BOL: Related items

Statistics Using R with Biological Examples

Neel — Thu, 03 Nov 2016 04:55:41 -0500

This book is a manifestation of my desire to teach researchers in biology a bit more about statistics than an ordinary introductory course covers and to introduce the utilization of R as a tool for analyzing their data. My goal is to reach those with little or no training in higher level statistics so that they can do more of their own data analysis, communicate more with statisticians, and appreciate the great potential statistics has to offer as a tool to answer biological questions.

This is necessary in light of the increasing use of higher level statistics in biomedical research. I hope it accomplishes this mission and encourage its free distribution and use as a course text or supplement.

K Seefeld, May 2007

pyScaf

Bulbul — Mon, 19 Dec 2016 14:20:33 -0600

pyScaf orders contigs from genome assemblies utilising several types of information:

paired-end (PE) and/or mate-pair libraries (NGS-based mode)
long reads (NGS-based mode)
synteny to the genome of some related species (reference-based mode)

Scaffolding

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

matches not satisfying cut-offs (--identity and --overlap)
suboptimal matches (only best match of each query to reference is kept)
and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

sockeye

Jit — Fri, 17 Feb 2017 08:51:16 -0600

This sockeye software uses the Ensembl database project to import sequence and annotation information from several eukaryotic species. A user can additionally import their own custom sequence and annotation data. Individual annotation objects are displayed in Sockeye by using custom 3D models. Ensembl-derived and imported sequences can be analyzed by using a suite of multiple and pair-wise alignment algorithms. The results of these comparative analyses are also displayed in the 3D environment of Sockeye. By using the Java3D API to visualize genomic data in a 3D environment, we are able to compactly display cross-sequence comparisons. This provides the user with a novel platform for visualizing and comparing genomic feature organization.

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

ChromHMM: Chromatin state discovery and characterization

Abhimanyu Singh — Wed, 19 Apr 2017 04:06:23 -0500

ChromHMM is software for learning and characterizing chromatin states. ChromHMM can integrate multiple chromatin datasets such as ChIP-seq data of various histone modifications to discover de novo the major re-occuring combinatorial and spatial patterns of marks. ChromHMM is based on a multivariate Hidden Markov Model that explicitly models the presence or absence of each chromatin mark. The resulting model can then be used to systematically annotate a genome in one or more cell types. By automatically computing state enrichments for large-scale functional and annotation datasets ChromHMM facilitates the biological characterization of each state. ChromHMM also produces files with genome-wide maps of chromatin state annotations that can be directly visualized in a genome browser.

Address of the bookmark: http://compbio.mit.edu/ChromHMM/

R and Bioconductor Tutorial

Jitendra Narayan — Fri, 23 Aug 2013 08:23:59 -0500

This tutorial is intended to introduce users quickly to the basics of R, focusing on a few common tasks that biologists need to perform some basic analysis: load a table, plot some graphs, and perform some basic statistics. More extensive tutorials can be found on the project website and via bioconductor (not covered here).

You can add more tutorial links in comments if found new pages.

Address of the bookmark: http://manuals.bioinformatics.ucr.edu/home/R_BioCondManual

Bioinformatics Scientist, Production Bioinformatics @ South San Francisco, CA

Thu, 19 Aug 2021 08:45:24 -0500

wist is looking for a Bioinformatics Scientist to join our Production Bioinformatics Team. You will work alongside research scientists, software engineers and data scientists to further deliver on our mission to expand access to best-in-class synthetic biology and next-generation sequencing applications. You will be developing and engineering tools to better evaluate and build hardened, production quality pipelines, optimize data quality, and automate lab and bioinformatics processes. Our ideal candidate is an organized problem solver with a background in developing and building novel production-quality bioinformatics tools and packages. Equally excellent communication skills and a proven ability to work independently are required.

More at https://boards.greenhouse.io/twistbioscience/jobs/3135495?gh_src=9ecc0b941us

MinION_GC: An R script to do some QC on MinION data

Radha Agarkar — Sun, 03 Dec 2017 15:19:18 -0600

Other tools focus on getting data out of the fastq or fast5 files, which is slow and computationally intensive. The benefit of this approach is that it works on a single, small, .txt summary file. So it's a lot quicker than most other things out there: it takes about a minute to analyse a 4GB flowcell on my laptop.

https://github.com/roblanf/minion_qc

Address of the bookmark: https://github.com/roblanf/minion_qc

Dynamic chromosome breakpoints !!!

Jitendra Narayan — Wed, 13 Aug 2014 18:38:10 -0500

Cell division involves the distribution of identical genetic material, DNA, to two daughters’ cells. During this process, duplicated deoxyribonucleic acid (DNA) goes through a condensation and decondensation process. This is followed by nuclear envelope dissolution, mitotic spindle assembly, migration of the sister chromatid pairs to the metaphase plate, division and segregation of identical sets of chromosomes into daughter nuclei and nuclear envelope reformation.

The vital metaphase stage of cell division, when the sister chromatids migrated to the centre and lined up in a row, and pulled apart using attached microtubules in such a way that half the DNA ends up in each daughter cell. However, before the mitotic spindle‐mediated movement gets start and pulled DNA apart, the chromosomes are free to undergo recombination which involves the exchange of genetic material either between multiple chromosomes or between different regions of the same chromosome.

During recombination, the precise breakage of each strand, exchange between the strands, and sealing of the resulting recombined molecules happens. The “chromosomal breakpoints” refers to these places where they break. Mostly, this process occurs with a high degree of accuracy at high frequency in both eukaryotic and prokaryotic cells. But occasionally this “break and sealing/ break and reattach” process goes wrong and the reattachment happens in the wrong place which usually create disaster (with few exceptions).These chromosome disaster or abnormalities involve the gain, loss or rearrangement of visible amounts of genetic material during cell division. These abnormalities are of two type, the first one is numerical abnormalities where severe disorders are caused by the loss or gain of whole chromosomes, which affect the copy number of hundreds or even thousands of genes. The second are structural abnormalities which can be unbalanced or balanced. The former are similar to numerical abnormalities in that genetic material is either gained or lost. The natural defects in chromosome segregation are linked to cancer and several genetic diseases (http://en.wikipedia.org/wiki/List_of_genetic_disorders). Therefore, the enzymes involved in regulating cell division are still the attractive drug targets for many diseases.

Apart from certain chromosome abnormalities, these “crossing over” of segments of maternal and paternal chromosomes to form hybrid chromosomes have some evolutionary importance and considered as a driver of genetic variation. Moreover, the chromosome breakage in evolution is considered to be non-random in nature(http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.0020014). In addition the study of breakpoint regions and non-breakpoint (stable) regions of chromosomes indicates both the regions evolved in distinctly different ways ( http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2675965/). These breakage may lead to genetic diseases or participate to chromosomal rearranmgnets and contributed in development of new species.

I will try to explain the genome hotspots/Evolutionary Breakpoint Regions(EBRs)/fragile regions/weak fragments/ in my next blog.

Software for recombination detection:

RAT http://cbr.jic.ac.uk/dicks/software/RAT/

Breakpointer https://github.com/ruping/Breakpointer

DRP http://web.cbio.uct.ac.za/~darren/rdp.html

RB-finder http://www.ncbi.nlm.nih.gov/pubmed/18707535

LDhat2.0 http://ldhat.sourceforge.net/LDhat2.0/instructions.shtml

Reference:

http://www.nature.com/scitable/topicpage/genetic-recombination-514#

Image: Wikipedia , sciencelearn.org.nz

Recommended Articles:

http://www.friendshipcircle.org/blog/2012/05/22/13-chromosomal-disorders-youve-never-heard-of/

http://web.udl.es/usuaris/e4650869/docencia/segoncicle/genclin98/recursos_classe_%28pdf%29/revisionsPDF/chromosyndromes.pdf

http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2775595/table/T2/

http://learn.genetics.utah.edu/content/disorders/chromosomal/

http://www.ncert.nic.in/html/learning_basket/biology/cc&cd.pdf

dcGOR

Martin Jones — Sat, 08 Nov 2014 14:54:28 -0600

An R package for analysing ontologies and protein domain annotations has been published in PLoS Computational Biology (http://dx.doi.org/10.1371/journal.pcbi.1003929). The package is distributed as part of CRAN (http://cran.r-project.org/package=dcGOR), and also at GitHub for version control.

The dedicated website is available in http://supfam.org/dcGOR, from which several demos are also provided:

1. Analysing SCOP domains: http://supfam.org/dcGOR/demo-Fang.html

2. Analysing Pfam domains: http://supfam.org/dcGOR/demo-Basu.html

3. Analysing InterPro domains: http://supfam.org/dcGOR/demo-Customisation.html

MIT Computational Biology Group

Thu, 18 Dec 2014 14:47:01 -0600

My research group consists primarily of computer science graduate students and postdocs with expertise in algorithms, statistical inferences and machine learning, and sharing a passion for understanding fundamental biological problems.

We work in a highly interdisciplinary environment at the interface of Computer Science and Biology. Since its inception, our lab has eagerly engaged in collaborative research partnerships with biological and experimental collaborators, facilitated by our affiliation with the Broad Institute and the Computational and Systems Biology initiative (CSBi) at MIT, our participation in the Epigenome Roadmap, ENCODE, and modENCODE consortia, and by several other ongoing collaborations at MIT, Harvard, and the Harvard Medical School affiliated hospitals.

http://compbio.mit.edu/