BOL: Related items

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

Guest Lecturer - Molecular Biology & Bioinformatics

Wed, 23 Jul 2014 13:34:41 -0500

Adv. No. F.TU/ACA/GT-APP/01/14 Date: 07.07.2014

Faculty of Science

Essential Qualifications:

(i) Good academic record having at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s Degree level in a relevant subject, from an Indian University, or an equivalent degree from an accredited foreign University.

(II) Besides fulfilling the above qualifications, the candidates must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/SET.

(III) Notwithstanding anything contained in sub-clauses (i) and (ii) of clause 4.4.1 of UGC regulations 2010, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/ SLET/ SET for engagement of guest Teacher.

(IV) NET/ SLET/ SET shall also not be required for such Master’s Degree Programmes in discipline for which NET/ SLET/ SET is not conducted.

Application form along with detailed instructions can be downloaded from Tripura University website: www.tripurauniv.in. The duly filled in application forms complete in all respects may be sent so as to reach the Office of the Deputy Registrar Academic Branch, Tripura University, Suryamaninagar - 799022, Tripura on or before 31st July, 2014. The Candidates who responded against advertisement No. TU.REG/N-Advt./02/10 dated 20.02.2014 need not apply again.

For more info visit: http://www.tripurauniv.in/images/universitymedia/EmploymentNotification/Guest%20Teacher%20Advt.%20website_09072014.pdf

HiGlass: a tool for exploring genomic contact matrices and tracks.

Jit — Mon, 11 Jun 2018 09:44:49 -0500

HiGlass is a tool for exploring genomic contact matrices and tracks. Please take a look at the examples and documentation for a description of the ways that it can be configured to explore and compare contact matrices. To load private data, HiGlass can be run locally within a Docker container. The HiC data in the examples below is from Rao et al. (2014) http://higlass.io/

Address of the bookmark: http://higlass.io/

AlignQC: A tool for assessing an alignment, and generating reports that are easy to share

Jit — Tue, 07 Aug 2018 04:41:07 -0500

Long read alignment analysis. Generate a reports on sequence alignments for mappability vs read sizes, error patterns, annotations and rarefraction curve analysis. The most basic analysis only requires a BAM file, and outputs a web browser compatible xhtml to visualize/share/store/extract analysis results.

https://f1000research.com/articles/6-100/

https://github.com/jason-weirather/AlignQC

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/AlignQC/

Assistant Professor - Medical Bioinformatics

Wed, 23 Jul 2014 05:00:38 -0500

Advt. No : ME-I/A-IV/03/14

No.of Posts:01 (SC)

Pay Scale:

Pay Band of Rs.15600-39100 + Rs.6000/- GP +NPA @ 25% of Basic Pay +Learning Resource Allowance @ Rs.20,000/-P.A.+ Conveyance Allowance @ Rs. 1650/-P.M.+ Academic Allowance @ Rs.2500/- P.M. and other admissible allowances.

Qualifications:

Area of Specialization:-

Bioinformatics/Computational/Biology/Genomics/ Proteomics/ Structural Biology

1. Postgraduate qualification, e.g. Master’s Degree in Biotechnology/Bioinformatics/ Biophysics.

2. A Doctorate Degree of recognized University/Institute in a basic or allied Medical Science subject e.g. Medical Biotechnology/Biophysics. Bioinformatics/X-ray Crystallography/

Immunology/Structural Biology etc

Experience:

1.Minimum three years teaching and/or research experience in a recognized medical/research Institution in an allied medical subject after obtaining doctorate degree and preferably in Medical

Molecular Biology/ Biophysics/Structural Biology/Genomics and Clinical Proteomics/Computational Biology.

2. Minimum two publication with atleast one in international journal and atleast one as first author

Desirable:-

Consistently excellent scholastic/academic record, demonstrated ability to write grant proposal/(s) successfully, Post Doctoral training in a frontier area of medical Bioinformatics Research and of direct relevance to clinical diagnosis or patient care (preferably from a recognized top-ranking medical institution abroad)

Send your applications to O/O, Deputy Registrar, Recruitment & Establishment Cell, University of Health Sciences, Rohtak by 08.7.2014

For more details,please visit website:http://pgimsrohtak.nic.in/2014%20AP%20Advt.pdf

SeqMonk:A tool to visualise and analyse high throughput mapped sequence data

Jit — Tue, 11 Sep 2018 04:39:38 -0500

SeqMonk is a program to enable the visualisation and analysis of mapped sequence data. It was written for use with mapped next generation sequence data but can in theory be used for any dataset which can be expressed as a series of genomic positions. It's main features are:

Import of mapped data from mapped data (BAM/SAM/bowtie etc)
Creation of data groups for visualisation and analysis
Visualisation of mapped regions against an annotated genome.
Flexible quantitation of the mapped data to allow comparisons between data sets
Statistical analysis of data to find regions of interest
Creation of reports containing data and genome annotation

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/seqmonk/

The 5 reasons to mistakes at bioinformatics work !!!

Jit — Thu, 24 Jul 2014 02:51:41 -0500

When you're just starting out with biological programming, it's easy to run into complex problems that make you wonder how anyone has ever managed to write a program. There are some problems that trip up nearly every bioinformatician--everything from getting started understanding the biological problems to dealing with program design. Some random mistakes are so prominent that even experienced biological programmers do it. The 8 years in bioinformatics and my few random observations, most of them are snarky. These reasons will always take longer than expected and compel you to postpone your project deadline.

1.Stupid for biologist: Biology is so complex that it will make bioinformatician feel stupid. There are no any universal fixed rules; it can surprise you any time. So be nice to biologists who ask questions and resolve your biological puzzles. Sometime you will have no idea what the hell you were doing either.

2.Puzzling why: Do not hesitate to ask question. Especially. at the beginning of project you will have to ask a lot of questions. Instead of puzzling it out at end check out and clear your doubt even for a single error. It may can leads to wrong conclusion.

3.Running marathon: The most of the biological software’s documentation is always incomplete. In other word they are no more than 95 percent complete. Sometime a single problem can halt your entire project for months. Compilation and running the pipelines in tedious because almost all are interdependent and need proper configuration. I face the same kind of problem with Evolver :( …

4.Folders missing: The pipelines generate lots of data, and we keep them in several folders for future use. But sometime we delete them by mistake and move to recovery…

5.Digging deeper: Digging deeper is fruitful, but some time it can be catastrophic. You may get frustrated or direction less. So keep a biologist with you for rescue …. Sometime an expert computer programmer to handle your server. Remember, the server will always go down when you need it the most.

The most common frustrating common line: Why do we do this again?

KOALA: KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation

Abhimanyu Singh — Wed, 12 Dec 2018 09:16:55 -0600

KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. BlastKOALA and GhostKOALA assign K numbers to the user's sequence data by BLAST and GHOSTX searches, respectively, against a nonredundant set of KEGG GENES. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to the BlastKOALA server and can be executed in an interactive mode. See Step-by-step Instructions.

Reference: Kanehisa, M., Sato, Y., and Morishima, K. (2016) BlastKOALA and GhostKOALA: KEGG tools for functional characterization of genome and metagenome sequences. J. Mol. Biol. 428, 726-731. [pubmed] [pdf]

Address of the bookmark: https://www.kegg.jp/blastkoala/

Research Associate at Indian Institute of Chemical Technology (IICT), Hyderabad

Thu, 07 Aug 2014 01:55:21 -0500

Indian Institute of Chemical Technology (IICT), Hyderabad, a constituent of CSIR is a leading research Institute in the area of chemical sciences. The core strength of IICT lies in Organic Chemistry, and it continues to excel in this field for over six decades. The research efforts during these years have resulted in the development of several innovative processes for a variety of products necessary for human welfare such as drugs, agrochemicals, food, organic intermediates, adhesives etc. More than 150 technologies developed by IICT are now in commercial production.

CSIR-IICT is conducting Walk in Interview for the following position on a purely temporary basis for the sponsored project "GENESIS (BSC-0121) at 10.00 AM on 19th August 2014 at IICT, Hyderabad

Position : Research Associate
No of Post : One
Desired Profile : PhD in computation biology or M.Tech in Computational Biology with three years experience in relevant subject and atleast one research paper in SCI journal

Experience : Knowledge in vector and vector borne disease, disease modeling, GIS mapping and modeling.
Age : 35 years
Stipend : Rs 22000/- + HRA

Eligible candidate may download the application form from our website http://www.iictindia.org and appear for interview along with the duly filled in application form supported by bio-data and one set of attested photo copies of certificates of educational qualification, age, experience, caste, latest photograph and the cadndidates are required to bring all the original certificates for verification

Walk in Interview : 19.08.14

Minipolish: A tool for Racon polishing of miniasm assemblies

BioStar — Tue, 03 Dec 2019 02:40:54 -0600

Miniasm is a great long-read assembly tool: straight-forward, effective and very fast. However, it does not include a polishing step, so its assemblies have a high error rate – they are essentially made of stitched-together pieces of long reads.

Racon is a great polishing tool that can be used to clean up assembly errors. It's also very fast and well suited for long-read data. However, it operates on FASTA files, not the GFA graphs that miniasm makes.

That's where Minipolish comes in. With a single command, it will use Racon to polish up a miniasm assembly, while keeping the assembly in graph form.

It also takes care of some of the other nuances of polishing a miniasm assembly:

Adding read depth information to contigs
Fixing sequence truncation that can occur in Racon
Adding circularising links to circular contigs if not already present (so they display better in Bandage)
'Rotating' circular contigs between polishing rounds to ensure clean circularisation

Address of the bookmark: https://github.com/rrwick/Minipolish