BOL: Related items

EGAD: Ultra-fast functional analysis of gene networks

Rahul Nayak — Fri, 14 Dec 2018 04:10:35 -0600

With the EGAD (Extending ‘Guilt-by-Association’ by Degree) package, we present a series of highly efficient tools to calculate functional properties in networks based on the guilt-by-association principle. These allow rapid controlled comparisons and analyses. Two of the core features are: a function prediction algorithm which is fully vectorized (neighbor_voting), allowing network characterization across even thousands of functional groups to be accomplished in minutes in cross-validation and an analytic determination of the optimal prior to guess candidates genes across multiple functional sets (calculate_multifunc, auc_multifunc).

Address of the bookmark: https://github.com/sarbal/EGAD

CSIR Nehru Science Postdoctoral Research Fellowship

Tue, 29 Nov 2016 12:34:59 -0600

CSIR Nehru Science Postdoctoral Research Fellowship

About Fellowship:
CSIR Nehru Science Postdoctoral Research Fellowship Scheme is an Research Fellowship awarded/given by HRD Ministry, Govt. of India every year to more than 100 fellows.

It was started to identify promising and young researchers with novel ideas and provide them research opportunities in the areas of basic science, engineering, medicine & agriculture.

The fellowship aims at facilitating their transition from mentored to independent research career.

In addition, check these ICTS Research Fellowships:
1.) Max-Planck Partner Group Fellowships 2017-18
2.) ICTS-Simons Postdoctoral Fellowships 2017
3.) ICTS Post Doctoral Fellowships 2017
4.) Airbus Prize Postdoctoral Fellowship 2017-18

Eligibility: To be eligible for this fellowship, you:
1.) PhD degree (within 3 years of award of PhD degree), OR
2.) Those who have submitted PhD theses.
3.) Applicants should have research publications in good impact factor SCI journals.
4.) Indian nationals, Persons of Indian Origin (PIO) & Overseas Citizen of India (OCI), a can also apply.
5.) Maximum Age Limit: 32 years.

Duration:
– 2 Years.
– extendable for a maximum of 1 more year based on performance.

Remuneration:
– Rs. 50,000/- per month plus House Rent Allowance (HRA)
– A contingency grant of Rs. 3.0 lakh per annum.
– 25% of the contingency grant can be used for domestic and international travel.

Mode of Selection: You can apply throughout the year, but selection will be made twice a year, in June and December.

How to Apply:
– Read the instructions, given at Annexure-I in this PDF file.
– And, application form is given as, Annexure-II.
– Fill the form & send it to the given address in the PDF file.

Deadline: Rolling Deadline (Applications accepted throughout the year)

Also See: Research Internship/ Fellowship in India:
1.) IIT Bombay Research Internship Awards Programme 2016-17
2.) IIT Delhi Internship Program 2016-17
3.) DAAD WISE – International Internship in Germany
4.) Summer Research Fellowship Programme| JNCASR Bangalore
5.) Indian Academy of Sciences Summer Internships 2017
6.) Winter Internship – IIT Bombay NPDE-TCA
7.) Viterbi – India Program 2017 | Research Internship in US
8.) Internship – Centre for Stem Cell Research, Vellore

Accommodation & other benefits:
– Accommodation may be provided by CSIR, if available.
– Medical benefits as per CSIR norms.

For more details:
– Check this PDF Notification of Fellowship.
– List of CSIR Labs & their work/activities can be seen at www.csir.res.in.

DBT India

Jit — Sun, 04 Dec 2016 22:30:37 -0600

Latest announcement on DBT India.

Calls

Events

Projects

Jobs

Address of the bookmark: http://www.dbtindia.nic.in/out-reach/latest-announcements/

ProteoClade: A taxonomic toolkit for multi-species and metaproteomic analysis

Jit — Wed, 18 Mar 2020 14:27:20 -0500

ProteoClade is a Python library for taxonomic-based annotation and quantification of bottom-up proteomics data. It is designed to be user-friendly, and has been optimized for speed and storage requirements.

ProteoClade helps you analyze two general categories of experiments:

Targeted Database Searches: Experiments in which a limited number of species are defined ahead of time, such as those involving Patient-Derived Xenografts (PDXs) or host-pathogen interactions. Reference protein sequence databases are used for targeted searches (ex: using Mascot, MaxQuant).
De Novo Searches: Experiments in which the organisms are unspecified ahead of time or involve samples of high taxonomic complexity. Mass spectra are analyzed in the absence of a reference database (ex: using PEAKS, PepNovo).

ProteoClade scales from two organisms to every organism in UniProt. Please refer to the complete documentation at proteoclade.readthedocs.io for installation, a user's guide, and examples.

https://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1007741

Address of the bookmark: https://github.com/HeldLab/ProteoClade

16th Congress of the European Society for Evolutionary Biology (ESEB)

Thu, 22 Dec 2016 08:08:37 -0600

Abstract submissions for our upcoming symposium on the Genomics of Adaptation that will take place as part of the 16th Congress of the European Society for Evolutionary Biology (ESEB). The conference will take place from August 20th - August 25th, 2017 in Groningen, the Netherlands.

SYMPOSIUM DESCRIPTION: Genomics of Adaptation [S16] Model organisms for life-history research are mainly studied in the lab where functional genetics is assessable. In general, however, knowledge about their eco-evolutionary dynamics, such as biotic interactions, is rare. By contrast, in organisms for which the ecology and adaptation strategies in the field are well known, we typically lack the appropriate genetic tools to investigate functionality. Advances in genomics and statistics as well as investments in evolutionary model organisms are now providing access to putatively adaptive genome-wide variation within species from across the tree of life. In this symposium, we focus on integrating life-history biology, genetics and evolutionary ecology in the genomics era.

We wish to (1) highlight the role of genetic architecture of complex traits, such as adaptations to biotic interactions or life-history traits; (2) contrast this to morphological traits which are generally thought to have a less complex genetic architecture; and (3) discuss the opportunities and drawbacks of specific model systems.

INVITED SPEAKERS: Josephine Pemberton, University of Cambridge (http://bit.ly/2hJWytJ ) Peter Tiffin, University of Minnesota (http://bit.ly/2hK7HuS )

ABSTRACT SUBMISSION The deadline for abstract submission is January 10, 2017. For more information and to submit abstracts online, please visit: http://bit.ly/2fBXlvN We look forward to an exciting symposium and seeing you all in Groningen! Sincerely, Ben Blackman, UC Berkeley Maaike de Jong, University of Bristol Bart Pannebakker, Wageningen University Noah Whiteman, UC Berkeley Jelle Zandveld, Wageningen University

RNA-seq workflow: gene-level exploratory analysis and differential expression

Jit — Sat, 09 Oct 2021 07:59:23 -0500

Here we walk through an end-to-end gene-level RNA-seq differential expression workflow using Bioconductor packages. We will start from the FASTQ files, show how these were quantified to the reference transcripts, and prepare gene-level count datasets for downstream analysis. We will perform exploratory data analysis (EDA) for quality assessment and to explore the relationship between samples, perform differential gene expression analysis, and visually explore the results.

Address of the bookmark: http://master.bioconductor.org/packages/release/workflows/vignettes/rnaseqGene/inst/doc/rnaseqGene.html

Calculate the significance of the difference between two trends

BioStar — Tue, 14 Mar 2023 05:41:53 -0500

To calculate the significance of the difference between two trends, you can use a statistical test such as a t-test or ANOVA (analysis of variance). Here are the general steps to follow:

Define your null hypothesis (H0) and alternative hypothesis (H1). For example, H0 might be that there is no significant difference between the two trends, while H1 might be that there is a significant difference.
Collect data on the two trends. Make sure that the data is independent, normally distributed, and has equal variances.
Calculate the means and standard deviations of each trend.
Calculate the test statistic using a t-test or ANOVA. The test statistic will depend on the specific test you choose, but it will generally compare the difference in means between the two trends to the variability within each trend.
Determine the p-value associated with the test statistic. The p-value represents the probability of obtaining a test statistic as extreme as the one you calculated, assuming that the null hypothesis is true.
Compare the p-value to your chosen significance level (usually 0.05 or 0.01). If the p-value is less than or equal to the significance level, reject the null hypothesis and conclude that there is a significant difference between the two trends. If the p-value is greater than the significance level, fail to reject the null hypothesis and conclude that there is not enough evidence to support a significant difference.

It's important to note that the specific details of each step will depend on the type of test you choose and the software you use to perform the analysis.

The most common methods for comparing means include:

Methods	R function	Description
T-test	t.test()	Compare two groups (parametric)
Wilcoxon test	wilcox.test()	Compare two groups (non-parametric)
ANOVA	aov() or anova()	Compare multiple groups (parametric)
Kruskal-Wallis	kruskal.test()	Compare multiple groups (non-parametric)

Many-Core Engine (MCE) for Perl example

Jit — Tue, 31 Jan 2017 05:37:50 -0600

MCE spawns a pool of workers and therefore does not fork a new process per each element of data. Instead, MCE follows a bank queuing model. Imagine the line being the data and bank-tellers the parallel workers. MCE enhances that model by adding the ability to chunk the next n elements from the input stream to the next available worker.

CORE MODULES

Three modules make up the core engine for MCE.

MCE::Core: Provides the Core API for Many-Core Engine. The various MCE options are described here.
MCE::Signal: Temporary directory creation, cleanup, and signal handling.
MCE::Util: Utility functions for Many-Core Engine.

MCE EXTRAS

There are 4 add-on modules for use with MCE.

MCE::Candy: Provides a collection of sugar methods and output iterators for preserving output order.
MCE::Mutex: Provides a simple semaphore implementation supporting threads and processes.
MCE::Queue: Provides a hybrid queuing implementation for MCE supporting normal queues and priority queues from a single module. MCE::Queue exchanges data via the core engine to enable queuing to work for both children (spawned from fork) and threads.
MCE::Relay: Enables workers to receive and pass on information orderly with zero involvement by the manager process while running.

MCE MODELS

The models take Many-Core Engine to a new level for ease of use. Two options (chunk_size and max_workers) are configured automatically as well as spawning and shutdown.

MCE::Loop: Provides a parallel loop utilizing MCE for building creative loops.
MCE::Flow: A parallel flow model for building creative applications. This makes use of user_tasks in MCE. The author has full control when utilizing this model. MCE::Flow is similar to MCE::Loop, but allows for multiple code blocks to run in parallel with a slight change to syntax.
MCE::Grep: Provides a parallel grep implementation similar to the native grep function.
MCE::Map: Provides a parallel map model similar to the native map function.
MCE::Step: Provides a parallel step implementation utilizing MCE::Queue between user tasks. MCE::Step is a spin off from MCE::Flow with a touch of MCE::Stream. This model, introduced in 1.506, allows one to pass data from one sub-task into the next transparently.
MCE::Stream: Provides an efficient parallel implementation for chaining multiple maps and greps together through user_tasks and MCE::Queue. Like with MCE::Flow, MCE::Stream can run multiple code blocks in parallel with a slight change to syntax from MCE::Map and MCE::Grep.

MISCELLANEOUS

Miscellaneous additions included with the distribution.

MCE::Examples: Describes various demonstrations for MCE including a Monte Carlo simulation.
MCE::Subs: Exports functions mapped directly to MCE methods; e.g. mce_wid. The module allows 3 options; :manager, :worker, and :getter.

REQUIREMENTS

Perl 5.8.0 or later. PDL::IO::Storable is required in scripts running PDL.

SOURCE AND FURTHER READING

The source, cookbook, and examples are hosted at GitHub.

Open Positions in Pasini’s lab

Sat, 04 Feb 2017 08:17:18 -0600

Computational Biologists
Open to PhD-student and Post-doc candidates
We are looking for wet and computational biologists to work on an ERC funded project in our
laboratory located at the Department of Experimental Oncology of the European Institute of
Oncology in Milan (Italy). The project will focus on different aspects of the function of Polycomb
Group proteins and other chromatin modifying activities in relation to their role in regulating cellular
identity in the development of adult tissues.
The candidates will be in charge of computational analysis and data management related to the
project. She/he will directly interact with the wet scientists working in our laboratory while working
embedded in the community of computational biologists present at our institution. The work will
involve the analysis of sequencing data produced with cutting edge technologies to study gene
expression and chromatin environment including data produced on rare cell populations and single
cells. The applicants must have a good knowledge of programming in python/perl/java along with
strong statistical background and performing analysis in R platform. A biological background is
also recommended however it’s not mandatory for application.
Each applicant should submit a full CV (with a detailed description of her/his background,
expertise, achievements and publication records) together with a letter of intent and at least two
contacts for recommendations (for a post-doc position). Competitive salary will be offered based
on the experience of the candidate. Non Italian as well as Italian applicants that have been working
outside Italy (>3yrs.) will have the opportunity to benefit of a full tax deduction for the first three
years of contract.
Applications should be submitted as single PDF to diego.pasini@ieo.it

Lab https://www.ieo.it/en/RESEARCH/People/Researchers/Pasini-Diego/

ONT assembly and Illumina polishing pipeline

Jit — Thu, 23 Nov 2017 10:13:42 -0600

This pipeline performs the following steps:

Assembly of nanopore reads using Canu.
Polish canu contigs using racon (optional).
Map a paired-end Illumina dataset onto the contigs obtained in the previous steps using BWA mem.
Perform correction of contigs using pilon and the Illumina dataset.

Address of the bookmark: https://github.com/nanoporetech/ont-assembly-polish