Project title: Functional Inference from Domain Architecture and Orthology

Requirements

To be accepted as a PhD student, credits corresponding to four years of full-time studies at the undergraduate level are required, including credits corresponding to at least two years of fulltime studies in chemistry, life sciences or physics, depending on the program. The credits should include courses at the advanced level (second cycle) corresponding to one year and of these one semester should be a degree thesis. In order to facilitate the evaluation of merits and suitability for the PhD studies the curriculum vitae (CV) should contain information about the extent and focus of the academic studies. The quantity (as part of an academic year) and the quality mark of courses in chemistry and physics are of particular interest. The title, number of credits and the length in full-time months of undergraduate thesis and project work, should be specified.

Information

More information about the project can be provided by the project leader. General information about the PhD training program may be requested from the director of graduate studies, Stefan Nordlund, stefan@dbb.su.se or from Lena Mäler, Head of Department (prefekt), lenam@dbb.su.se

Further information on the web:

The Department of Biochemistry and Biophysics: www.dbb.su.se

Stockholm University: www.su.se/english

Faculty of Science: www.science.su.se/english

The handbook for postgraduate students: www.doktorandhandboken.nu/english

Application The application should contain a personal letter (a letter of intent explaining why you are interested in the specific project, why you are interested in studying for a PhD, what you hope to accomplish during your PhD studies, and what skills you can bring to this project), a curriculum vitae, a list of two persons who may act as referees (with telephone numbers and e-mail addresses), copies of degree certificates and transcripts of academic records, and a copy of your undergraduate thesis and articles, if any.

In order to apply for this position, please use the Stockholm University web-based application form (where it is possible to select language):

To the application form for this position.

Welcome with your application no later than September 10, 2013.

Project leader: Erik Sonnhammer, Erik.Sonnhammer@sbc.su.se,
www.sonnhammer.sbc.su.se

Advertisement: http://www.su.se/english/about/vacancies/phd-studies/phd-position-in-biochemistry-towards-bioinformatics-1.143446

Local installation:

You can install Ribbon locally from Github by following the instructions here: https://github.com/MariaNattestad/Ribbon

Address of the bookmark: http://genomeribbon.com/

Advt. No. 3 (8)/BP/13

A walk-in-interview will be held in the Biotech Park Office at Sector G, Jankipuram, Kursi Road, Lucknow (U.P.) August 27, 2013 at 11.00 a.m. for the following posts of DBT sponsored project tenable at Biotech Park. Interested candidates fulfilling the requisite qualifications, experience and age as given below, may appear on the date of interview, before the Selection Committee. The candidate will have to join immediately.

INTERVIEW ON August 27, 2013 at 11.00 A.M.

2. SENIOR PROGRAMMER (ONE POST)

a) Educational Qualification M.Sc. Bioinformatics with minimum 60% marks with two years of relevant experience or B.Tech. Bioinformatics or Biotechnology with minimum 60% marks with two years experience in Bioinformatics.

b) Job Requirement Development of databases in multi user environment and application softwares, maintenance of website, Drug designing and QSAR study etc.

c) Desirable Knowledge of Bioinformatics tools, Windows, Linux, C++, JAVA / JAVA Script, Visual Basic, CGI, DBMS/RDBMS and HTML. Experience in various domains of bioinformatics such as structure based drug designing, Newtonian dynamics and OSAR studies.

d) Age Below 35 years (as on the date of interview)

e) Emoluments Rs. 12,000/- per month fixed.

Appointment will be made initially for one year extendable on satisfactory performance till the duration of the project.

3. SENIOR RESEARCH FELLOW: (ONE POST)

a) Educational Qualification M.Sc. in Biotechnology/Botany with minimum 60% marks and knowledge of handling database & database searching.

b) Essential Qualification Expertise in windows, Microsoft excel.

c) Desirable Good knowledge of statistical software packages like SPSS.

d) Age Below 35 years ( as on the date of interview)

e) Job Requirement: Management of database & website in multi user environment, computation of biological field data and generation of reports.

f) Emoluments

18000+ HRA for Net/GATE qualified
14000+ HRA for others

The appointment will be made till the duration of project.

Note: All the candidates should report for interview on or before 10.45 A.M.

General Conditions

The aforesaid positions are purely temporary and do not give the incumbent any right whatsoever for appointment on regular basis.
More Advertisement: http://www.biotechpark.org.in/html/jobs%20in%20Biotech%20Park/Job_2013_04.htm

See http://mash.readthedocs.org for more information.

Address of the bookmark: https://github.com/marbl/Mash/releases

if you map reads to GRCh38 or hg38, use the following:

ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/000/001/405/GCA_000001405.15_GRCh38/seqs_for_alignment_pipelines.ucsc_ids/GCA_000001405.15_GRCh38_no_alt_analysis_set.fna.gz

There are several other versions of GRCh37/GRCh38. What’s wrong with them? Here are a collection of potential issues:

More at http://lh3.github.io/2017/11/13/which-human-reference-genome-to-use

Address of the bookmark: http://lh3.github.io/2017/11/13/which-human-reference-genome-to-use

Computational and systems biology: studying the interplay between network topology and biological function, disease, and evolution in molecular (e.g., protein-protein interaction) networks.

Computational chemistry: protein folding; computational drug discovery and design.

Synthetic biology.

More at http://www.cse.nd.edu/~tmilenko/index.html

I'm running "OPERA-LG_v2.0.5/bin/preprocess_reads.pl" and have the following error:

fail to open file './temporarySam'

[bwa_aln_core] write to the disk... 0.09 sec
[bwa_aln_core] 70778880 sequences have been processed.
[bwa_aln_core] calculate SA coordinate... 161.35 sec
[bwa_aln_core] write to the disk... 0.06 sec
[bwa_aln_core] 70989574 sequences have been processed.
[main] Version: 0.7.15-r1140
[main] CMD: bwa aln -t 30 all_p_ctg.fa -
[main] Real time: 2402.523 sec; CPU: 53429.488 sec
[E::hts_open_format] Failed to open file temporarySam
samtools sort: can't open "temporarySam": No such file or directory
[bwa_aln_core] convert to sequence coordinate... 1.00 sec
[bwa_aln_core] refine gapped alignments... 6.07 sec
[bwa_aln_core] print alignments... PREPROCESS:
Fastq format is recognized
[Thu Jun 14 18:16:47 2018] Building bwa index...
bwa index -p all_p_ctg.fa /home/urbe/Tools/OPERA-LG_v2.0.6/all_p_ctg.fa
[Thu Jun 14 18:18:35 2018] Finding the SA coordinates of the reads using BWA aln...
[Thu Jun 14 18:58:37 2018] Generate alignments of reads using bwa sampe...
bwa samse -n 1 all_p_ctg.fa read.sai - | grep '\(^@\|XT:A:U\)' | /usr/local/bin/samtools view -S -h -b -F 0x4 - | /usr/local/bin/samtools sort -@ 20 -no - temporarySam > FALCON-Unzip-Scaff.bam
Mapping long-reads using blasr...
/home/urbe/Tools/SSpace/SSPACE-LongRead_v1-1/blasr -nproc 40 -m 1 -minMatch 5 -bestn 10 -noSplitSubreads -advanceExactMatches 1 -nCandidates 1 -maxAnchorsPerPosition 1 -sdpTupleSize 7 /media/urbe/MyDDrive/ONTdata/allONT/allONT.fasta /home/urbe/Tools/OPERA-LG_v2.0.6/all_p_ctg.fa | cut -d ' ' -f1-5,7-12 | sed 's/ /\t/g' > FALCON-Unzip-Scaff.map
sh: 1: /home/urbe/Tools/SSpace/SSPACE-LongRead_v1-1/blasr: Permission denied
Sorting mapping results...
sort -k1,1 -k9,9g FALCON-Unzip-Scaff.map > FALCON-Unzip-Scaff.map.sort
Analyzing sorted results...
Extracting linking information...
i3 2000 5000
i2 1000 2000
i4 5000 15000
i0 -200 300
i5 15000 40000
i1 300 1000
Repeat detection...
/home/urbe/Tools/OPERA-LG_v2.0.6/bin//filter_conflicting_edge.pl pairedEdges_i0 contig_length.dat 100 2
Illegal division by zero at /home/urbe/Tools/OPERA-LG_v2.0.6/bin//filter_conflicting_edge.pl line 93.
readline() on closed filehandle FILE at bin/OPERA-long-read.pl line 250.
rm anchor_contig_info.dat contig_length.dat filtered_edges.dat filtered_edges_cov.dat *.sai
rm: cannot remove 'anchor_contig_info.dat': No such file or directory
mv FALCON-Unzip-Scaff.bam FALCON-Unzip-Scaff-with-repeat.bam
/home/urbe/Tools/OPERA-LG_v2.0.6/bin//filter_repeat.pl FALCON-Unzip-Scaff-with-repeat.bam repeat.dat | /usr/local/bin/samtools view - -h -S -b > FALCON-Unzip-Scaff.bam
rm FALCON-Unzip-Scaff-with-repeat.bam
/home/urbe/Tools/OPERA-LG_v2.0.6/bin/OPERA-LG config > log
Analyzing 1 library: FALCON-Unzip-Scaff.bam
min library mean : 0
minimum contig length is 500
Current library: 1 out of 7
Analyzing file: pairedEdges_no_repeat_i0
Analyzing file: pairedEdges_no_repeat_i1
Analyzing file: pairedEdges_no_repeat_i2
Analyzing file: pairedEdges_no_repeat_i3
Analyzing file: pairedEdges_no_repeat_i4
Analyzing file: pairedEdges_no_repeat_i5
ln -s results/scaffoldSeq.fasta scaffoldSeq.fasta

To resolve this, try downloading blasr version 1.3 above and re-run :)