Screen is like a window manager for your console. It will allow you to keep multiple terminal sessions running and easily switch between them. It also protects you from disconnection, because the screen session doesn’t end when you get disconnected.

You’ll need to make sure that screen is installed on the server you are connecting to. If that server is Ubuntu or Debian, just use this command:

sudo apt-get install screen

Now you can start a new screen session by just typing screen at the command line. You’ll be shown some information about screen. Hit enter, and you’ll be at a normal prompt.

To disconnect (but leave the session running)

Hit Ctrl + A and then Ctrl + D in immediate succession. You will see the message [detached]

To reconnect to an already running session

screen -r

To reconnect to an existing session, or create a new one if none exists

screen -D -r

To create a new window inside of a running screen session

Hit Ctrl + A and then C in immediate succession. You will see a new prompt.

To switch from one screen window to another

Hit Ctrl + A and then Ctrl + A in immediate succession.

To list open screen windows

Hit Ctrl + A and then W in immediate succession

Overview of SLiM and msprime

SLiM: Forward Genetic Simulator

SLiM is a free, open-source tool designed for forward genetic simulations. It allows researchers to model complex evolutionary scenarios, including selection, recombination, and demographic events, making it particularly useful for studying adaptation and selection in populations.

Key Features of SLiM:

• Simulates population evolution forward in time

• Supports custom evolutionary models using an embedded scripting language

• Allows modeling of spatial and ecological dynamics

• Provides high flexibility and extensibility for user-defined scenarios

• Available on GitHub as an open-source project

msprime: Ancestry and Mutation Simulator

msprime is an efficient, open-source tool that simulates ancestry and mutations using a coalescent framework. It is known for its high-speed performance and low memory requirements, making it a popular choice for large-scale genomic simulations.

Key Features of msprime:

• Implements coalescent simulations for ancestry modeling

• Efficiently simulates large population histories

• Supports the addition of mutations to genealogies

• Developed using an open-source community model

• Often faster and more memory-efficient than alternative simulators

Using SLiM and msprime with slendr

Both SLiM and msprime can be integrated with slendr, a framework that facilitates structured population genetic simulations. This integration allows for seamless comparison of simulation outputs.

How They Work Together:

• SLiM and msprime simulations can be analyzed within slendr.

• The ts_read() function in slendr enables loading and comparing tree sequence outputs from both simulators.

• This integration allows researchers to validate simulation results and gain deeper insights into evolutionary processes.

Performance Considerations

While SLiM offers powerful forward simulations with extensive customization, msprime is often preferred for its speed and memory efficiency when simulating ancestry and mutations. The choice between the two depends on the research goals:

• For detailed evolutionary modeling with selection and recombination: Use SLiM.

• For large-scale coalescent simulations with mutations: Use msprime.

• For comparing different simulation models and their outputs: Use slendr to integrate SLiM and msprime results.

Conclusion

SLiM and msprime are valuable tools for genome simulation, each serving distinct but complementary purposes in population genetics research. By leveraging the strengths of both simulators with slendr, researchers can conduct robust and efficient evolutionary simulations, enhancing our understanding of genetic diversity and adaptation.

For more information, check out the official GitHub repositories for SLiM and msprime, and explore the slendr framework for streamlined simulation workflow

'du' – Check the size of a directory

$ du
This command ( du) gives you a list of directories that exist in the current working directory along with their sizes in kilobytes (default). The last line of the output gives you the total size of the current directory including its subdirectories.

$ du /home/jin1
The above command would give you the directory size of the directory /home/david

$ du -h
The same “du”command with some flag gives you a better output than the default one. The option '-h' stands for human readable format. Therefore, in order to print the sizes of the files / directories in your desire notation use this time suffixed with a 'k' if its kilobytes and 'M' if its Megabytes and 'G' if its Gigabytes.

$ du -ah
If you are interested in checking everything present in a folder use above mentioned command. It gives us not only the directories but also all the files that are present in the current directory. The “-a” flag displays the filenames along with the directory names in the output.

$ du -c
This gives you a grand total as the last line of the output. So if your directory occupies 30MB the last 2 lines of the output would be 30M.

$ du -s
Use this command to displays a summary of the directory size. It is the simplest way to know the total size of the current directory.

$ du -S
This would display the size of the current directory excluding the size of the subdirectories that exist within that directory. So it basically shows you the total size of all the files that exist in the current directory.

$ du --exculde=mp3
Several times it required to exclude some directory in our size calculation. In such cases the above command would display the size of the current directory along with all its subdirectories, but it would exclude all the files having the given pattern present in their filenames.

'df' - finding the disk free space / disk usage

$ df
Hmmm … now “df” command is really useful, and I guess you are going to use it over time. Typing the above command, outputs a table consisting of 6 columns. All the columns are very easy to understand. Remember that the 'Size', 'Used' and 'Avail' columns use kilobytes as the unit. The 'Use%' column shows the usage as a percentage which is also very useful.

$ df -h
Displays the same output as the previous command but the '-h' indicates human readable format. Hence instead of kilobytes as the unit the output would have 'M' for Megabytes and 'G' for Gigabytes.

Example: Linux installed on /dev/hda1
$ df -h | grep /dev/hda1

All right, this is not the only option to check the sizes and free spaces but there are a few more options that can be used with 'du' and 'df' . I will discuss it later.

Arlequin: http://cmpg.unibe.ch/software/arlequin3/

BEAGLE: http://faculty.washington.edu/browning/beagle/beagle.html

fastPHASE: http://stephenslab.uchicago.edu/software.html

GENEHUNTER: http://linkage.rockefeller.edu/soft/gh/

The Genome Analysis Toolkit:

http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit

IMPUTE2: https://mathgen.stats.ox.ac.uk/impute/impute_v2.html

MACH: http://www.sph.umich.edu/csg/abecasis/MACH/

MERLIN: http://www.sph.umich.edu/csg/abecasis/Merlin/

PHASE: http://stephenslab.uchicago.edu/software.html

PL-EM: http://www.people.fas.harvard.edu/~junliu/plem/

“Read-backed phasing” algorithm: http://www.broadinstitute.org/gsa/wiki/index.php/Read-backed_phasing_algorithm

SHAPE-IT: http://www.griv.org/shapeit/

(details of experience required)
Pay Scale:
INR Rs.12000/-P.M. + HRA
Category:
Science and Research Jobs
How To Apply:
The interested candidates should report for the Interview on 31st
March, 2014 at 10:00 am in the Conference Room of Dean, School of Biotechnology, First floor, Gautam Buddha University, Greater
Noida. Interested candidates may also send their resume to undersigned by post-mail/e-mail shaktis@gbu.ac.in or shaktisahi@gmail.com. No TA and DA will be paid for appearing for the interview
Download Official Notification:

http://www.gbu.ac.in/Recruitment/JRF_advertisement_DSTProject_Shakti_24March14.pdf

Following are the list of tools commonly used to PPIs predictions:

Protein-Protein Interaction Sites

PPISP

A consensus neural network method for predicting protein-protein interaction sites

HOMCOS

A server to predict interacting protein pairs and interacting sites by homology modeling of complex structures

HotPOINT

Prediction of protein interfaces using an empirical model

ISIS

Prediction of interaction hotspots from sequence

KFC server

Automated decision-tree approach to predicting protein-protein interaction hot spots

meta-PPISP

A meta server for predicting protein-protein interaction sites. meta-PPISP is built on three individual web servers: cons-PPISP, PINUP, and Promate

ODA

Identification of optimal surface patches with the lowest docking desolvation energy values

PINUP

Protein binding site prediction with an empirical scoring function

Other Sites (DNA, RNA, Metals)

CHED 

Web server for predicting soft metal binding sites in proteins

DBD-Hunter

A knowledge-based method for the prediction of DNA-protein interactions

DISPLAR

Given the structure of a protein known to bind DNA, the method predicts residues that contact DNA using neural network method

iDBPs

Predicts DNA binding proteins for proteins with known 3D structure.

PFplus

No. CBSH/MBGE/356

Subject: Advertisement for the award of Junior Research Fellowship.

Applications are invited for award of one Junior Research Fellowship on a consolidated fellowship of Rs. 12,000/- pm in the project “Bioinformatics Sub-DIC ”, under the Coordinatorship Dr. Anil Kumar. The fellowship is purely temporary and may continue till the duration of the project or maximum three years which ever is earlier. The appointment shall be given on six monthly review basis.

ESSENTIAL QUALIFICATION

M.Sc. Bioinformatics having research experience on In silico experimentation.

Candidates possessing the above qualifications may submit their application on
plain paper in the following format to the undersigned latest 18 April, 2014 the interviews will be held on 19 April, 2014 at 11.00 AM in the office of the undersigned. No separate letter for interview will be issued or any TA/DA will be paid for attending the interview.

Advertisement: http://www.gbpuat.ac.in/01042014_18april14_Advertisement%20for%20JRF%20Position,%20BI.pdf

Below you can find a few basic tutorials for how to run MITObim and I encorage you to give them a try with the testdata that comes with this Repo, just to make sure everything is running smoothly on your system. It'll only take a few minutes and will potentially safe you a lot of time down the line.

I provide further examples here as Jupyter notebooks. Get in touch if you feel like sharing your particular MITObim solution and I'd be happy to put it up here, too!

Address of the bookmark: https://github.com/chrishah/MITObim

Applications are invited from qualified individuals for a JRF/SRF position (sponsored by DBT/DST) at Prof. Jagan Pongubala’s laboratory, University of Hyderabad. Dr. Pongubala’s laboratory is investigating the molecular pathways that control the development of innate and adaptive immune cell types utilizing a combination of genetic, molecular and computational approaches.

JRF/SRF

Masters degree in Bioinformatics (M.Sc./M.Tech.)

Rs. 12,000+HRA
Rs. 16,000+HRA

Initial appointment is for one year and subjected to renewal up to 2 years

Candidates selected for the above position would have a choice to work on computational biology or experimental biology. Candidates interested to work on computational biology are expected to perform high-throughput sequencing (NGS) data analysis and should have a strong background in Bioinformatics & Computational Biology, good programming skills particularly Perl, Python, R and work experience in Linux environment.

Candidates interested to work on experimental biology should have work experience in techniques that are routinely used in molecular biology and mammalian cell culture. A basic knowledge of bioinformatics is also desired.

Applicants for the above positions should have a Masters degree (M.Tech/M.Sc) with an aggregate marks greater than 70% or a 7.5 CGPA. Candidates having JRF-fellowship through CSIR/UGC/ICMR/DBT will be encouraged to enroll into Ph.D. program. The interested candidates having excellent organizational skills and the ability to work in a team environment with an aspiration to learn new techniques and explore new scientific areas are requested to generate their resume using the link https://cvmkr.com/CV/new#0 and forward to pongubalajagan@gmail.com

Review of applications will begin immediately and continue until the position is filled. Eligible candidates will be called for an interview. No TA/ DA will be paid for attending the interview or at the time of joining the post. Applicants should note that the appointment is purely temporary and subjected to renewal up to three years and there is no Right to Claim for any regular appointment with the University.

Corresponding address: Jagan Pongubala, Ph.D.
Department of Animal Sciences
School of Life Sciences, Room:S44
University of Hyderabad
Gachibowli, Hyderabad 500046

Advertisement: https://www.uohyd.ac.in/images/recruitment/jrf-srf_130414.pdf

Address of the bookmark: https://github.com/knausb/vcfR