gapFinisher can fill gaps in draft genomes quickly and reliably.

Address of the bookmark: https://github.com/kammoji/gapFinisher

No.: SPU/CISST/Advt./2014-15/519

ADVERTISEMENT for Teaching Positions (Contractual)

Applications for the following Contractual Teaching Position are invited for Centre for Interdisciplinary Studies in Science and Technology (CISST), Sardar Patel University:

2. Assistant Professor (ONE) (Contractual)

For the subject of Bioinformatics

Qualifications:

(I) Good academic record as defined by the concerned university with at least 55 % marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s level

(II) Ph.D. degree in the concerned subject or in a relevant interdisciplinary subject
from an Indian University or NET/SLET clearance Contractual appointment carries a total Fixed Emoluments of Rs. 30,000/- p.m without any assurance of permanent Positions and related benefits.

An Application Form in prescribed Performa, available on University Website: www.spuvvn.edu should be filled in completely in Twelve Copies with self attested copies of certificates of qualifications and experience. Only one copy of each mark sheet be attached with the first copy of the application form. All 12 (Twelve) Application forms should be sent to Registrar’s office along with Demand Draft of Application form fee of Rs. 250/- (Non-refundable) in favour of “REGISTRAR, SARDAR PATEL UNIVERSITY, VALLABH VIDYANAGAR”. The S.C. and S.T. category candidates need not to pay Application fee.

Applicants who are in service should apply through their present employers. Candidates called for interview shall be required to attend at their own cost.

In absence of suitable candidate, the University may relax the eligibility criteria, for conditional appointment.

The last date of receipt of application by the University is 30th April, 2014

Advertisement: www.spuvvn.edu/careers/CISST%20Advt.%20April%202014.pdf

1. MISA: MISA (MIcroSAtellite) is a web-based tool that can identify SSRs in DNA sequences. It can be used to analyze nucleotide sequences from various organisms and can identify perfect, compound, and imperfect SSRs.

2. SSR Locator: SSR Locator is a web-based tool that identifies SSRs in both DNA and RNA sequences. It can identify perfect, compound, and imperfect SSRs, and can also filter out low complexity regions.

3. SciRoKo: SciRoKo is a software tool that can identify SSRs in DNA sequences. It can be used to analyze genomic and transcriptomic sequences from various organisms and can identify perfect, compound, and imperfect SSRs.

4. Primer3: Primer3 is a web-based tool that designs PCR primers for SSRs. It can design primers for perfect and imperfect SSRs, and can be used to design primers for SSRs in various organisms.

5. QDD: QDD (Quick Detection of Duplication) is a software tool that can identify SSRs in DNA sequences and can also identify duplicate loci. It can be used to analyze genomic and transcriptomic sequences from various organisms.

These are just a few examples of the many bioinformatics tools available for exploring SSRs. Depending on your specific needs and research questions, you may find that other tools are more appropriate for your analysis.

Basic Galaxy Tutorial

• RNA-Seq tutorial based on Trapnell et al. (2012) Nature Protocols

In this tutorial we cover the concepts of RNA-Seq differential gene expression (DGE) analysis using a very small synthetic dataset from a well studied organism.

Advanced Galaxy Tutorial

• RNA-Seq (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based differential expression tools:

* CuffDiff

* EdgeR

* DESeq2

Advanced Command Line Tutorial

• Graphical Output with CummeRbund introduces some basic commands using the cummeRbund package of the R programming language

You will need to install R, RStudio and cummeRbund on your PC (explained in the Tutorial). You will learn how to produce graphical output from RNA-Seq analysis previously done using a Cuffdiff analysis.

Variant Detection

Basic Galaxy Tutorial

• Variant Detection tutorial

In this tutorial we cover the concepts of detecting small variants (SNVs and indels) in human genomic DNA using a small set of reads from chromosome 22.

Advanced Galaxy Tutorial

• Variant Detection (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based variant detection tools:

* SAMtools: Mpileup

* GATK: Unified Genotyper

* FreeBayes

Each of these tools takes as its input a BAM file of aligned reads and generates a list of likely variants in VCF format

Pipelines are for those who are comfortable with using the UNIX command line; and often allow more control over branching and iteration logic.

• WGS/exome GATK-based variant calling pipeline

This is a basic variant-calling and annotation pipeline developed at the Victorian Life Sciences Computation Initiative (VLSCI), University of Melbourne. It is based around BWA, GATK and ENSEMBL and was originally designed for human (or similar) data. The master branch is configured for WGS data; there is an exome branch configured for variant calling in exome data.

To run the pipeline you will need Rubra: https://github.com/bjpop/rubra. Rubra uses the python Ruffus library: http://www.ruffus.org.uk/.

Protocols

• Familial Variant Calling

In this protocol we discuss and outline the process of calling familial related mutations.

• Somatic Variant Calling

In this protocol we discuss and outline the process of identifying somatic variants or mutations.

Assembly

Basic Galaxy Tutorial

• Genome assembly tutorial

In this tutorial we carry out de novo assembly of a microbial genome. We have also written a De novo Genome Assembly for Illumina Data Protocol for a more generic description of the method.

Protocol

• De novo Genome Assembly for Illumina Data

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes. Use our Genome assembly tutorial to learn a specific case of using Galaxy to carry out de novo assembly of a microbial genome.

Small RNAs

Basic Galaxy Tutorial

• Quality control for small RNA

This tutorial covers initial steps of the workflow for analysis of short RNA expression such as a quality control of the raw reads, processing of the raw reads for the subsequent analysis and initial quality assessment of the library.

ChIP Seq

Protocol

• ChIP-Seq

In this protocol we discuss ChIP-Seq: a method to analyze the interaction between proteins and DNA.

Amplicons

Protocol

• Amplicon Alignment

In this protocol we discuss and outline the process of aligning custom amplicons using primers for high precision.

Learn Galaxy

Introduction to Galaxy, for those who are very new to Galaxy.

Using Histories and Workflows, for those with some Galaxy knowledge.

The Galaxy project website has many tutorials and screencasts about using Galaxy and the tools, and developing new tools.

Address of the bookmark: https://genome.edu.au/wiki/Learn

However, nanopore sequencing is an emerging and rapidly developing technology. It is not clear what will be most informative. We hope that IONiseR will provide a framework for visualisation of metrics that we haven’t thought of, and welcome feedback at mike.smith@embl.de.

If you’re not interested in the quality assement of the raw or event level data, and want to jump straight to the getting FASTQ format files from fast5 files you can go straight to the final section of this document.

Address of the bookmark: https://www.bioconductor.org/packages/devel/bioc/vignettes/IONiseR/inst/doc/IONiseR.html

No of vacancies: 01

Pay scale:Rs. 15600 – 39100 + 6600/-

Essential Academic Qualifications / Experience : Good academic record as defined by the concerned university with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master's Degree level in a relevant subject from an Indian University, or an equivalent degree from an accredited foreign university.

Besides fulfilling the above qualifications, the candidate must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/ SET.

Notwithstanding anything contained in sub-clauses (a) and (b) to this Clause, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/SLET/SET for recruitment and appointment of Assistant Professor or equivalent positions in Universities/Colleges/Institutions.

NET/SLET/SET shall also not be required for such Masters Programmes in disciplines for which NET/SLET/SET is not conducted.

Apply online: http://www.psc.cg.gov.in/htm/OA_ME2014.html

Last Date for Online Registration: 22/05/2014

For more details: http://www.psc.cg.gov.in/pdf/Advertisement/ADV_ME2014.pdf

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

Address of the bookmark: https://www.molinspiration.com/

More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369