Currently, there exist two versions of VirtualFlow, which are tailored to different types of tasks:

• VFLP: VirtualFlow for Ligand Preparation
• VFVS : VirtualFlow for Virtual Screenings

They use the same core technology regarding the workflow management and parallelization, and they can be used individually or in concert with each other. Additional versions are expected to arrive in the future. 

https://github.com/VirtualFlow

https://www.nature.com/articles/s41586-020-2117-z?

Address of the bookmark: https://virtual-flow.org/

ICRISAT seeks applications from Indian nationals Visiting Scientist-Computational Genomics (2 positions), to be part of a team of Centre of Excellence in Genomics (CEG), (www.icrisat.org/ceg) to work on legume genomics projects. The positions will be based at ICRISAT’s Headquarters in Patancheru, Hyderabad, India.

ICRISAT is a non-profit, non-political organization that conducts agricultural research for development in Asia and sub-Saharan Africa with a wide array of partners throughout the world. Covering 6.5 million square kilometers of land in 55 countries, the semi-arid tropics is home to over 2 billion people, with 650 million of these are the poorest of the poor. ICRISAT and its partners help empower those living in the semi-arid tropics, especially smallholder farmers, to overcome poverty, hunger, malnutrition and a degraded environment through more efficient and profitable agriculture. ICRISAT is headquartered in Greater Hyderabad, Andhra Pradesh, India and belongs to the Consortium of Centers supported by the Consultative Group on International Agricultural Research (CGIAR).

The Job: Responsibilities for these positions include:

Analyzing and handling large-scale next generation sequencing DNA and RNA data
Data mining and development of pipelines and troubleshooting
Genome diversity analysis such as SNPs, Indels, Structural Variations, population structure
Genome wide association study (GWAS) related analysis- LD analysis, hapmap and trait mapping
Expression analysis based on RNA-Seq data, annotation, gene ontology and metabolic pathway analysis
Epigenome analysis, small RNA identification
Gene family analysis, sequence level protein analysis, orthology/paralogy and molecular modelling
Compiling and analysis of results, writing reports and research papers

The Person: Ph.D. or MSc/MTech/PGDCA with two years research experience in Biotechnology, Computational biology, Agricultural/ Plant Biotechnology, Genetics, Molecular Biology or related discipline. Good knowledge of programming/scripting in at least two of following languages: Perl, C, C++, R, Shell Scripting and Python is plus.

How to apply: Please apply latest by 20 July 2014. The application should include the name of the position applied for, a letter of motivation, a full Curriculum Vita (CV), and the names and contact information of three references that are knowledgeable of the candidate’s professional qualifications and work experience. Technical details and more information about these positions can be obtained from R.K.VARSHNEY@CGIAR.ORG. All applications will be acknowledged, however only short listed candidates will be contacted.

Apply here https://recruit.zoho.com/ats/Portal.na?digest=T642sgLYWZOStExJ77cPrcM*sIMGZETWw4yPxngbmHA-

In comparative genome analysis work, we usually compare more than two genomes and looks for syntenic regions amongst them. In my research I used Evolution Highway (RH) http://eh-demo.ncsa.uiuc.edu/, which is a collaborative project designed to provide a visual means for simultaneously comparing genomes of multiple amniote species. The tool removes the burden of manually aligning these maps and allows cognitive skills to be used toward something more valuable than preparation and transformation of data. In addition to EH, attractive Circos (http://circos.ca/) is also very popular for this kind of analysis.

The EH is available online, and can be easily access and use, whereas Circos installation is not entirely straightforward. One of the most difficult parts of the installation involves installing the GD library. Since there weren't good instructions for installing this library on the internet I decided to post instructions here in case they are useful to anyone else.

Following are the steps to install GD modules in Mac OS

1. Setup

Create a folder for the files:

$ mkdir -p /SourceCache
$ cd /SourceCache

Get and unpack the required Jpeg-6b and GD libraries:
Download Jpeg-6b (http://code.google.com/p/google-desktop-for-linux-mirror/downloads/detail?name=jpeg-6b.tar.gz&can=2&q)
Download GD (http://search.cpan.org/~lds/GD-2.46/)

Place the "tar.gz" files in "/SourceCache" and double click to unpack.

2. Install libjpeg

Copy the "config.sub" and "config.guess" files to "/SourceCache". Note that your "config.sub" and ""config.guess" files may be in a slightly different location. The commands below show where they were on my machine:

$ cd /SourceCache/jpeg-6b/src
$ cp /usr/share/libtool/config/config.sub .
$ cp /usr/share/libtool/config/config.guess .

Configure libjpeg as follows. Note that this was installed on a 64 bit machine. However, this method may configure it in a 32 bit format. This may not be the best way to configure the installation but it works.

$ .configure --enable-shared
$ make

Check to see if the following directories exist on your machine. Create the missing directories in the following manner:

$ mkdir -p /usr/local/include
$ mkdir -p /usr/local/bin
$ mkdir -p /usr/local/lib
$ mkdir -p /usr/local/man/man1

Finish making and installing libjpeg:

$ make install

3. Install GD

$ cd /SourceCache/GD-2.46/GD/
$ perl Makefile.PL
$ make
$ make test (optional)
$ make html (optional)
$ make install

Other way for Mac OS
The easiest way to get a lot of these is with a program called Fink, which is similar in nature to the CPAN installer, but installs common GNU utilities. Fink is available from <http://sourceforge.net/projects/fink/>.

Follow the instructions for setting up Fink. Once it's installed, you'll want to run the following as root: fink install gd

It will prompt you for a number of dependencies, type 'y' and hit enter to install all of the dependencies. Then watch it work.

To prevent creating conflicts with the software that Apple installs by default, Fink creates its own directory tree at /sw where it installs most of the software that it installs. This means your libraries and headers for libgd will be at /sw/lib and /sw/include instead of /usr/lib and /usr/local/include. Because of these changed locations for the libraries, the Perl GD module will not install directly via CPAN, because it looks for the specific paths instead of getting them from your environment. But there's a way around that :-)

Instead of typing "install GD" at the cpan> prompt, type look GD. This should go through the motions of downloading the latest version of the GD module, then it will open a shell and drop you into the build directory. Apply below patch to the Makefile.PL file (save the patch into a file and use the command patch < patchfile.)

Then, run these commands to finish the installation of the GD module:

perl Makefile.PL
make
make test
make install
And don't forget to run exit to get back to CPAN.

Install on MS Window, using PPM

C:\Documents and Settings\Owner>ppm
PPM interactive shell (2.2.0) - type 'help' for available commands.
PPM> install GD
Install package 'GD?' (y/N): y
Installing package 'GD'...
Downloading http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW. ...
Installing C:\Perl\site\lib\auto\GD\GD.bs
Installing C:\Perl\site\lib\auto\GD\GD.dll
Installing C:\Perl\site\lib\auto\GD\GD.exp
Installing C:\Perl\site\lib\auto\GD\GD.lib
Installing C:\Perl\html\site\lib\GD.html
Installing C:\Perl\site\lib\GD.pm
Installing C:\Perl\site\lib\qd.pl
Installing C:\Perl\site\lib\auto\GD\autosplit.ix
PPM>


If you can't install it from ppm. You can download it:
http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.


BTW,All Perl 5.6.1 Modules are located at:

http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

Install the Perl GD Module on Linux

$ sudo perl -MCPAN -e shell

Since it was the first time I had run this command on this particular machine I had to answer a lot of questions but simply selected the defaults for everything as this usually works for me. Once in the CPAN shell I entered

$ install Bundle::CPAN

and selected all of the defaults again. Once the CPAN bundle had finished installing I tried to install GD::Graph by typing

$ install GD::Graph

but it failed with hundreds of errors – the first of which was

GD.xs:7:16: error: gd.h: No such file or directory

This was fixed with the following apt-get command (in the bash shell)

$ sudo apt-get install libgd2-xpm-dev

back in the CPAN shell I still couldn’t get GD::Graph to build and I guessed this was because of some left over files from the failed build. I don’t know the command to clean things up inside the CPAN shell and am too lazy to read the docs so I simply went into the .cpan/build directory in my home directory and deleted anything that started with GD – eg

$ rm -rf GD-2.35-HC_vkB

$ rm -rf GDGraph-1.44-Evfibe

and so on. Those strings at the end (VkB and so on) look random so they might be different on your machine. Then I went back into the CPAN shell and ran

$ install GD::Graph

There were a few dependencies which the script fetched and installed for me but everything worked smoothly.

Manual and other Perl Module instalation are mentioned in my previous blog @ http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

Address of the bookmark: http://www.programmingr.com/category/stype/r-job-listings/

Address of the bookmark: http://www.citrusperl.com/

To run:

perl centro.pl

http://search.cpan.org/~lds/Bio-Graphics-2.37/

Address of the bookmark: http://search.cpan.org/~lds/Bio-Graphics-2.37/

7th ADVERTISEMENT – 2014 (2)

INSPIRE Faculty Scheme: a component of “Assured Opportunity for Research Career (AORC)” under INSPIRE.

The Department of Science and Technology, Government of India, has launched the “Innovation in Science Pursuit for Inspired Research (INSPIRE)” [http://www.inspire-dst.gov.in] program in 2008.

The program aims to attract talent for study of science and careers with research. INSPIRE includes many components. The importance of Assured Career Opportunity in R&D sector has been recognized.

INSPIRE Faculty Scheme opens up an “Assured Opportunity for Research Career (AORC)” for young researchers in the age group of 27-32 years. It offers a contractual research awards to young achievers and opportunity for independent research in the near term and emerge as a future leader in the long term.

Eligibility

Essential Indian citizens and people of Indian origin including NRI/PIO status with PhD (in science, mathematics, engineering, pharmacy, medicine, and agriculture related subjects) from any recognized university in the world,

Those who have submitted their PhD Theses and are awaiting award of the degree are also
eligible. However, the award will be conveyed only after confirmation of the awarding the
PhD degree.

The upper age limit as on 1st July 2014 should be 32 years for considering support for a
period of 5 years. However, for SC and ST candidates, upper age limit will be 35 years.

Publication(s) in highly reputed Journals demonstrating research potential of the candidate.

Desirable

Candidates who are within top 1% at the School Leaving Examination, IIT-JEE rank, 1st Rank Holder either in graduation or post-graduation level university examination (which are used presently for identifying INSPIRE Scholars at under-graduate level and INSPIRE Fellows for doctoral degree)

More at http://www.inspire-dst.gov.in/faculty_scheme.html

Address of the bookmark: https://saliweb.readthedocs.io/en/latest/frontend.html