Nice - France

Wed, 04 Jun 2014 07:20:57 -0500

The research group of Dr. Michele Trabucchi at the Centre Méditerranéen de Médecine Moléculaire (C3M) at INSERM U1065 (University of Nice Sophia-Antipolis, France) is seeking candidates for a Postdoctoral fellow position to start on October 2014 for 3 years funded by FRM (Fondation pour la Recherche Médicale).
The broad interest of the lab is in understanding the expression control and function of small RNAs in activated myeloid cells (visit our webpage to check research interests and publications of the group : http://www.unice.fr/c3m/EN/Equipe10.html ).

The work will focus on the functional studies of small RNAs by using next-generation sequencing approaches.

Candidates should hold a Ph.D. degree and have strong background in bioinformatics.
The University of Nice Sophia-Antipolis provides a wide range of facilities and training essential for biomedical research.

Interested applicants should send a PDF with a cover letter stating research interests and qualifications, an updated CV, a summary of previous research experience and contact information for two references to Michele Trabucchi ( mtrabucchi@unice.fr )

Homepage: http://www.unice.fr/c3m/EN/Equipe10.html

DnaSP: DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms

Neel — Wed, 25 Nov 2020 19:51:38 -0600

DnaSP, DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms using data from a single locus (a multiple sequence aligned -MSA data), or from several loci (a Multiple-MSA data, such as formats generated by some assembler RAD-seq software). DnaSP can estimate several measures of DNA sequence variation within and between populations in noncoding, synonymous or nonsynonymous sites, or in various sorts of codon positions), as well as linkage disequilibrium, recombination, gene flow and gene conversion parameters.

Address of the bookmark: http://www.ub.edu/dnasp/